Hi all, This series adds support for the Intel Lynxpoint Low Power Subsystem I2C controllers. They are compatible with the DesignWare I2C controller. Patches [1/4] and [2/4] are fixes that are necessary to get the driver working on Lynxpoint. Patch [3/4] brings minimal runtime PM support for the designware platform driver. This is useful if the PM subsystem/domain implements runtime PM, like in case of ACPI. Patch [4/4] finally implements ACPI enumeration support for the designware platform driver and adds Lynxpoint ACPI IDs. Please review. Mika Westerberg (4): i2c-designware: add missing MODULE_LICENSE i2c-designware: always set the STOP bit after last byte i2c-designware: add minimal support for runtime PM i2c-designware: add support for Intel Lynxpoint drivers/i2c/busses/i2c-designware-core.c | 20 ++++++++- drivers/i2c/busses/i2c-designware-platdrv.c | 59 +++++++++++++++++++++++++-- 2 files changed, 74 insertions(+), 5 deletions(-) -- 1.7.10.4 -- To unsubscribe from this list: send the line "unsubscribe linux-i2c" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
