2013/1/23 Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>:
> On Wed, Jan 23, 2013 at 02:32:44PM +0800, Liu Ying wrote:
>> This patch adds at24c512b i2c device to the device tree
>> along with the necessary i2c device node and pinctrl
>> settings for i2c bus.
>> The eeprom chip is populated on the accessory board of
>> the imx51-babbage board.
>
> Given that it's optional should the binding be here anyway? I don't have
> this accessory board and this may conflict with the boards other people
> have connected on this port.
>
> Sascha
Understand your concern. Is there any way to handle this? How can we support
the present accessory board correctly? More generally, not all main boards can
figure out what kind of accessory board is attached to them, at least, some main
boards can only figure out limited number of accessory boards by using some ways
of board ID check.
>
>>
>> Signed-off-by: Liu Ying <Ying.Liu@xxxxxxxxxxxxx>
>> ---
>> arch/arm/boot/dts/imx51-babbage.dts | 12 ++++++++++++
>> arch/arm/boot/dts/imx51.dtsi | 9 +++++++++
>> 2 files changed, 21 insertions(+), 0 deletions(-)
>>
>> diff --git a/arch/arm/boot/dts/imx51-babbage.dts b/arch/arm/boot/dts/imx51-babbage.dts
>> index 567e7ee..4f0fc75 100644
>> --- a/arch/arm/boot/dts/imx51-babbage.dts
>> +++ b/arch/arm/boot/dts/imx51-babbage.dts
>> @@ -241,6 +241,18 @@
>> };
>> };
>>
>> + i2c@83fc8000 { /* I2C1 */
>> + pinctrl-names = "default";
>> + pinctrl-0 = <&pinctrl_i2c1_1>;
>> + status = "okay";
>> +
>> + at24@50 {
>> + compatible = "at24,24c512b";
>> + pagesize = <128>;
>> + reg = <0x50>;
>> + };
>> + };
>> +
>> audmux@83fd0000 {
>> pinctrl-names = "default";
>> pinctrl-0 = <&pinctrl_audmux_1>;
>> diff --git a/arch/arm/boot/dts/imx51.dtsi b/arch/arm/boot/dts/imx51.dtsi
>> index 1f5d45e..6495c69 100644
>> --- a/arch/arm/boot/dts/imx51.dtsi
>> +++ b/arch/arm/boot/dts/imx51.dtsi
>> @@ -311,6 +311,15 @@
>> };
>> };
>>
>> + i2c1 {
>> + pinctrl_i2c1_1: i2c1grp-1 {
>> + fsl,pins = <
>> + 4 0x400001ed /* MX51_PAD_EIM_D16__I2C1_SDA */
>> + 23 0x400001ed /* MX51_PAD_EIM_D19__I2C1_SCL */
>> + >;
>> + };
>> + };
>> +
>> i2c2 {
>> pinctrl_i2c2_1: i2c2grp-1 {
>> fsl,pins = <
>> --
>> 1.7.1
>>
>>
>>
>
> --
> Pengutronix e.K. | |
> Industrial Linux Solutions | http://www.pengutronix.de/ |
> Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
> Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
--
Best Regards,
Liu Ying
--
To unsubscribe from this list: send the line "unsubscribe linux-i2c" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
