Re: [PATCH v4] i2c: exynos5: add High Speed I2C controller driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, Feb 01, 2013 at 09:24:44PM +0530, Naveen Krishna Chatradhi wrote:
> Adds support for High Speed I2C driver found in Exynos5 and later
> SoCs from Samsung. This driver currently supports Auto mode.
> 
> Driver only supports Device Tree method.
> Note: Added debugfs support for registers view, not tested.
> 
> Signed-off-by: Taekgyun Ko <taeggyun.ko@xxxxxxxxxxx>
> Signed-off-by: Naveen Krishna Chatradhi <ch.naveen@xxxxxxxxxxx>
> ---
> Help please,
> 
> Usual reads and writes are happening. But, when i try doing
> i2cdetect -y 0 0x10 0x59; It throws me continous interrupts at 0x1a
> i2cdetect -y 0 0x50 0x64; It throws me continous interrupts at 0x63
> 
> There are eeproms from 0x50 till 0x58
> wm8994 codec at 0x1a
> 
> Kindly, can anyone explain this behaviour.

You select I2C_FUNC_SMBUS_EMUL, but make sure your hardware really
supports I2C_FUNC_SMBUS_QUICK. That would be my first guess. Also, which
eeprom do you have? Check its datasheet, some in deed use 8 addresses.

Regards,

   Wolfram

-- 
Pengutronix e.K.                           | Wolfram Sang                |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |

Attachment: signature.asc
Description: Digital signature


[Index of Archives]     [Linux GPIO]     [Linux SPI]     [Linux Hardward Monitoring]     [LM Sensors]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux