Re: [RFC PATCH 7/7] ARM: davinci: add support for the am1808 based enbw_cmc board

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, Feb 01, 2012 at 02:20:13PM +0400, Sergei Shtylyov wrote:
> Hello.
> 
> On 31-01-2012 17:04, Heiko Schocher wrote:
> 
> >>On Mon, Jan 23, 2012 at 09:56:07AM +0100, Heiko Schocher wrote:
> >>>- AM1808 based board
> >>>- 64 MiB DDR ram
> >>>- 2 MiB Nor flash
> >>>- 128 MiB NAND flash
> >>>- use internal RTC
> >>>- I2C support
> >>>- hwmon lm75 support
> >>>- UBI/UBIFS support
> >>>- MMC support
> >>>- USB OTG support
> 
> >>>Signed-off-by: Heiko Schocher<hs@xxxxxxx>
> >>>Cc: linux-arm-kernel@xxxxxxxxxxxxxxxxxxx
> >>>Cc: devicetree-discuss@xxxxxxxxxxxxxxxx
> >>>Cc: davinci-linux-open-source@xxxxxxxxxxxxxxxxxxxx
> >>>Cc: linux-mtd@xxxxxxxxxxxxxxxxxxx
> >>>Cc: linux-i2c@xxxxxxxxxxxxxxx
> >>>Cc: netdev@xxxxxxxxxxxxxxx
> >>>Cc: David Woodhouse<dwmw2@xxxxxxxxxxxxx>
> >>>Cc: Ben Dooks<ben-linux@xxxxxxxxx>
> >>>Cc: Wolfram Sang<w.sang@xxxxxxxxxxxxxx>
> >>>Cc: Sekhar Nori<nsekhar@xxxxxx>
> >>>Cc: Kevin Hilman<khilman@xxxxxx>
> >>>Cc: Wolfgang Denk<wd@xxxxxxx>
> 
> >>>---
> >>>- post this board support with USB support, even though
> >>>   USB is only working with the 10 ms "workaround", posted here:
> >>>   http://comments.gmane.org/gmane.linux.usb.general/54505
> >>>   I see this issue also on the AM1808 TMDXEXP1808L evalboard.
> >>>- MMC and USB are not using OF support yet, ideas how to port
> >>>   this are welcome. I need for USB and MMC boards board
> >>>   specific callbacks, how to solve this with OF support?
> 
> [...]
> 
> >>>diff --git a/arch/arm/boot/dts/enbw_cmc.dts b/arch/arm/boot/dts/enbw_cmc.dts
> >>>new file mode 100644
> >>>index 0000000..e5995ce
> >>>--- /dev/null
> >>>+++ b/arch/arm/boot/dts/enbw_cmc.dts
> [...]
> 
> >>>+			compatible = "ns16550a";
> 
> >>Should include a string for the specific device.  Something like:
> 
> >>	compatible = "ti,da800", "ns16550a";
> 
> >added.
> 
>    Note that there's no DA800 chip, only DA828, DA830, and DA850 AFAIK.

Right, so the compatible string should reflect that.

g.

--
To unsubscribe from this list: send the line "unsubscribe linux-i2c" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux GPIO]     [Linux SPI]     [Linux Hardward Monitoring]     [LM Sensors]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux