Hi Eddi, Please don't top-post, and only include as much context as necessary in your replies. On Mon, 5 Dec 2011 23:57:10 +0100, Eddi De Pieri wrote: > I tried in rewriting the driver... but I can't understand the right way... > > since sb800 is a southbus, the mux driver must be defined as > i2c_device, platform_device, or pci_device? Your question doesn't make sense. A driver can't be defined as a device. But anyway I think I understand where your confusion comes from. The SMBus multiplexing as it exists on the SB800 is very different from what was implemented for the Tyan S4882 and S4985 boards. In fact, now that I have a SB800 datasheet, I better understand what you were doing and how it should be implemented. I don't even think you need the multiplexer framework for the SB800. My understanding is that it has 4 almost independent SMBus ports. The only thing that is shared between them is the register set. Contrary to the S4882 and S4985 board multiplexing, it is totally board-independent. So support should go to the i2c-piix4 driver directly. BTW please avoid comments in Italian in your code. Not everyone reads Italian. Use English. > I tried using i2c_device structure, but I can't make sb800 to match > the id_Table.. > I tried usign pci_device structure, but the driver overwrite the pci > space so kernel hangs... You don't need a multiplexer device at all. Please just have i2c-piix4 driver register 4 i2c_adapter devices for the SB800. This would be a 3-step process: 1* Turn piix4_adapter to an array, so that it can hold up to 4 i2c_adapter structures. 2* Add a mutex to prevent concurrent access to the register set. It should be initialized in piix4_setup_sb800(), taken at the very beginning of piix4_access() and released at the very end of this function. 3* Add support for ports 1, 2 and 3 of the SB800. This would ideally be 3 incremental patches to make testing and review easy. I can help with parts 1 and 2 if you want, as this can be tested without a SB800. But it should be fairly easy overall. -- Jean Delvare -- To unsubscribe from this list: send the line "unsubscribe linux-i2c" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
