Hi,
On Mon, Oct 22, 2012 at 02:27:20PM +0200, Benoit Cousson wrote:
> Hi Felipe,
>
> On 10/22/2012 11:46 AM, Felipe Balbi wrote:
> > on OMAP4+ we want to read IRQSTATUS_RAW register,
> > instead of IRQSTATUS. The reason being that IRQSTATUS
> > will only contain the bits which were enabled on
> > IRQENABLE_SET and that will break when we need to
> > poll for a certain bit which wasn't enabled as an
> > IRQ source.
> >
> > One such case is after we finish converting to
> > deferred stop bit, we will have to poll for ARDY
> > bit before returning control for the client driver
> > in order to prevent us from trying to start a
> > transfer on a bus which is already busy.
> >
> > Note, however, that omap-i2c.c needs a big rework
> > on register definition and register access. Such
> > work will be done in a separate series of patches.
>
> Do you need OMAP_I2C_IP_VERSION_3 for OMAP4?
>
> OMAP_I2C_IP_VERSION_2 was already introduced to detect OMAP3630 vs
> omap4430 because they were sharing the same IP version..
>
> /* I2C controller revisions present on specific hardware */
> #define OMAP_I2C_REV_ON_2430 0x36
> #define OMAP_I2C_REV_ON_3430_3530 0x3C
> #define OMAP_I2C_REV_ON_3630_4430 0x40
>
> So in theory you should not need an extra version.
are you sure that's how they're used ? Looking at the code where we
choose reg_map_ip_v1 and reg_map_ip_v2:
1120 if (dev->dtrev == OMAP_I2C_IP_VERSION_2)
1121 dev->regs = (u8 *)reg_map_ip_v2;
1122 else
1123 dev->regs = (u8 *)reg_map_ip_v1;
And looking at reg_map_ip_v1:
218 static const u8 reg_map_ip_v1[] = {
219 [OMAP_I2C_REV_REG] = 0x00,
220 [OMAP_I2C_IE_REG] = 0x01,
221 [OMAP_I2C_STAT_REG] = 0x02,
222 [OMAP_I2C_IV_REG] = 0x03,
223 [OMAP_I2C_WE_REG] = 0x03,
224 [OMAP_I2C_SYSS_REG] = 0x04,
225 [OMAP_I2C_BUF_REG] = 0x05,
226 [OMAP_I2C_CNT_REG] = 0x06,
227 [OMAP_I2C_DATA_REG] = 0x07,
228 [OMAP_I2C_SYSC_REG] = 0x08,
229 [OMAP_I2C_CON_REG] = 0x09,
230 [OMAP_I2C_OA_REG] = 0x0a,
231 [OMAP_I2C_SA_REG] = 0x0b,
232 [OMAP_I2C_PSC_REG] = 0x0c,
233 [OMAP_I2C_SCLL_REG] = 0x0d,
234 [OMAP_I2C_SCLH_REG] = 0x0e,
235 [OMAP_I2C_SYSTEST_REG] = 0x0f,
236 [OMAP_I2C_BUFSTAT_REG] = 0x10,
237 };
that's really not the register map on OMAP3. That only looks valid for
OMAP1.
-ECONFUSED
--
balbi
Attachment:
signature.asc
Description: Digital signature
