Does the followiing - Make the revision a 32- bit consisting of rev_lo amd rev_hi each of 16 bits. - Also use the revision register for the erratum i207. - Refactor the i2c_omap_init code. Also more cleanup is possible will check on that subsequently. Tested on OMAP4430sdp ,4460 ,omap3630 ,3430 and omap2430. For omap2 testing the below patch was used [PATCH] ARM: vfp: fix save and restore when running on pre-VFPv3 and CONFIG_VFPv3 set Also for using the pm testing below patches are used. arm: sched: stop sched_clock() during suspend ARM: OMAP: hwmod: wait for sysreset complete after enabling hwmod Also available through git://gitorious.org/linus-tree/linus-tree.git i2c_omap/for_3.8 Shubhrajyoti D (7): i2c: omap: Fix the revision register read i2c: omap: use revision check for OMAP_I2C_FLAG_APPLY_ERRATA_I207 i2c: omap: remove the dtrev ARM: i2c: omap: Remove the i207 errata flag i2c: omap: re-factor omap_i2c_init function i2c: omap: make reset a seperate function i2c: omap: Restore i2c context always arch/arm/mach-omap2/omap_hwmod_2430_data.c | 3 +- arch/arm/mach-omap2/omap_hwmod_3xxx_data.c | 9 +- drivers/i2c/busses/i2c-omap.c | 166 +++++++++++++++++----------- include/linux/i2c-omap.h | 1 - 4 files changed, 104 insertions(+), 75 deletions(-) -- 1.7.5.4 -- To unsubscribe from this list: send the line "unsubscribe linux-i2c" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
