Hello
The i2c-ali1535 driver don't work on SPARC, this is because it assumes that ioport address are 16bits wide (address stored with an unsigned short).
But on SPARC arch, ioports are mapped in memory and so are stored with an unsigned long.
This patch corrects this by using pci_resource_start for getting IOMEM base address, then reading the SMBBA of the i2c busse and using together for I/O access.
I like to thanks Jean DELVARE for reviewing of my patch.
Thanks
Signed-off-by: LABBE Corentin <corentin.labbe@xxxxxxxxxxx>
---
--- drivers/i2c/busses/i2c-ali1535.c.orig 2011-06-15 18:02:56.000000000 +0200
+++ drivers/i2c/busses/i2c-ali1535.c 2011-11-24 12:00:05.000000000 +0100
@@ -132,7 +132,8 @@
#define ALI1535_SMBIO_EN 0x04 /* SMB I/O Space enable */
static struct pci_driver ali1535_driver;
-static unsigned short ali1535_smba;
+static unsigned long ali1535_smba;
+static unsigned short ali1535_offset;
/* Detect whether a ALI1535 can be found, and initialize it, where necessary.
Note the differences between kernels with the old PCI BIOS interface and
@@ -149,15 +150,28 @@ static int __devinit ali1535_setup(struc
- We can use the addresses
*/
+ retval = pci_enable_device(dev);
+ if (retval) {
+ dev_err(&dev->dev, "ALI1535_smb can't enable device\n");
+ goto exit;
+ }
+
/* Determine the address of the SMBus area */
- pci_read_config_word(dev, SMBBA, &ali1535_smba);
- ali1535_smba &= (0xffff & ~(ALI1535_SMB_IOSIZE - 1));
- if (ali1535_smba == 0) {
+ pci_read_config_word(dev, SMBBA, &ali1535_offset);
+ dev_info(&dev->dev, "ALI1535_smb is at offset 0x%04x\n", ali1535_offset);
+ ali1535_offset &= (0xffff & ~(ALI1535_SMB_IOSIZE - 1));
+ if (ali1535_offset == 0) {
dev_warn(&dev->dev,
"ALI1535_smb region uninitialized - upgrade BIOS?\n");
goto exit;
}
+ if ((pci_resource_flags(dev, 0) & IORESOURCE_IO) == 0) {
+ dev_err(&dev->dev, "ALI1535_smb bar 0 is not IORESOURCE_IO\n");
+ goto exit;
+ }
+ ali1535_smba = pci_resource_start(dev, 0) + ali1535_offset;
+
retval = acpi_check_region(ali1535_smba, ALI1535_SMB_IOSIZE,
ali1535_driver.name);
if (retval)
@@ -165,7 +179,7 @@ static int __devinit ali1535_setup(struc
if (!request_region(ali1535_smba, ALI1535_SMB_IOSIZE,
ali1535_driver.name)) {
- dev_err(&dev->dev, "ALI1535_smb region 0x%x already in use!\n",
+ dev_err(&dev->dev, "ALI1535_smb region 0x%lx already in use!\n",
ali1535_smba);
goto exit;
}
@@ -196,7 +210,7 @@ static int __devinit ali1535_setup(struc
*/
pci_read_config_byte(dev, SMBREV, &temp);
dev_dbg(&dev->dev, "SMBREV = 0x%X\n", temp);
- dev_dbg(&dev->dev, "ALI1535_smba = 0x%X\n", ali1535_smba);
+ dev_dbg(&dev->dev, "ALI1535_smba = 0x%lx\n", ali1535_smba);
retval = 0;
exit:
@@ -499,7 +513,7 @@ static int __devinit ali1535_probe(struc
ali1535_adapter.dev.parent = &dev->dev;
snprintf(ali1535_adapter.name, sizeof(ali1535_adapter.name),
- "SMBus ALI1535 adapter at %04x", ali1535_smba);
+ "SMBus ALI1535 adapter at %04x", ali1535_offset);
return i2c_add_adapter(&ali1535_adapter);
}
--
To unsubscribe from this list: send the line "unsubscribe linux-i2c" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
