The reset in the driver at init is not needed anymore as the
following patch has removed the HWMOD_INIT_NO_RESET flag.
6d3c55f [OMAP: hwmod: fix the i2c-reset timeout during bootup]
This patch does the following
-removes the reset from the probe and implements a omap_i2c_reset
function to reset.
- Reset is removed from omap_i2c_init, which was called
not only during probe, but also after time out and error handling.
omap_i2c_reset is added in those places to effect the reset.
Signed-off-by: Shubhrajyoti D <shubhrajyoti@xxxxxx>
---
drivers/i2c/busses/i2c-omap.c | 20 +++++++++++++-------
1 files changed, 13 insertions(+), 7 deletions(-)
diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c
index f713eac..3bfb1ae 100644
--- a/drivers/i2c/busses/i2c-omap.c
+++ b/drivers/i2c/busses/i2c-omap.c
@@ -310,15 +310,9 @@ static void omap_i2c_idle(struct omap_i2c_dev *dev)
}
}
-static int omap_i2c_init(struct omap_i2c_dev *dev)
+static int omap_i2c_reset(struct omap_i2c_dev *dev)
{
- u16 psc = 0, scll = 0, sclh = 0, buf = 0;
- u16 fsscll = 0, fssclh = 0, hsscll = 0, hssclh = 0;
- unsigned long fclk_rate = 12000000;
unsigned long timeout;
- unsigned long internal_clk = 0;
- struct clk *fclk;
-
if (dev->rev >= OMAP_I2C_OMAP1_REV_2) {
/* Disable I2C controller before soft reset */
omap_i2c_write_reg(dev, OMAP_I2C_CON_REG,
@@ -366,6 +360,16 @@ static int omap_i2c_init(struct omap_i2c_dev *dev)
dev->westate);
}
}
+}
+
+static int omap_i2c_init(struct omap_i2c_dev *dev)
+{
+ u16 psc = 0, scll = 0, sclh = 0, buf = 0;
+ u16 fsscll = 0, fssclh = 0, hsscll = 0, hssclh = 0;
+ unsigned long fclk_rate = 12000000;
+ unsigned long internal_clk = 0;
+ struct clk *fclk;
+
omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, 0);
if (dev->flags & OMAP_I2C_FLAG_ALWAYS_ARMXOR_CLK) {
@@ -590,6 +594,7 @@ static int omap_i2c_xfer_msg(struct i2c_adapter *adap,
if (r == 0) {
dev_err(dev->dev, "controller timed out\n");
omap_i2c_init(dev);
+ omap_i2c_reset(dev);
return -ETIMEDOUT;
}
@@ -600,6 +605,7 @@ static int omap_i2c_xfer_msg(struct i2c_adapter *adap,
if (dev->cmd_err & (OMAP_I2C_STAT_AL | OMAP_I2C_STAT_ROVR |
OMAP_I2C_STAT_XUDF)) {
omap_i2c_init(dev);
+ omap_i2c_reset(dev);
return -EIO;
}
--
1.7.1
--
To unsubscribe from this list: send the line "unsubscribe linux-i2c" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
