[PATCH 2/2] i2c: hix5hd2: add i2c controller driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Wei Yan <sledge.yanwei@xxxxxxxxxx>

I2C drivers for hix5hd2 soc series, including following chipset
Hi3716CV200, Hi3719CV100, Hi3718CV100, Hi3719MV100, Hi3718MV100.

Signed-off-by: Wei Yan <sledge.yanwei@xxxxxxxxxx>
Signed-off-by: Zhangfei Gao <zhangfei.gao@xxxxxxxxxx>
---
 drivers/i2c/busses/Kconfig       |   16 ++
 drivers/i2c/busses/Makefile      |    1 +
 drivers/i2c/busses/i2c-hix5hd2.c |  577 ++++++++++++++++++++++++++++++++++++++
 3 files changed, 594 insertions(+)
 create mode 100644 drivers/i2c/busses/i2c-hix5hd2.c

diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index 9f7d5859cf65..13347cade35a 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -77,6 +77,22 @@ config I2C_AMD8111
 	  This driver can also be built as a module.  If so, the module
 	  will be called i2c-amd8111.
 
+config I2C_HIX5HD2
+	tristate "Hix5hd2 high-speed I2C driver"
+	help
+	  Say Y here to include support for high-speed I2C controller in the
+	  Hisilicon based 3716V200 SoCs. The IP module is private for Hisilicon,
+	  It be use on the Hisilicon media chipset from 2006 and will continue to use
+	  it.Specifically, the following versions of the chipset are supported:
+	  Hi3716CV200 (support six I2C module)
+	  Hi3719CV100 (support six I2C module)
+	  Hi3718CV100 (support six I2C module)
+	  Hi3719MV100 (support two I2C module)
+	  Hi3718MV100 (support two I2C module)
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called i2c-hix5hd2.
+
 config I2C_I801
 	tristate "Intel 82801 (ICH/PCH)"
 	depends on PCI
diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile
index dd9a7f8e873f..89d36af0efc0 100644
--- a/drivers/i2c/busses/Makefile
+++ b/drivers/i2c/busses/Makefile
@@ -47,6 +47,7 @@ obj-$(CONFIG_I2C_EG20T)		+= i2c-eg20t.o
 obj-$(CONFIG_I2C_EXYNOS5)	+= i2c-exynos5.o
 obj-$(CONFIG_I2C_GPIO)		+= i2c-gpio.o
 obj-$(CONFIG_I2C_HIGHLANDER)	+= i2c-highlander.o
+obj-$(CONFIG_I2C_HIX5HD2)	+= i2c-hix5hd2.o
 obj-$(CONFIG_I2C_IBM_IIC)	+= i2c-ibm_iic.o
 obj-$(CONFIG_I2C_IMX)		+= i2c-imx.o
 obj-$(CONFIG_I2C_IOP3XX)	+= i2c-iop3xx.o
diff --git a/drivers/i2c/busses/i2c-hix5hd2.c b/drivers/i2c/busses/i2c-hix5hd2.c
new file mode 100644
index 000000000000..13f597ba5cc7
--- /dev/null
+++ b/drivers/i2c/busses/i2c-hix5hd2.c
@@ -0,0 +1,577 @@
+/*
+ * Copyright (c) 2014 Linaro Ltd.
+ * Copyright (c) 2014 Hisilicon Limited.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * publishhed by the Free Software Foundation.
+ *
+ * Now only support 7 bit address.
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/i2c.h>
+#include <linux/io.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+
+/* Register Map */
+#define HIX5I2C_CTRL		0x00
+#define HIX5I2C_COM		0x04
+#define HIX5I2C_ICR		0x08
+#define HIX5I2C_SR		0x0c
+#define HIX5I2C_SCL_H		0x10
+#define HIX5I2C_SCL_L		0x14
+#define HIX5I2C_TXR		0x18
+#define HIX5I2C_RXR		0x1c
+
+/* I2C_CTRL_REG */
+#define I2C_ENABLE		BIT(8)
+#define I2C_UNMASK_TOTAL	BIT(7)
+#define I2C_UNMASK_START	BIT(6)
+#define I2C_UNMASK_END		BIT(5)
+#define I2C_UNMASK_SEND		BIT(4)
+#define I2C_UNMASK_RECEIVE	BIT(3)
+#define I2C_UNMASK_ACK		BIT(2)
+#define I2C_UNMASK_ARBITRATE	BIT(1)
+#define I2C_UNMASK_OVER		BIT(0)
+#define I2C_UNMASK_ALL		(I2C_UNMASK_ACK | I2C_UNMASK_OVER)
+
+/* I2C_COM_REG */
+#define I2C_NO_ACK		BIT(4)
+#define I2C_START		BIT(3)
+#define I2C_READ		BIT(2)
+#define I2C_WRITE		BIT(1)
+#define I2C_STOP		BIT(0)
+
+/* I2C_ICR_REG */
+#define I2C_CLEAR_START		BIT(6)
+#define I2C_CLEAR_END		BIT(5)
+#define I2C_CLEAR_SEND		BIT(4)
+#define I2C_CLEAR_RECEIVE	BIT(3)
+#define I2C_CLEAR_ACK		BIT(2)
+#define I2C_CLEAR_ARBITRATE	BIT(1)
+#define I2C_CLEAR_OVER		BIT(0)
+#define I2C_CLEAR_ALL		(I2C_CLEAR_START | I2C_CLEAR_END | \
+				I2C_CLEAR_SEND | I2C_CLEAR_RECEIVE | \
+				I2C_CLEAR_ACK | I2C_CLEAR_ARBITRATE | \
+				I2C_CLEAR_OVER)
+
+/* I2C_SR_REG */
+#define I2C_BUSY		BIT(7)
+#define I2C_START_INTR		BIT(6)
+#define I2C_END_INTR		BIT(5)
+#define I2C_SEND_INTR		BIT(4)
+#define I2C_RECEIVE_INTR	BIT(3)
+#define I2C_ACK_INTR		BIT(2)
+#define I2C_ARBITRATE_INTR	BIT(1)
+#define I2C_OVER_INTR		BIT(0)
+
+/*
+ * Controller operating frequency, timing values for operation
+ * are calculated against this frequency
+ */
+#define HIX5I2C_NS_TX_CLOCK	100000		/* 100k */
+#define HIX5I2C_HS_TX_CLOCK	400000		/* 400k */
+
+#define HIX5I2C_READ_OPERATION	0x01
+#define HIX5I2C_WRITE_OPERATION	0xfe
+
+enum hix5hd2_i2c_state {
+	HIX5I2C_STAT_RW_ERR = -1,
+	HIX5I2C_STAT_INIT,
+	HIX5I2C_STAT_RW,
+	HIX5I2C_STAT_SND_STOP,
+	HIX5I2C_STAT_RW_SUCCESS,
+};
+
+enum hix5hd2_i2c_speed {
+	HIX5I2C_NORMAL_SPD,	/* Fast speed upto 1Mbps */
+	HIX5I2C_HIG_SPD,	/* High speed upto 3.4Mbps */
+};
+
+struct hix5hd2_i2c {
+	struct i2c_adapter adap;
+	struct i2c_msg	*msg;
+	unsigned int msg_ptr;	/* msg index */
+	unsigned int len;	/* msg length */
+	int stop;
+	struct completion msg_complete;
+
+	unsigned int irq;
+	void __iomem *regs;
+	struct clk *clk;
+	struct device *dev;
+	spinlock_t lock;	/* IRQ synchronization */
+
+	int err;
+	enum hix5hd2_i2c_state state;
+	enum hix5hd2_i2c_speed speed_mode;
+
+	/* Controller frequency */
+	unsigned int s_clock;
+};
+
+static u32 hix5hd2_i2c_clr_pend_irq(struct hix5hd2_i2c *i2c)
+{
+	u32 val = readl_relaxed(i2c->regs + HIX5I2C_SR);
+
+	writel_relaxed(val, i2c->regs + HIX5I2C_ICR);
+
+	return val;
+}
+
+static void hix5hd2_i2c_clr_all_irq(struct hix5hd2_i2c *i2c)
+{
+	writel_relaxed(I2C_CLEAR_ALL, i2c->regs + HIX5I2C_ICR);
+}
+
+static void hix5hd2_i2c_disable_irq(struct hix5hd2_i2c *i2c)
+{
+	writel_relaxed(0, i2c->regs + HIX5I2C_CTRL);
+}
+
+static void hix5hd2_i2c_enable_irq(struct hix5hd2_i2c *i2c)
+{
+	writel_relaxed(I2C_ENABLE | I2C_UNMASK_TOTAL | I2C_UNMASK_ALL,
+		       i2c->regs + HIX5I2C_CTRL);
+}
+
+static void hix5hd2_i2c_drv_setrate(struct hix5hd2_i2c *i2c)
+{
+	u32 rate, val;
+	u32 sclh, scll, sysclock;
+
+	/* close all i2c interrupt */
+	val = readl_relaxed(i2c->regs + HIX5I2C_CTRL);
+	writel_relaxed(val & (~I2C_UNMASK_TOTAL), i2c->regs + HIX5I2C_CTRL);
+
+	rate = i2c->s_clock;
+	sysclock = clk_get_rate(i2c->clk);
+	sclh = (sysclock / (rate * 2)) / 2 - 1;
+	writel_relaxed(sclh, i2c->regs + HIX5I2C_SCL_H);
+	scll = (sysclock / (rate * 2)) / 2 - 1;
+	writel_relaxed(scll, i2c->regs + HIX5I2C_SCL_L);
+
+	/* restore original interrupt*/
+	writel_relaxed(val, i2c->regs + HIX5I2C_CTRL);
+
+	dev_dbg(i2c->dev, "%s: sysclock=%d, rate=%d, sclh=%d, scll=%d\n",
+		__func__, sysclock, rate, sclh, scll);
+}
+
+static void hix5hd2_i2c_init(struct hix5hd2_i2c *i2c)
+{
+	hix5hd2_i2c_disable_irq(i2c);
+	hix5hd2_i2c_drv_setrate(i2c);
+	hix5hd2_i2c_clr_all_irq(i2c);
+	hix5hd2_i2c_enable_irq(i2c);
+}
+
+static void hix5hd2_i2c_reset(struct hix5hd2_i2c *i2c)
+{
+	clk_disable_unprepare(i2c->clk);
+	msleep(20);
+	clk_prepare_enable(i2c->clk);
+	hix5hd2_i2c_init(i2c);
+}
+
+static int hix5hd2_i2c_wait_bus_idle(struct hix5hd2_i2c *i2c)
+{
+	unsigned long stop_time;
+	u32 int_status;
+
+	/* wait for 100 milli seconds for the bus to be idle */
+	stop_time = jiffies + msecs_to_jiffies(100);
+	do {
+		int_status = hix5hd2_i2c_clr_pend_irq(i2c);
+		if (!(int_status & I2C_BUSY))
+			return 0;
+
+		usleep_range(50, 200);
+	} while (time_before(jiffies, stop_time));
+
+	return -EBUSY;
+}
+
+static void hix5hd2_rw_over(struct hix5hd2_i2c *i2c)
+{
+	if (HIX5I2C_STAT_SND_STOP == i2c->state)
+		dev_dbg(i2c->dev, "%s: rw and send stop over\n", __func__);
+	else
+		dev_dbg(i2c->dev, "%s: have not data to send\n", __func__);
+
+	i2c->state = HIX5I2C_STAT_RW_SUCCESS;
+	i2c->err = 0;
+}
+
+static void hix5hd2_rw_handle_stop(struct hix5hd2_i2c *i2c)
+{
+	if (i2c->stop) {
+		i2c->state = HIX5I2C_STAT_SND_STOP;
+		writel_relaxed(I2C_STOP, i2c->regs + HIX5I2C_COM);
+	} else {
+		hix5hd2_rw_over(i2c);
+	}
+}
+
+static void hix5hd2_read_handle(struct hix5hd2_i2c *i2c)
+{
+	if (1 == i2c->len) {
+		/* the last byte don't need send ACK */
+		writel_relaxed(I2C_READ | I2C_NO_ACK, i2c->regs + HIX5I2C_COM);
+	} else if (i2c->len > 1) {
+		/* if i2c master receive data will send ACK */
+		writel_relaxed(I2C_READ, i2c->regs + HIX5I2C_COM);
+	} else {
+		hix5hd2_rw_handle_stop(i2c);
+	}
+}
+
+static void hix5hd2_write_handle(struct hix5hd2_i2c *i2c)
+{
+	u8 data;
+
+	if (i2c->len > 0) {
+		data = i2c->msg->buf[i2c->msg_ptr++];
+		writel_relaxed(data, i2c->regs + HIX5I2C_TXR);
+		writel_relaxed(I2C_WRITE, i2c->regs + HIX5I2C_COM);
+	} else {
+		hix5hd2_rw_handle_stop(i2c);
+	}
+}
+
+static int hix5hd2_rw_preprocess(struct hix5hd2_i2c *i2c)
+{
+	u8 data;
+
+	if (HIX5I2C_STAT_INIT == i2c->state) {
+		i2c->state = HIX5I2C_STAT_RW;
+	} else if (HIX5I2C_STAT_RW == i2c->state) {
+		if (i2c->msg->flags & I2C_M_RD) {
+			data = readl_relaxed(i2c->regs + HIX5I2C_RXR);
+			i2c->msg->buf[i2c->msg_ptr++] = data;
+		}
+		i2c->len--;
+	} else {
+		dev_dbg(i2c->dev, "%s: error: i2c->state = %d, len = %d\n",
+			__func__, i2c->state, i2c->len);
+		return -EAGAIN;
+	}
+	return 0;
+}
+
+static irqreturn_t hix5hd2_i2c_irq(int irqno, void *dev_id)
+{
+	struct hix5hd2_i2c *i2c = dev_id;
+	u32 int_status;
+	int ret;
+
+	spin_lock(&i2c->lock);
+
+	int_status = hix5hd2_i2c_clr_pend_irq(i2c);
+
+	/* handle error */
+	if (int_status & I2C_ARBITRATE_INTR) {
+		/*Bus error */
+		dev_dbg(i2c->dev, "ARB bus loss\n");
+		i2c->err = -ENXIO;
+		i2c->state = HIX5I2C_STAT_RW_ERR;
+		goto stop;
+	} else if (int_status & I2C_ACK_INTR) {
+		/* ack error */
+		dev_dbg(i2c->dev, "No ACK from device\n");
+		i2c->err = -ENXIO;
+		i2c->state = HIX5I2C_STAT_RW_ERR;
+		goto stop;
+	}
+
+	if (int_status & I2C_OVER_INTR) {
+		if (i2c->len > 0) {
+			ret = hix5hd2_rw_preprocess(i2c);
+			if (ret) {
+				i2c->err = ret;
+				i2c->state = HIX5I2C_STAT_RW_ERR;
+				goto stop;
+			}
+			if (i2c->msg->flags & I2C_M_RD)
+				hix5hd2_read_handle(i2c);
+			else
+				hix5hd2_write_handle(i2c);
+		} else {
+			hix5hd2_rw_over(i2c);
+		}
+	}
+
+stop:
+	if ((HIX5I2C_STAT_RW_SUCCESS == i2c->state &&
+	     i2c->msg->len == i2c->msg_ptr) ||
+	    (HIX5I2C_STAT_RW_ERR == i2c->state)) {
+		hix5hd2_i2c_disable_irq(i2c);
+		hix5hd2_i2c_clr_pend_irq(i2c);
+		complete(&i2c->msg_complete);
+	}
+
+	spin_unlock(&i2c->lock);
+
+	return IRQ_HANDLED;
+}
+
+static void hix5hd2_i2c_message_start(struct hix5hd2_i2c *i2c, int stop)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&i2c->lock, flags);
+	hix5hd2_i2c_clr_all_irq(i2c);
+	hix5hd2_i2c_enable_irq(i2c);
+
+	if (i2c->msg->flags & I2C_M_RD)
+		writel_relaxed(i2c->msg->addr | HIX5I2C_READ_OPERATION,
+			       i2c->regs + HIX5I2C_TXR);
+	else
+		writel_relaxed(i2c->msg->addr & HIX5I2C_WRITE_OPERATION,
+			       i2c->regs + HIX5I2C_TXR);
+
+	writel_relaxed(I2C_WRITE | I2C_START, i2c->regs + HIX5I2C_COM);
+	spin_unlock_irqrestore(&i2c->lock, flags);
+}
+
+static int hix5hd2_i2c_xfer_msg(struct hix5hd2_i2c *i2c,
+				struct i2c_msg *msgs, int stop)
+{
+	unsigned long timeout;
+	int ret;
+
+	i2c->msg = msgs;
+	i2c->msg_ptr = 0;
+	i2c->len = i2c->msg->len;
+	i2c->stop = stop;
+	i2c->err = 0;
+	i2c->state = HIX5I2C_STAT_INIT;
+
+	reinit_completion(&i2c->msg_complete);
+	hix5hd2_i2c_message_start(i2c, stop);
+
+	timeout = wait_for_completion_timeout(&i2c->msg_complete,
+					      i2c->adap.timeout);
+	if (timeout == 0) {
+		i2c->state = HIX5I2C_STAT_RW_ERR;
+		i2c->err = -ETIMEDOUT;
+		dev_warn(i2c->dev, "%s timeout=%d\n",
+			 msgs->flags & I2C_M_RD ? "rx" : "tx",
+			 i2c->adap.timeout);
+	}
+	ret = i2c->state;
+
+	/*
+	 * If this is the last message to be transfered (stop == 1)
+	 * Then check if the bus can be brought back to idle.
+	 */
+	if (i2c->state == HIX5I2C_STAT_RW_SUCCESS && stop)
+		ret = hix5hd2_i2c_wait_bus_idle(i2c);
+
+	if (ret < 0)
+		hix5hd2_i2c_reset(i2c);
+
+	return i2c->err;
+}
+
+static int hix5hd2_i2c_xfer(struct i2c_adapter *adap,
+			    struct i2c_msg *msgs, int num)
+{
+	struct hix5hd2_i2c *i2c = i2c_get_adapdata(adap);
+	int i, ret, stop;
+
+	pm_runtime_get_sync(i2c->dev);
+
+	for (i = 0; i < num; i++, msgs++) {
+		stop = (i == num - 1);
+		ret = hix5hd2_i2c_xfer_msg(i2c, msgs, stop);
+		if (ret < 0)
+			goto out;
+	}
+
+	if (i == num) {
+		ret = num;
+	} else {
+		/* Only one message, cannot access the device */
+		if (i == 1)
+			ret = -EREMOTEIO;
+		else
+			ret = i;
+
+		dev_warn(i2c->dev, "xfer message failed\n");
+	}
+
+out:
+	pm_runtime_mark_last_busy(i2c->dev);
+	pm_runtime_put_autosuspend(i2c->dev);
+	return ret;
+}
+
+static u32 hix5hd2_i2c_func(struct i2c_adapter *adap)
+{
+	return I2C_FUNC_I2C | (I2C_FUNC_SMBUS_EMUL & ~I2C_FUNC_SMBUS_QUICK);
+}
+
+static const struct i2c_algorithm hix5hd2_i2c_algorithm = {
+	.master_xfer		= hix5hd2_i2c_xfer,
+	.functionality		= hix5hd2_i2c_func,
+};
+
+static int hix5hd2_i2c_probe(struct platform_device *pdev)
+{
+	struct device_node *np = pdev->dev.of_node;
+	struct hix5hd2_i2c *i2c;
+	struct resource *mem;
+	unsigned int op_clock;
+	int ret;
+
+	i2c = devm_kzalloc(&pdev->dev, sizeof(struct hix5hd2_i2c), GFP_KERNEL);
+	if (!i2c) {
+		dev_err(&pdev->dev, "no memory for state\n");
+		return -ENOMEM;
+	}
+
+	if (of_property_read_u32(np, "clock-frequency", &op_clock)) {
+		/* use default value */
+		i2c->speed_mode = HIX5I2C_HIG_SPD;
+		i2c->s_clock = HIX5I2C_HS_TX_CLOCK;
+	} else {
+		if (op_clock >= HIX5I2C_HS_TX_CLOCK) {
+			i2c->speed_mode = HIX5I2C_HIG_SPD;
+			i2c->s_clock = HIX5I2C_HS_TX_CLOCK;
+		} else {
+			i2c->speed_mode = HIX5I2C_NORMAL_SPD;
+			i2c->s_clock = op_clock;
+		}
+	}
+
+	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	i2c->regs = devm_ioremap_resource(&pdev->dev, mem);
+	if (IS_ERR(i2c->regs))
+		return PTR_ERR(i2c->regs);
+
+	i2c->clk = devm_clk_get(&pdev->dev, NULL);
+	if (IS_ERR(i2c->clk)) {
+		dev_err(&pdev->dev, "cannot get clock\n");
+		return -ENOENT;
+	}
+	clk_prepare_enable(i2c->clk);
+
+	i2c->irq = platform_get_irq(pdev, 0);
+	if (i2c->irq <= 0) {
+		dev_err(&pdev->dev, "cannot find HS-I2C IRQ\n");
+		ret = -EINVAL;
+		goto err_clk;
+	}
+
+	strlcpy(i2c->adap.name, "hix5hd2-i2c", sizeof(i2c->adap.name));
+	i2c->dev = &pdev->dev;
+	i2c->adap.owner   = THIS_MODULE;
+	i2c->adap.algo	  = &hix5hd2_i2c_algorithm;
+	i2c->adap.retries = 3;
+	i2c->adap.dev.of_node = np;
+	i2c->adap.algo_data = i2c;
+	i2c->adap.dev.parent = &pdev->dev;
+	i2c_set_adapdata(&i2c->adap, i2c);
+	platform_set_drvdata(pdev, i2c);
+	spin_lock_init(&i2c->lock);
+	init_completion(&i2c->msg_complete);
+
+	hix5hd2_i2c_init(i2c);
+
+	ret = devm_request_irq(&pdev->dev, i2c->irq, hix5hd2_i2c_irq,
+			       IRQF_NO_SUSPEND | IRQF_ONESHOT,
+			       dev_name(&pdev->dev), i2c);
+	if (ret != 0) {
+		dev_err(&pdev->dev, "cannot request HS-I2C IRQ %d\n", i2c->irq);
+		goto err_clk;
+	}
+
+	ret = i2c_add_adapter(&i2c->adap);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "failed to add bus to i2c core\n");
+		goto err_clk;
+	}
+
+	pm_suspend_ignore_children(&pdev->dev, true);
+	pm_runtime_set_autosuspend_delay(i2c->dev, MSEC_PER_SEC);
+	pm_runtime_use_autosuspend(i2c->dev);
+	pm_runtime_set_active(i2c->dev);
+	pm_runtime_enable(i2c->dev);
+
+	return ret;
+
+err_clk:
+	clk_disable_unprepare(i2c->clk);
+	return ret;
+}
+
+static int hix5hd2_i2c_remove(struct platform_device *pdev)
+{
+	struct hix5hd2_i2c *i2c = platform_get_drvdata(pdev);
+
+	i2c_del_adapter(&i2c->adap);
+	pm_runtime_disable(i2c->dev);
+	pm_runtime_set_suspended(i2c->dev);
+
+	return 0;
+}
+
+
+#ifdef CONFIG_PM
+static int hix5hd2_i2c_runtime_suspend(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct hix5hd2_i2c *i2c = platform_get_drvdata(pdev);
+
+	clk_disable_unprepare(i2c->clk);
+
+	return 0;
+}
+
+static int hix5hd2_i2c_runtime_resume(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct hix5hd2_i2c *i2c = platform_get_drvdata(pdev);
+
+	clk_prepare_enable(i2c->clk);
+	hix5hd2_i2c_init(i2c);
+
+	return 0;
+}
+#endif
+
+static const struct dev_pm_ops hix5hd2_i2c_pm_ops = {
+	SET_PM_RUNTIME_PM_OPS(hix5hd2_i2c_runtime_suspend,
+			      hix5hd2_i2c_runtime_resume,
+			      NULL)
+};
+
+static const struct of_device_id hix5hd2_i2c_match[] = {
+	{ .compatible = "hisilicon,hix5hd2-i2c" },
+	{},
+};
+MODULE_DEVICE_TABLE(of, hix5hd2_i2c_match);
+
+static struct platform_driver hix5hd2_i2c_driver = {
+	.probe		= hix5hd2_i2c_probe,
+	.remove		= hix5hd2_i2c_remove,
+	.driver		= {
+		.owner	= THIS_MODULE,
+		.name	= "hix5hd2-i2c",
+		.pm	= &hix5hd2_i2c_pm_ops,
+		.of_match_table = hix5hd2_i2c_match,
+	},
+};
+
+module_platform_driver(hix5hd2_i2c_driver);
+
+MODULE_DESCRIPTION("Hix5hd2 I2C Bus driver");
+MODULE_AUTHOR("Wei Yan <sledge.yanwei@xxxxxxxxxx>");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:i2c-hix5hd2");
-- 
1.7.9.5

--
To unsubscribe from this list: send the line "unsubscribe linux-i2c" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux GPIO]     [Linux SPI]     [Linux Hardward Monitoring]     [LM Sensors]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux