[PATCH v5 4/4] G45 TWI: remove open drain setting for twi function gpios

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The G45 datasheets explicitly states that setting the open drain property
on peripheral function gpios is not allowed. (How about other A91 chips?)

Signed-off-by: Nikolaus Voss <n.voss@xxxxxxxxxxx>
---
 arch/arm/mach-at91/at91sam9g45_devices.c |    6 ------
 1 files changed, 0 insertions(+), 6 deletions(-)

diff --git a/arch/arm/mach-at91/at91sam9g45_devices.c b/arch/arm/mach-at91/at91sam9g45_devices.c
index 000b5e1..e0f67e7 100644
--- a/arch/arm/mach-at91/at91sam9g45_devices.c
+++ b/arch/arm/mach-at91/at91sam9g45_devices.c
@@ -684,18 +684,12 @@ void __init at91_add_device_i2c(short i2c_id, struct i2c_board_info *devices, in
 	/* pins used for TWI interface */
 	if (i2c_id == 0) {
 		at91_set_A_periph(AT91_PIN_PA20, 0);		/* TWD */
-		at91_set_multi_drive(AT91_PIN_PA20, 1);
-
 		at91_set_A_periph(AT91_PIN_PA21, 0);		/* TWCK */
-		at91_set_multi_drive(AT91_PIN_PA21, 1);
 
 		platform_device_register(&at91sam9g45_twi0_device);
 	} else {
 		at91_set_A_periph(AT91_PIN_PB10, 0);		/* TWD */
-		at91_set_multi_drive(AT91_PIN_PB10, 1);
-
 		at91_set_A_periph(AT91_PIN_PB11, 0);		/* TWCK */
-		at91_set_multi_drive(AT91_PIN_PB11, 1);
 
 		platform_device_register(&at91sam9g45_twi1_device);
 	}
-- 
1.7.5.4

--
To unsubscribe from this list: send the line "unsubscribe linux-i2c" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux GPIO]     [Linux SPI]     [Linux Hardward Monitoring]     [LM Sensors]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux