Re: [PATCH] i2c: mv64xxx: Fix transfer error code

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, Jun 20, 2013 at 09:23:37PM +0200, Wolfram Sang wrote:
> On Wed, Jun 19, 2013 at 02:53:52PM -0700, Guenter Roeck wrote:
> > The driver returns -ENODEV as error code if it did not get an ACK
> > from the device. Per Documentation/i2c/fault-codes, it should
> > return -ENXIO.
> > 
> > Signed-off-by: Guenter Roeck <linux@xxxxxxxxxxxx>
> 
> Thanks, have you checked the other error codes as well while you were
> there?
> 
Other error codes are ok as far as I can see.

Guenter

> > ---
> >  drivers/i2c/busses/i2c-mv64xxx.c |    2 +-
> >  1 file changed, 1 insertion(+), 1 deletion(-)
> > 
> > diff --git a/drivers/i2c/busses/i2c-mv64xxx.c b/drivers/i2c/busses/i2c-mv64xxx.c
> > index 1a3abd6..6972032 100644
> > --- a/drivers/i2c/busses/i2c-mv64xxx.c
> > +++ b/drivers/i2c/busses/i2c-mv64xxx.c
> > @@ -227,7 +227,7 @@ mv64xxx_i2c_fsm(struct mv64xxx_i2c_data *drv_data, u32 status)
> >  		/* Doesn't seem to be a device at other end */
> >  		drv_data->action = MV64XXX_I2C_ACTION_SEND_STOP;
> >  		drv_data->state = MV64XXX_I2C_STATE_IDLE;
> > -		drv_data->rc = -ENODEV;
> > +		drv_data->rc = -ENXIO;
> >  		break;
> >  
> >  	default:
> > -- 
> > 1.7.9.7
> > 


--
To unsubscribe from this list: send the line "unsubscribe linux-i2c" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux GPIO]     [Linux SPI]     [Linux Hardward Monitoring]     [LM Sensors]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux