Hello, Sorry for the noise, I forgot to add the linux-i2c ML in Cc. This series adds support for the P2WI block used by some Allwinner boards to interface with the AXP221 PMIC. Best Regards, Boris Changes since v3: - update the DT bindings doc - fix a comment that was no longer true Changes since v2: - drop the initialization (switch from I2C to P2WI mode) part - print devm_ioremap_resource err code Changes since v1: - implement P2WI initilization - implement P2WI bus frequency configuration - implement address consistency check - fix devm_request_and_ioremap return check - rework the macro definitions - fix typos [1] http://www.spinics.net/lists/linux-i2c/msg15066.html [2] http://comments.gmane.org/gmane.comp.hardware.netbook.arm.sunxi/8947 Boris BREZILLON (2): i2c: sunxi: add P2WI DT bindings documentation i2c: sunxi: add P2WI (Push/Pull 2 Wire Interface) controller support .../devicetree/bindings/i2c/i2c-sunxi-p2wi.txt | 41 +++ drivers/i2c/busses/Kconfig | 12 + drivers/i2c/busses/Makefile | 1 + drivers/i2c/busses/i2c-sun6i-p2wi.c | 349 +++++++++++++++++++++ 4 files changed, 403 insertions(+) create mode 100644 Documentation/devicetree/bindings/i2c/i2c-sunxi-p2wi.txt create mode 100644 drivers/i2c/busses/i2c-sun6i-p2wi.c -- 1.8.3.2 -- To unsubscribe from this list: send the line "unsubscribe linux-i2c" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
