When booting using a device tree, the adapter number is dynamically assigned after the log message is sent. This patch modifies the log message to get a correct adapter id. Applies on 3.6-rc3. Tested on OMAP3 (Gumstix Overo). Signed-off-by: Florian Vaussard <florian.vaussard@xxxxxxx> --- drivers/i2c/busses/i2c-omap.c | 6 +++--- 1 files changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c index 5d19a49..136b4fe 100644 --- a/drivers/i2c/busses/i2c-omap.c +++ b/drivers/i2c/busses/i2c-omap.c @@ -1064,9 +1064,6 @@ omap_i2c_probe(struct platform_device *pdev) goto err_unuse_clocks; } - dev_info(dev->dev, "bus %d rev%d.%d.%d at %d kHz\n", pdev->id, - dev->dtrev, dev->rev >> 4, dev->rev & 0xf, dev->speed); - adap = &dev->adapter; i2c_set_adapdata(adap, dev); adap->owner = THIS_MODULE; @@ -1084,6 +1081,9 @@ omap_i2c_probe(struct platform_device *pdev) goto err_free_irq; } + dev_info(dev->dev, "bus %d rev%d.%d.%d at %d kHz\n", adap->nr, + dev->dtrev, dev->rev >> 4, dev->rev & 0xf, dev->speed); + of_i2c_register_devices(adap); pm_runtime_put(dev->dev); -- 1.7.5.4 -- To unsubscribe from this list: send the line "unsubscribe linux-i2c" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
