On Thu, Sep 13, 2012 at 12:05:31PM +0200, Wolfram Sang wrote:
> On Wed, Sep 12, 2012 at 08:39:51PM -0700, Guenter Roeck wrote:
> > From: Thomas Kavanagh <tkavanagh@xxxxxxxxxxx>
> >
> > As implemented, the code always selects turbo mode for PCA9665, no matter which
> > clock frequency is configured. This is because it compares clock boundaries
> > against constants reflecting (boundary / 100), but uses the actual clock frequency
> > to compare against. To fix the problem, use a variable reflecting (clock / 100),
> > not the actual clock frequency, when comparing against (boundary / 100).
>
> Good point, however...
>
> >
> > Cc: Wolfram Sang <w.sang@xxxxxxxxxxxxxx>
> > Signed-off-by: Thomas Kavanagh <tkavanagh@xxxxxxxxxxx>
> > Signed-off-by: Guenter Roeck <groeck@xxxxxxxxxxx>
> > ---
> > drivers/i2c/algos/i2c-algo-pca.c | 6 +++---
> > 1 file changed, 3 insertions(+), 3 deletions(-)
> >
> > diff --git a/drivers/i2c/algos/i2c-algo-pca.c b/drivers/i2c/algos/i2c-algo-pca.c
> > index 07ccbef..572251b 100644
> > --- a/drivers/i2c/algos/i2c-algo-pca.c
> > +++ b/drivers/i2c/algos/i2c-algo-pca.c
> > @@ -477,17 +477,17 @@ static int pca_init(struct i2c_adapter *adap)
> > /* To avoid integer overflow, use clock/100 for calculations */
> > clock = pca_clock(pca_data) / 100;
> >
> > - if (pca_data->i2c_clock > 10000) {
> > + if (clock > 10000) {
>
> ... we should make the code more readable if we are at it.
> I'd suggest to drop the "/ 100" from above and move it below this
> if-block. This will allow for much more readable comparisons, e.g.
> "clock > 1000000" etc which is really the clock in Hz.
>
We can simply compare against the real frequency:
if (pca_data->i2c_clock > 1000000) {
which also makes the description a bit easier to understand.
> > mode = I2C_PCA_MODE_TURBO;
> > min_tlow = 14;
> > min_thi = 5;
> > raise_fall_time = 22; /* Raise 11e-8s, Fall 11e-8s */
> > - } else if (pca_data->i2c_clock > 4000) {
> > + } else if (clock > 4000) {
> > mode = I2C_PCA_MODE_FASTP;
> > min_tlow = 17;
> > min_thi = 9;
> > raise_fall_time = 22; /* Raise 11e-8s, Fall 11e-8s */
> > - } else if (pca_data->i2c_clock > 1000) {
> > + } else if (clock > 1000) {
> > mode = I2C_PCA_MODE_FAST;
> > min_tlow = 44;
> > min_thi = 20;
> > --
> > 1.7.9.7
> >
>
> --
> Pengutronix e.K. | Wolfram Sang |
> Industrial Linux Solutions | http://www.pengutronix.de/ |
--
To unsubscribe from this list: send the line "unsubscribe linux-i2c" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
