Intel Haswell has the same I2C host controller than Baytrail and it can
also be enumerated as a PCI device. Add the PCI IDs to the driver list.
Signed-off-by: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
---
drivers/i2c/busses/i2c-designware-pcidrv.c | 22 ++++++++++++++++++++++
1 file changed, 22 insertions(+)
diff --git a/drivers/i2c/busses/i2c-designware-pcidrv.c b/drivers/i2c/busses/i2c-designware-pcidrv.c
index 85056c22d21e..3356f7ab9f79 100644
--- a/drivers/i2c/busses/i2c-designware-pcidrv.c
+++ b/drivers/i2c/busses/i2c-designware-pcidrv.c
@@ -56,6 +56,7 @@ enum dw_pci_ctl_id_t {
medfield_5,
baytrail,
+ haswell,
};
struct dw_scl_sda_cfg {
@@ -95,6 +96,15 @@ static struct dw_scl_sda_cfg byt_config = {
.sda_hold = 0x6,
};
+/* Haswell HCNT/LCNT/SDA hold time */
+static struct dw_scl_sda_cfg hsw_config = {
+ .ss_hcnt = 0x01b0,
+ .fs_hcnt = 0x48,
+ .ss_lcnt = 0x01fb,
+ .fs_lcnt = 0xa0,
+ .sda_hold = 0x9,
+};
+
static struct dw_pci_controller dw_pci_controllers[] = {
[moorestown_0] = {
.bus_num = 0,
@@ -168,6 +178,15 @@ static struct dw_pci_controller dw_pci_controllers[] = {
.functionality = I2C_FUNC_10BIT_ADDR,
.scl_sda_cfg = &byt_config,
},
+ [haswell] = {
+ .bus_num = -1,
+ .bus_cfg = INTEL_MID_STD_CFG | DW_IC_CON_SPEED_FAST,
+ .tx_fifo_depth = 32,
+ .rx_fifo_depth = 32,
+ .clk_khz = 100000,
+ .functionality = I2C_FUNC_10BIT_ADDR,
+ .scl_sda_cfg = &hsw_config,
+ },
};
static struct i2c_algorithm i2c_dw_algo = {
.master_xfer = i2c_dw_xfer,
@@ -328,6 +347,9 @@ static const struct pci_device_id i2_designware_pci_ids[] = {
{ PCI_VDEVICE(INTEL, 0x0F45), baytrail },
{ PCI_VDEVICE(INTEL, 0x0F46), baytrail },
{ PCI_VDEVICE(INTEL, 0x0F47), baytrail },
+ /* Haswell */
+ { PCI_VDEVICE(INTEL, 0x9c61), haswell },
+ { PCI_VDEVICE(INTEL, 0x9c62), haswell },
{ 0,}
};
MODULE_DEVICE_TABLE(pci, i2_designware_pci_ids);
--
2.0.0.rc2
--
To unsubscribe from this list: send the line "unsubscribe linux-i2c" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
