Hi Maxime,
On Wednesday 12 of June 2013 10:07:13 Maxime Ripard wrote:
> Add the compatible string for the Allwinner A10 i2c controller and the
> associated register layout.
>
> Signed-off-by: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
> ---
> drivers/i2c/busses/Kconfig | 3 ++-
> drivers/i2c/busses/i2c-mv64xxx.c | 1 +
> include/linux/mv643xx_i2c.h | 10 ++++++++++
> 3 files changed, 13 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
> index 631736e..5dc4148 100644
> --- a/drivers/i2c/busses/Kconfig
> +++ b/drivers/i2c/busses/Kconfig
> @@ -507,10 +507,11 @@ config I2C_MPC
>
> config I2C_MV64XXX
> tristate "Marvell mv64xxx I2C Controller"
> - depends on (MV64X60 || PLAT_ORION)
> + depends on (MV64X60 || PLAT_ORION || ARCH_SUNXI)
> help
> If you say yes to this option, support will be included for the
> built-in I2C interface on the Marvell 64xxx line of host
bridges.
> + This driver is also used for Allwinner SoCs I2C controllers.
>
> This driver can also be built as a module. If so, the module
> will be called i2c-mv64xxx.
> diff --git a/drivers/i2c/busses/i2c-mv64xxx.c
> b/drivers/i2c/busses/i2c-mv64xxx.c index f9e076e..febf5ba 100644
> --- a/drivers/i2c/busses/i2c-mv64xxx.c
> +++ b/drivers/i2c/busses/i2c-mv64xxx.c
> @@ -490,6 +490,7 @@ static const struct i2c_algorithm mv64xxx_i2c_algo =
> { */
> #ifdef CONFIG_OF
> static const struct of_device_id mv64xxx_i2c_of_match_table[] = {
> + { .compatible = "allwinner,sun4i-i2c", .data =
> &mv64xxx_i2c_regs_sun4i}, { .compatible = "marvell,mv64xxx-i2c", .data
> = &mv64xxx_i2c_regs_mv64xxx}, {}
Ah, OK, here you use compatible matching to get variant-specific data,
fine. Still I think the same method (based on platform device name) should
be used for non-DT variant.
> };
> diff --git a/include/linux/mv643xx_i2c.h b/include/linux/mv643xx_i2c.h
> index 9304c94..737108e 100644
> --- a/include/linux/mv643xx_i2c.h
> +++ b/include/linux/mv643xx_i2c.h
> @@ -32,6 +32,16 @@ struct mv64xxx_i2c_regs mv64xxx_i2c_regs_mv64xxx = {
> .soft_reset = 0x1c,
> };
>
> +struct mv64xxx_i2c_regs mv64xxx_i2c_regs_sun4i = {
> + .addr = 0x00,
> + .ext_addr = 0x04,
> + .data = 0x08,
> + .control = 0x0c,
> + .status = 0x10,
> + .clock = 0x14,
> + .soft_reset = 0x18,
> +};
> +
Hmm, header doesn't look like a correct place for a structure definition,
especially when the structure isn't even static.
Best regards,
Tomasz
> /* i2c Platform Device, Driver Data */
> struct mv64xxx_i2c_pdata {
> u32 freq_m;
--
To unsubscribe from this list: send the line "unsubscribe linux-i2c" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
