Re: [PATCH] i2c: reorganize muxes to a standard pattern

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Sun, Nov 27, 2011 at 03:48:47PM -0500, Jean Delvare wrote:
> Hi Wolfram,
> 
> Sorry for the late reply.
> 
> On Sun, 13 Nov 2011 22:41:14 +0100, Wolfram Sang wrote:
> > Analog to ca632f5 (spi: reorganize drivers), introduce a standard pattern
> > for naming the muxes. This is done for the rest of the I2C subsystem already, so
> > we stay in sync with that.
> > 
> > Signed-off-by: Wolfram Sang <w.sang@xxxxxxxxxxxxxx>
> > ---
> > 
> > Only build tested.
> > 
> >  drivers/i2c/muxes/Kconfig                          |    9 ---------
> >  drivers/i2c/muxes/Makefile                         |    6 +++---
> >  .../i2c/muxes/{gpio-i2cmux.c => i2c-mux-gpio.c}    |    0
> >  drivers/i2c/muxes/{pca9541.c => i2c-mux-pca9541.c} |    0
> >  drivers/i2c/muxes/{pca954x.c => i2c-mux-pca954x.c} |    0
> >  5 files changed, 3 insertions(+), 12 deletions(-)
> >  rename drivers/i2c/muxes/{gpio-i2cmux.c => i2c-mux-gpio.c} (100%)
> >  rename drivers/i2c/muxes/{pca9541.c => i2c-mux-pca9541.c} (100%)
> >  rename drivers/i2c/muxes/{pca954x.c => i2c-mux-pca954x.c} (100%)
> 
> You forgot to rename Documentation/i2c/muxes/gpio-i2cmux.
> 
> I thought the naming had been discussed before, but I can't find the
> references, and to be honest the new names please me, so I have no
> reason to decline your proposal. I would have appreciated an ack from
> the driver authors (Cc'd) though. I'll apply your patch as soon as I
> receive an updated version, unless I get an objection before then.
> 

For pca9541.c:

Acked-by: Guenter Roeck <guenter.roeck@xxxxxxxxxxxx>

> > 
> > diff --git a/drivers/i2c/muxes/Kconfig b/drivers/i2c/muxes/Kconfig
> > index 90b7a01..a112d9d 100644
> > --- a/drivers/i2c/muxes/Kconfig
> > +++ b/drivers/i2c/muxes/Kconfig
> > @@ -14,9 +14,6 @@ config I2C_MUX_GPIO
> >  	  I2C busses connected through a MUX, which is controlled
> >  	  through GPIO pins.
> >  
> > -	  This driver can also be built as a module.  If so, the module
> > -	  will be called gpio-i2cmux.
> > -
> >  config I2C_MUX_PCA9541
> >  	tristate "NXP PCA9541 I2C Master Selector"
> >  	depends on EXPERIMENTAL
> > @@ -24,9 +21,6 @@ config I2C_MUX_PCA9541
> >  	  If you say yes here you get support for the NXP PCA9541
> >  	  I2C Master Selector.
> >  
> > -	  This driver can also be built as a module.  If so, the module
> > -	  will be called pca9541.
> > -
> >  config I2C_MUX_PCA954x
> >  	tristate "Philips PCA954x I2C Mux/switches"
> >  	depends on EXPERIMENTAL
> > @@ -34,7 +28,4 @@ config I2C_MUX_PCA954x
> >  	  If you say yes here you get support for the Philips PCA954x
> >  	  I2C mux/switch devices.
> >  
> > -	  This driver can also be built as a module.  If so, the module
> > -	  will be called pca954x.
> > -
> >  endmenu
> > diff --git a/drivers/i2c/muxes/Makefile b/drivers/i2c/muxes/Makefile
> > index 4640436..5826249 100644
> > --- a/drivers/i2c/muxes/Makefile
> > +++ b/drivers/i2c/muxes/Makefile
> > @@ -1,8 +1,8 @@
> >  #
> >  # Makefile for multiplexer I2C chip drivers.
> >  
> > -obj-$(CONFIG_I2C_MUX_GPIO)	+= gpio-i2cmux.o
> > -obj-$(CONFIG_I2C_MUX_PCA9541)	+= pca9541.o
> > -obj-$(CONFIG_I2C_MUX_PCA954x)	+= pca954x.o
> > +obj-$(CONFIG_I2C_MUX_GPIO)	+= i2c-mux-gpio.o
> > +obj-$(CONFIG_I2C_MUX_PCA9541)	+= i2c-mux-pca9541.o
> > +obj-$(CONFIG_I2C_MUX_PCA954x)	+= i2c-mux-pca954x.o
> >  
> >  ccflags-$(CONFIG_I2C_DEBUG_BUS) := -DDEBUG
> > diff --git a/drivers/i2c/muxes/gpio-i2cmux.c b/drivers/i2c/muxes/i2c-mux-gpio.c
> > similarity index 100%
> > rename from drivers/i2c/muxes/gpio-i2cmux.c
> > rename to drivers/i2c/muxes/i2c-mux-gpio.c
> > diff --git a/drivers/i2c/muxes/pca9541.c b/drivers/i2c/muxes/i2c-mux-pca9541.c
> > similarity index 100%
> > rename from drivers/i2c/muxes/pca9541.c
> > rename to drivers/i2c/muxes/i2c-mux-pca9541.c
> > diff --git a/drivers/i2c/muxes/pca954x.c b/drivers/i2c/muxes/i2c-mux-pca954x.c
> > similarity index 100%
> > rename from drivers/i2c/muxes/pca954x.c
> > rename to drivers/i2c/muxes/i2c-mux-pca954x.c
> 
> 
> -- 
> Jean Delvare
--
To unsubscribe from this list: send the line "unsubscribe linux-i2c" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux GPIO]     [Linux SPI]     [Linux Hardward Monitoring]     [LM Sensors]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux