The i2c-mux driver uses the chan_id parameter provided
in i2c_add_mux_adapter as a parameter to the select
and deselect callbacks while the i2c-mux-gpio driver
uses the chan_id as an index in the mux->data.values
array.
A simple example of where this doesn't work is when we
have a device tree like this:
i2cmux {
i2c@1 {
reg = <1>;
...
};
i2c@0 {
reg = <0>;
...
};
};
The mux->data.values array will be { 1, 0 }, but when
the i2-mux driver will try to select channel 0, the
i2c-mux-gpio driver will actually use values[0], hence 1
as the gpio selection value.
Signed-off-by: Ionut Nicu <ioan.nicu.ext@xxxxxxx>
---
drivers/i2c/muxes/i2c-mux-gpio.c | 4 ++--
1 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/i2c/muxes/i2c-mux-gpio.c b/drivers/i2c/muxes/i2c-mux-gpio.c
index b5f17ef..3505d0e 100644
--- a/drivers/i2c/muxes/i2c-mux-gpio.c
+++ b/drivers/i2c/muxes/i2c-mux-gpio.c
@@ -43,7 +43,7 @@ static int i2c_mux_gpio_select(struct i2c_adapter *adap, void *data, u32 chan)
{
struct gpiomux *mux = data;
- i2c_mux_gpio_set(mux, mux->data.values[chan]);
+ i2c_mux_gpio_set(mux, chan);
return 0;
}
@@ -233,7 +233,7 @@ static int i2c_mux_gpio_probe(struct platform_device *pdev)
unsigned int class = mux->data.classes ? mux->data.classes[i] : 0;
mux->adap[i] = i2c_add_mux_adapter(parent, &pdev->dev, mux, nr,
- i, class,
+ mux->data.values[i], class,
i2c_mux_gpio_select, deselect);
if (!mux->adap[i]) {
ret = -ENODEV;
--
1.7.1
--
To unsubscribe from this list: send the line "unsubscribe linux-i2c" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
