Re: [PATCH v2] i2c-i801: Enable interrupts for all post-ICH5 chips

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Daniel,

On Thu, 13 Dec 2012 09:53:10 +0800, Daniel Kurtz wrote:
> Hi Jean,
> 
> On Wed, Nov 7, 2012 at 3:38 AM, Jean Delvare <khali@xxxxxxxxxxxx> wrote:
> > I did not receive a single bug report after interrupt support was
> > added for a limited number of chips. So I'd say the code is good and
> > should be enabled for all supported chips, that is: ICH5 and later.
> >
> > Signed-off-by: Jean Delvare <khali@xxxxxxxxxxxx>
> > Cc: Daniel Kurtz <djkurtz@xxxxxxxxxxxx>
> > ---
> > I was able to test on Patsburg IDF channels and although I couldn't
> > test all transaction types, interrupts seem to work the same as on the
> > main SMBus channel so let's enable interrupts there too.
> 
> 
> I can confirm that the IRQ works on PantherPoint at least, if enabled
> (by this patch, for example).  However, I don't know anything about
> IDF, so I can't help there.
> Here's an R-B, if you need it:
> 
> Reviewed-by: Daniel Kurtz <djkurtz@xxxxxxxxxxxx>

Thanks for the testing and review.

> Are you targeting this for 3.8?

Yes I am. I'll send the remaining patches in my i2c queue to Linus
later today.

-- 
Jean Delvare
--
To unsubscribe from this list: send the line "unsubscribe linux-i2c" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux GPIO]     [Linux SPI]     [Linux Hardward Monitoring]     [LM Sensors]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux