On 06/04/2013 09:29 PM, Kevin Hilman wrote:
Grygorii Strashko <grygorii.strashko@xxxxxx> writes:
Hi Kevin,
On 06/03/2013 11:59 PM, Kevin Hilman wrote:
Grygorii Strashko <grygorii.strashko@xxxxxx> writes:
The OMAP I2C driver has a relation to pinctrl-single driver. As result,
its probe will be deferred during system boot until late init time,
because the pinctrl-single is initizalized as moudle/device init time.
This, in turn, will delay initialization of all I2C devices (like mfd,
I2C regulators and etc.) and cause boot delay (more over, it can broken
initialization of drivers which are not ready to use deferred probe
mechanism yet, for example DSS).
There are no sense to keep OMAP I2C initialization on subsys init layer
any more, hence shift it to module/device layer where the i2c <-->
pinctrl-single dependency is resolved in drivers/Makefile now.
Cc: Wolfram Sang <wsa@xxxxxxxxxxxxx>
Cc: "Ben Dooks (embedded platforms)" <ben-linux@xxxxxxxxx>
Cc: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
Cc: linux-omap@xxxxxxxxxxxxxxx
Cc: linux-i2c@xxxxxxxxxxxxxxx
Cc: linux-kernel@xxxxxxxxxxxxxxx
Signed-off-by: Grygorii Strashko <grygorii.strashko@xxxxxx>
Testing this patch with PATCH 1/2, the twl_rtc driver fails to correctly
initialize on OMAP3:
twl_rtc rtc.22: hctosys: invalid date/time
instead of the expected result:
twl_rtc rtc.22: setting system clock to 2000-01-01 00:00:00 UTC (946684800)
so something is still not right for the init sequence.
Kevin
I think, the root cause of the problem isn't this patch - it's just
yet another side effect
of using deferred probes :). I've taken a look on twl-rtc code and
found possible error place
static int __init twl_rtc_init(void)
{
if (twl_class_is_4030()) <------ here,
rtc_reg_map = (u8 *) twl4030_rtc_reg_map;
else
rtc_reg_map = (u8 *) twl6030_rtc_reg_map;
return platform_driver_register(&twl4030rtc_driver);
}
In drivers/Makefile:
obj-$(CONFIG_RTC_LIB) += rtc/ <------ RTC is placed before I2C
obj-y += i2c/ media/ <----- and only here I2C bus
instantiates TWL-core device
and configures twl_priv->twl_id
Thats why it's working on my OMAP4/twl6030 board. Could you check if
below fix will work on OMAP3:
Yes, your fix works. Thanks for digging into it.
Care to send a proper patch? Please be sure to send to Andrew Morton
also, since he'll be the one to queue the RTC patch.
Hi Kevin,
The similar patch already exists:
https://patchwork.kernel.org/patch/2448251/ - [v2,1/2] RTC: rtc-twl: Fix
rtc_reg_map initialization
from Peter Ujfalusi
-grygorii
diff --git a/drivers/rtc/rtc-twl.c b/drivers/rtc/rtc-twl.c
index 8751a52..aaa5015 100644
--- a/drivers/rtc/rtc-twl.c
+++ b/drivers/rtc/rtc-twl.c
@@ -469,6 +469,11 @@ static int twl_rtc_probe(struct platform_device *pdev)
if (irq <= 0)
goto out1;
+ if (twl_class_is_4030())
+ rtc_reg_map = (u8 *) twl4030_rtc_reg_map;
+ else
+ rtc_reg_map = (u8 *) twl6030_rtc_reg_map;
+
ret = twl_rtc_read_u8(&rd_reg, REG_RTC_STATUS_REG);
if (ret < 0)
goto out1;
@@ -610,11 +615,6 @@ static struct platform_driver twl4030rtc_driver = {
static int __init twl_rtc_init(void)
{
- if (twl_class_is_4030())
- rtc_reg_map = (u8 *) twl4030_rtc_reg_map;
- else
- rtc_reg_map = (u8 *) twl6030_rtc_reg_map;
-
return platform_driver_register(&twl4030rtc_driver);
}
module_init(twl_rtc_init);
Unfortunately, I have no OMAP3 HW and can't check it.
I suggest you find a Beagle or Gumstix/Overo type board someplace.
There is an abundance of cheap OMAP3 hardware available.
Kevin
--
To unsubscribe from this list: send the line "unsubscribe linux-i2c" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
