add of support for the davinci i2c driver.
Signed-off-by: Heiko Schocher <hs@xxxxxxx>
Cc: davinci-linux-open-source@xxxxxxxxxxxxxxxxxxxx
Cc: linux-arm-kernel@xxxxxxxxxxxxxxxxxxx
Cc: devicetree-discuss@xxxxxxxxxxxxxxxx
Cc: linux-i2c@xxxxxxxxxxxxxxx
Cc: Ben Dooks <ben-linux@xxxxxxxxx>
Cc: Wolfram Sang <w.sang@xxxxxxxxxxxxxx>
Cc: Grant Likely <grant.likely@xxxxxxxxxxxx>
Cc: Sekhar Nori <nsekhar@xxxxxx>
Cc: Wolfgang Denk <wd@xxxxxxx>
Cc: Sylwester Nawrocki <s.nawrocki@xxxxxxxxxxx>
---
- changes for v2:
- add comments from Sylwester Nawrocki <s.nawrocki@xxxxxxxxxxx>:
- use "cell-index" instead "id"
- OF_DEV_AUXDATA in the machine code, instead pre-define platform
device name
- add comment from Grant Likely:
- removed "id" resp. "cell-index" completely
- fixed documentation
- use of_match_ptr()
- use devm_kzalloc() for allocating plattform data mem
- fixed a whitespace issue
- no changes for v3
.../devicetree/bindings/arm/davinci/i2c.txt | 33 +++++++++++++++++
drivers/i2c/busses/i2c-davinci.c | 37 ++++++++++++++++++++
2 files changed, 70 insertions(+), 0 deletions(-)
create mode 100644 Documentation/devicetree/bindings/arm/davinci/i2c.txt
diff --git a/Documentation/devicetree/bindings/arm/davinci/i2c.txt b/Documentation/devicetree/bindings/arm/davinci/i2c.txt
new file mode 100644
index 0000000..ba00d7b
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/davinci/i2c.txt
@@ -0,0 +1,33 @@
+* Texas Instruments Davinci I2C
+
+This file provides information, what the device node for the
+davinci i2c interface contain.
+
+Required properties:
+- compatible: "ti,davinci-i2c";
+- reg : Offset and length of the register set for the device
+
+Recommended properties :
+- interrupts : <a> standard interrupt property.
+- clock-frequency : desired I2C bus clock frequency in Hz.
+
+Optional properties:
+- bus-delay: bus delay in usec
+- pinmux-handle: Contains a handle to configure the pinmux settings.
+
+Example (enbw_cmc board):
+ i2c@1c22000 {
+ compatible = "ti,davinci-i2c";
+ reg = <0x22000 0x1000>;
+ clock-frequency = <100000>;
+ interrupts = <15>;
+ interrupt-parent = <&intc>;
+ pinmux-handle = <&i2c1_pins>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ dtt@48 {
+ compatible = "national,lm75";
+ reg = <0x48>;
+ };
+ };
diff --git a/drivers/i2c/busses/i2c-davinci.c b/drivers/i2c/busses/i2c-davinci.c
index a76d85f..0d07d02 100644
--- a/drivers/i2c/busses/i2c-davinci.c
+++ b/drivers/i2c/busses/i2c-davinci.c
@@ -38,9 +38,12 @@
#include <linux/slab.h>
#include <linux/cpufreq.h>
#include <linux/gpio.h>
+#include <linux/of_i2c.h>
+#include <linux/of_device.h>
#include <mach/hardware.h>
#include <mach/i2c.h>
+#include <mach/mux.h>
/* ----- global defines ----------------------------------------------- */
@@ -635,6 +638,12 @@ static struct i2c_algorithm i2c_davinci_algo = {
.functionality = i2c_davinci_func,
};
+static const struct of_device_id davinci_i2c_of_match[] = {
+ {.compatible = "ti,davinci-i2c", },
+ {},
+};
+MODULE_DEVICE_TABLE(of, davinci_i2c_of_match);
+
static int davinci_i2c_probe(struct platform_device *pdev)
{
struct davinci_i2c_dev *dev;
@@ -676,6 +685,31 @@ static int davinci_i2c_probe(struct platform_device *pdev)
dev->irq = irq->start;
platform_set_drvdata(pdev, dev);
+ if ((dev->dev->platform_data == NULL) &&
+ (pdev->dev.of_node)) {
+ struct device_node *pinmux_np;
+ struct davinci_i2c_platform_data *pdata;
+ u32 prop;
+
+ pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
+ if (!pdata) {
+ r = -ENOMEM;
+ goto err_free_mem;
+ }
+ memcpy(pdata, &davinci_i2c_platform_data_default,
+ sizeof(*pdata));
+ dev->dev->platform_data = pdata;
+ if (!of_property_read_u32(pdev->dev.of_node, "clock-frequency",
+ &prop))
+ pdata->bus_freq = prop / 1000;
+ if (!of_property_read_u32(pdev->dev.of_node, "bus-delay",
+ &prop))
+ pdata->bus_delay = prop;
+ pinmux_np = of_parse_phandle(pdev->dev.of_node,
+ "pinmux-handle", 0);
+ if (pinmux_np)
+ davinci_cfg_reg_of(pinmux_np);
+ }
dev->clk = clk_get(&pdev->dev, NULL);
if (IS_ERR(dev->clk)) {
r = -ENODEV;
@@ -711,6 +745,7 @@ static int davinci_i2c_probe(struct platform_device *pdev)
adap->algo = &i2c_davinci_algo;
adap->dev.parent = &pdev->dev;
adap->timeout = DAVINCI_I2C_TIMEOUT;
+ adap->dev.of_node = pdev->dev.of_node;
adap->nr = pdev->id;
r = i2c_add_numbered_adapter(adap);
@@ -718,6 +753,7 @@ static int davinci_i2c_probe(struct platform_device *pdev)
dev_err(&pdev->dev, "failure adding adapter\n");
goto err_free_irq;
}
+ of_i2c_register_devices(adap);
return 0;
@@ -809,6 +845,7 @@ static struct platform_driver davinci_i2c_driver = {
.name = "i2c_davinci",
.owner = THIS_MODULE,
.pm = davinci_i2c_pm_ops,
+ .of_match_table = of_match_ptr(davinci_i2c_of_match),
},
};
--
1.7.7.6
--
To unsubscribe from this list: send the line "unsubscribe linux-i2c" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
