Hi,
On Thu, Oct 25, 2012 at 06:23:57PM +0530, Santosh Shilimkar wrote:
> On Thursday 25 October 2012 05:55 PM, Felipe Balbi wrote:
> >on OMAP4+ we want to read IRQSTATUS_RAW register,
> >instead of IRQSTATUS. The reason being that IRQSTATUS
> >will only contain the bits which were enabled on
> >IRQENABLE_SET and that will break when we need to
> >poll for a certain bit which wasn't enabled as an
> >IRQ source.
> >
> >One such case is after we finish converting to
> >deferred stop bit, we will have to poll for ARDY
> >bit before returning control for the client driver
> >in order to prevent us from trying to start a
> >transfer on a bus which is already busy.
> >
> >Note, however, that omap-i2c.c needs a big rework
> >on register definition and register access. Such
> >work will be done in a separate series of patches.
> >
> >Cc: Benoit Cousson <b-cousson@xxxxxx>
> >Signed-off-by: Felipe Balbi <balbi@xxxxxx>
> >---
> > drivers/i2c/busses/i2c-omap.c | 12 +++++++++++-
> > 1 file changed, 11 insertions(+), 1 deletion(-)
> >
> >diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c
> >index b004126..20f9ad6 100644
> >--- a/drivers/i2c/busses/i2c-omap.c
> >+++ b/drivers/i2c/busses/i2c-omap.c
> >@@ -271,8 +271,18 @@ static inline void omap_i2c_write_reg(struct omap_i2c_dev *i2c_dev,
> >
> > static inline u16 omap_i2c_read_reg(struct omap_i2c_dev *i2c_dev, int reg)
> > {
> >- return __raw_readw(i2c_dev->base +
> >+ /* if we are OMAP_I2C_IP_VERSION_2, we need to read from
> >+ * IRQSTATUS_RAW, but write to IRQSTATUS
> >+ */
> >+ if ((i2c_dev->dtrev == OMAP_I2C_IP_VERSION_2) &&
> >+ (reg == OMAP_I2C_STAT_REG)) {
> Doing this check on every I2C register read seems to
> expensive to me. Can you not sort this in init with some offset
> which can be 0 or non zero ? Sorry in case this is already dicussed.
could be. I didn't go that route because I'm planning a complete rewrite
of all register accesses. The way it's done today is completely broken
and already expensive (with reg_shift and different map tables and so
on).
If it's really a big of a deal, I can try to find another way, maybe
just adding omap_i2c_read_stat() and limit the version check just to
I2C_STAT reads would do it for now...
--
balbi
Attachment:
signature.asc
Description: Digital signature
