Re: [PATCH v3] ARM: OMAP: i2c: fix interrupt flood during resume

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, Oct 10, 2012 at 5:48 PM, Kalle Jokiniemi
<kalle.jokiniemi@xxxxxxxxxxxxxxx> wrote:
> The resume_noirq enables interrupts one-by-one starting from
> first one. Now if the wake up event for suspend came from i2c
> device, the i2c bus irq gets enabled before the threaded
> i2c device irq, causing a flood of i2c bus interrupts as the
> threaded irq that should clear the event is not enabled yet.
>
> Fixed the issue by adding suspend_noirq and resume_early
> functions that keep i2c bus interrupts disabled until
> resume_noirq has run completely.
>
> Issue was detected doing a wake up from autosleep with
> twl4030 power key on N9. Patch tested on N9.
>
> Signed-off-by: Kalle Jokiniemi <kalle.jokiniemi@xxxxxxxxxxxxxxx>

Thanks for rebasing however since you were actually interested in one
of the older
stable releases how about cc stable?
--
To unsubscribe from this list: send the line "unsubscribe linux-i2c" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux GPIO]     [Linux SPI]     [Linux Hardward Monitoring]     [LM Sensors]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux