I'm new to Linux I2C community. So let me say "Hello!" here. We are trying to drive some sensors on Linux. The sensors are connected to the board as I2C slaves. I noticed the i2c_board_info can be used to register i2c slaves for the embedded platforms. I noticed there's also "address_list" member in the i2c_driver which can be used to detect the I2C slaves. The first question is: Which one shall I use to draft my sensor codes? If i2c_board_info is used to register platform i2c slaves, there is another issue for me: One of the sensors has 2 slave addresses. I noticed only one slave address can be declared in one i2c_board_info. The second question is: Shall I register the sensor's resource using 2 i2c_board_info? By doing this, shall I draft a single .c file containing 2 "i2c_driver" for them? Best regards/Lv Zheng -- To unsubscribe from this list: send the line "unsubscribe linux-i2c" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
