Hi Doug,
On 25.06.2014 01:56, Doug Anderson wrote:
> From: Vincent Palatin <vpalatin@xxxxxxxxxxxx>
>
> When the wake-up is triggered by the PMIC RTC, the RTC driver is trying
> to read the PMIC interrupt status over I2C and fails because the I2C
> controller is not resumed yet.
> Let's resume the I2C controller earlier in the _noirq phase
> (as other hardwares are doing), so we can properly get the wake-up
> condition.
>
> Signed-off-by: Vincent Palatin <vpalatin@xxxxxxxxxxxx>
> Signed-off-by: Doug Anderson <dianders@xxxxxxxxxxxx>
> ---
> Changes in v2:
> - Added missing freeze/thaw/poweroff/restore
>
> drivers/i2c/busses/i2c-s3c2410.c | 8 ++++++--
> 1 file changed, 6 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/i2c/busses/i2c-s3c2410.c b/drivers/i2c/busses/i2c-s3c2410.c
> index e828a1d..ecb389c 100644
> --- a/drivers/i2c/busses/i2c-s3c2410.c
> +++ b/drivers/i2c/busses/i2c-s3c2410.c
> @@ -1267,7 +1267,7 @@ static int s3c24xx_i2c_suspend_noirq(struct device *dev)
> return 0;
> }
>
> -static int s3c24xx_i2c_resume(struct device *dev)
> +static int s3c24xx_i2c_resume_noirq(struct device *dev)
> {
> struct platform_device *pdev = to_platform_device(dev);
> struct s3c24xx_i2c *i2c = platform_get_drvdata(pdev);
> @@ -1285,7 +1285,11 @@ static int s3c24xx_i2c_resume(struct device *dev)
> static const struct dev_pm_ops s3c24xx_i2c_dev_pm_ops = {
> #ifdef CONFIG_PM_SLEEP
> .suspend_noirq = s3c24xx_i2c_suspend_noirq,
> - .resume = s3c24xx_i2c_resume,
> + .resume_noirq = s3c24xx_i2c_resume_noirq,
> + .freeze_noirq = s3c24xx_i2c_suspend_noirq,
> + .thaw_noirq = s3c24xx_i2c_resume_noirq,
> + .poweroff_noirq = s3c24xx_i2c_suspend_noirq,
> + .restore_noirq = s3c24xx_i2c_resume_noirq,
> #endif
> };
Also fixes certain issues on Exynos4-based boards.
Acked-by: Tomasz Figa <t.figa@xxxxxxxxxxx>
--
Best regards,
Tomasz
--
To unsubscribe from this list: send the line "unsubscribe linux-i2c" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
