Print extra timing values for DDR memory modules as we do for DDR2
memory modules.
---
eeprom/decode-dimms | 47 ++++++++++++++++++++++++++++++++++++++++++++++-
1 file changed, 46 insertions(+), 1 deletion(-)
--- i2c-tools.orig/eeprom/decode-dimms 2012-10-20 13:28:11.000000000 +0200
+++ i2c-tools/eeprom/decode-dimms 2012-10-20 13:31:05.899876006 +0200
@@ -536,7 +536,12 @@ sub prints($) # print separator w/ given
# Helper functions
-sub tns($) # print a time in ns
+sub tns1($) # print a time in ns, with 1 decimal digit
+{
+ return sprintf("%.1f ns", $_[0]);
+}
+
+sub tns($) # print a time in ns, with 2 decimal digits
{
return sprintf("%3.2f ns", $_[0]);
}
@@ -944,8 +949,48 @@ sub decode_ddr_sdram($)
printl_cond(defined $cycle_time, "Minimum Cycle Time", $cycle_time);
printl_cond(defined $access_time, "Maximum Access Time", $access_time);
+ printl_cond($bytes->[43] & 0xfc,
+ "Maximum Cycle Time (tCK max)",
+ $bytes->[43] == 0xff ? "No minimum frequency" :
+ $bytes->[43] == 0x00 ? "" : # Can't happen, prevent div by 0
+ tns1($bytes->[43]/4)." (DDR".int(8000 / $bytes->[43]).")");
+
+
+# more timing information
+ prints("Timing Parameters");
+ printl_cond($bytes->[32] != 0xff,
+ "Address/Command Setup Time Before Clock",
+ tns(ddr2_sdram_atime($bytes->[32])));
+ printl_cond($bytes->[33] != 0xff,
+ "Address/Command Hold Time After Clock",
+ tns(ddr2_sdram_atime($bytes->[33])));
+ printl_cond($bytes->[34] != 0xff,
+ "Data Input Setup Time Before Clock",
+ tns(ddr2_sdram_atime($bytes->[34])));
+ printl_cond($bytes->[35] != 0xff,
+ "Data Input Hold Time After Clock",
+ tns(ddr2_sdram_atime($bytes->[35])));
+ printl("Minimum Row Precharge Delay (tRP)", tns($trp));
+ printl_cond($bytes->[28] & 0xfc,
+ "Minimum Row Active to Row Active Delay (tRRD)",
+ tns($bytes->[28]/4));
+ printl("Minimum RAS# to CAS# Delay (tRCD)", tns($trcd));
+ printl("Minimum RAS# Pulse Width (tRAS)", tns($tras));
+ printl_cond($bytes->[41] && $bytes->[41] != 0xff,
+ "Minimum Active to Active/AR Time (tRC)",
+ tns($bytes->[41]));
+ printl_cond($bytes->[42],
+ "Minimum AR to Active/AR Command Period (tRFC)",
+ tns($bytes->[42]));
+ printl_cond($bytes->[44],
+ "Maximum DQS to DQ Skew (tDQSQ)",
+ tns($bytes->[44]/100));
+ printl_cond(($bytes->[45] & 0xf0) && $bytes->[45] != 0xff,
+ "Maximum Read Data Hold Skew (tQHS)",
+ tns(ddr2_sdram_atime($bytes->[45])));
# module attributes
+ prints("Module Attributes");
if (($bytes->[47] & 0x03) == 0x01) { $temp = "1.125\" to 1.25\""; }
elsif (($bytes->[47] & 0x03) == 0x02) { $temp = "1.7\""; }
else { $temp = "Other"; }
--
Jean Delvare
--
To unsubscribe from this list: send the line "unsubscribe linux-i2c" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
