+Grygorii (who's been working on various I2C related suspend/resume
issues also)
Hi Kalle,
Kalle Jokiniemi <kalle.jokiniemi@xxxxxxxxxxxxxxx> writes:
> The resume_noirq enables interrupts one-by-one starting from
> first one. Now if the wake up event for suspend came from i2c
> device, the i2c bus irq gets enabled before the threaded
> i2c device irq, causing a flood of i2c bus interrupts as the
> threaded irq that should clear the event is not enabled yet.
Ugh, another reason we need some sort of driver dependency tracking in the
driver model.
> Fixed the issue by adding suspend_late and resume_early
> functions that keep i2c bus interrupts disabled until
> resume_noirq has run completely.
Hmm, any reason we couldn't put the disable in the .suspend_noirq
callback? The reason being is that other drivers might use I2C in their
suspend or late_suspend callbacks. I'm not aware of any using I2C in
their late_suspend callbacks in mainline, but in theory I2C should work
all the way through the late callbacks.
I know it might look strange to have a disable_irq() in the noirq
callback, since IRQs are already disabled at that point, but a comment
stating that it's just there to balance the (re)enable in the
early_resume callback should be clear.
Some other minor comments below...
> Issue was detected doing a wake up from autosleep with
> twl4030 power key on N9. Patch tested on N9.
>
> Signed-off-by: Kalle Jokiniemi <kalle.jokiniemi@xxxxxxxxxxxxxxx>
> ---
> drivers/i2c/busses/i2c-omap.c | 37 +++++++++++++++++++++++++++++++++++++
> 1 files changed, 37 insertions(+), 0 deletions(-)
>
> diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c
> index 801df60..b77b0c2 100644
> --- a/drivers/i2c/busses/i2c-omap.c
> +++ b/drivers/i2c/busses/i2c-omap.c
> @@ -1158,6 +1158,35 @@ omap_i2c_remove(struct platform_device *pdev)
> return 0;
> }
>
> +#ifdef CONFIG_SUSPEND
This should be CONFIG_PM_SLEEP in order to cover hibernation also.
> +static int omap_i2c_suspend_late(struct device *dev)
> +{
> +
> + struct platform_device *pdev = to_platform_device(dev);
> + struct omap_i2c_dev *_dev = platform_get_drvdata(pdev);
> +
> + /*
> + * The noirq_resume enables the interrupts one by one,
> + * this causes a interrupt flood if the SW irq actually reading
> + * event from i2c device is enabled only after i2c bus irq, as the
> + * irq that should clear the event is still disabled. We have to
> + * disable the bus irq until all other irqs have been enabled.
> + */
This comment probably belongs in the resume handler.
> + disable_irq(_dev->irq);
> + return 0;
> +}
> +
> +static int omap_i2c_resume_early(struct device *dev)
> +{
> +
> + struct platform_device *pdev = to_platform_device(dev);
> + struct omap_i2c_dev *_dev = platform_get_drvdata(pdev);
> +
> + enable_irq(_dev->irq);
> +
> + return 0;
> +}
> +#endif
> #ifdef CONFIG_PM_RUNTIME
> static int omap_i2c_runtime_suspend(struct device *dev)
> {
> @@ -1178,10 +1207,18 @@ static int omap_i2c_runtime_resume(struct device *dev)
>
> return 0;
> }
> +#endif
>
> +#if defined(CONFIG_SUSPEND) || defined(CONFIG_PM_RUNTIME)
#ifdef CONFIG_PM will cover this
> static struct dev_pm_ops omap_i2c_pm_ops = {
> +#ifdef CONFIG_SUSPEND
again, CONFIG_PM_SLEEP here
> + .suspend_late = omap_i2c_suspend_late,
> + .resume_early = omap_i2c_resume_early,
> +#endif
> +#ifdef CONFIG_PM_RUNTIME
> .runtime_suspend = omap_i2c_runtime_suspend,
> .runtime_resume = omap_i2c_runtime_resume,
> +#endif
> };
> #define OMAP_I2C_PM_OPS (&omap_i2c_pm_ops)
> #else
Kevin
--
To unsubscribe from this list: send the line "unsubscribe linux-i2c" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
