Hi Sheng-Hui,
On Thu, 3 Nov 2011 12:15:12 -0700, Jeffrey (Sheng-Hui) Chu wrote:
> From 31eb33a1b648f380db284a59d7fa5b4c1a321651 Mon Sep 17 00:00:00 2001
> From: Sheng-Hui J. Chu <jeffchu@xxxxxxxxxxxx>
> Date: Thu, 3 Nov 2011 14:24:06 -0400
> Subject: [PATCH] Generate correct i2c address sequence for 10-bit target.
>
> Signed-off-by: Sheng-Hui J. Chu <jeffchu@xxxxxxxxxxxx>
> ---
> drivers/i2c/algos/i2c-algo-bit.c | 4 ++--
> 1 files changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/i2c/algos/i2c-algo-bit.c b/drivers/i2c/algos/i2c-algo-bit.c
> index 85584a5..525c734 100644
> --- a/drivers/i2c/algos/i2c-algo-bit.c
> +++ b/drivers/i2c/algos/i2c-algo-bit.c
> @@ -488,7 +488,7 @@ static int bit_doAddress(struct i2c_adapter *i2c_adap, struct i2c_msg *msg)
>
> if (flags & I2C_M_TEN) {
> /* a ten bit address */
> - addr = 0xf0 | ((msg->addr >> 7) & 0x03);
> + addr = 0xf0 | ((msg->addr >> 7) & 0x06);
> bit_dbg(2, &i2c_adap->dev, "addr0: %d\n", addr);
> /* try extended address code...*/
> ret = try_address(i2c_adap, addr, retries);
> @@ -498,7 +498,7 @@ static int bit_doAddress(struct i2c_adapter *i2c_adap, struct i2c_msg *msg)
> return -ENXIO;
> }
> /* the remaining 8 bit address */
> - ret = i2c_outb(i2c_adap, msg->addr & 0x7f);
> + ret = i2c_outb(i2c_adap, msg->addr & 0xff);
> if ((ret != 1) && !nak_ok) {
> /* the chip did not ack / xmission error occurred */
> dev_err(&i2c_adap->dev, "died at 2nd address code\n");
Applied, thanks. I wanted to apply it before, but couldn't retrieve it
from bugzilla before it went down. Thanks for resending it.
Note that i2c-core will need some adjustment to properly deal with
7-bit and 10-bit addresses domains (their bus_id currently collide.)
I'll post a proposal for this later today.
--
Jean Delvare
--
To unsubscribe from this list: send the line "unsubscribe linux-i2c" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
