On Thu, Jul 17, 2014 at 07:27:20PM +0200, Wolfram Sang wrote: > On Sun, Jul 13, 2014 at 05:17:17PM +0200, Jean Delvare wrote: > > I2C block transfers can have a size up to 32 bytes. If starting close > > Shouldn't that be "256 bytes"? 32 is SMBUS transfer size? Otherwise I > don't understand the patch. > If I understand correctly, this is still an SMBus command, which is limited to 32 bytes. Maybe the description should read "SMBus I2C block transfers ...". Guenter > > to the end of the address space, there may not be enough room to write > > that many bytes (on I2C block writes) or not enough bytes to be read > > (on I2C block reads.) In that case, we must shorten the transfer so > > that it does not exceed the address space. > > > > Signed-off-by: Jean Delvare <jdelvare@xxxxxxx> > > Cc: Guenter Roeck <linux@xxxxxxxxxxxx> > > Cc: Wolfram Sang <wsa@xxxxxxxxxxxxx> > > --- > > drivers/i2c/i2c-stub.c | 2 ++ > > 1 file changed, 2 insertions(+) > > > > --- linux-3.16-rc4.orig/drivers/i2c/i2c-stub.c 2014-07-12 11:56:30.933096483 +0200 > > +++ linux-3.16-rc4/drivers/i2c/i2c-stub.c 2014-07-13 17:01:02.891235856 +0200 > > @@ -220,6 +220,8 @@ static s32 stub_xfer(struct i2c_adapter > > * We ignore banks here, because banked chips don't use I2C > > * block transfers > > */ > > + if (data->block[0] > 256 - command) /* Avoid overrun */ > > + data->block[0] = 256 - command; > > len = data->block[0]; > > if (read_write == I2C_SMBUS_WRITE) { > > for (i = 0; i < len; i++) { > > > > > > -- > > Jean Delvare > > SUSE L3 Support -- To unsubscribe from this list: send the line "unsubscribe linux-i2c" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html