Currently, when checking whether bus is idle or not,
if timeout occurs,
this function always returns success(zero).
This patch fixes the issue.
Signed-off-by: Tomoya MORINAGA <tomoya-linux@xxxxxxxxxxxxxxxxxx>
---
drivers/i2c/busses/i2c-eg20t.c | 18 +++++++++---------
1 files changed, 9 insertions(+), 9 deletions(-)
diff --git a/drivers/i2c/busses/i2c-eg20t.c b/drivers/i2c/busses/i2c-eg20t.c
index 6565009..35d819a 100644
--- a/drivers/i2c/busses/i2c-eg20t.c
+++ b/drivers/i2c/busses/i2c-eg20t.c
@@ -275,23 +275,23 @@ static s32 pch_i2c_wait_for_bus_idle(struct i2c_algo_pch_data *adap,
s32 timeout)
{
void __iomem *p = adap->pch_base_address;
+ ktime_t ns_val;
+
+ if ((ioread32(p + PCH_I2CSR) & I2CMBB_BIT) == 0)
+ return 0;
/* MAX timeout value is timeout*1000*1000nsec */
- ktime_t ns_val = ktime_add_ns(ktime_get(), timeout*1000*1000);
+ ns_val = ktime_add_ns(ktime_get(), timeout*1000*1000);
do {
- if ((ioread32(p + PCH_I2CSR) & I2CMBB_BIT) == 0)
- break;
msleep(20);
+ if ((ioread32(p + PCH_I2CSR) & I2CMBB_BIT) == 0)
+ return 0;
} while (ktime_lt(ktime_get(), ns_val));
pch_dbg(adap, "I2CSR = %x\n", ioread32(p + PCH_I2CSR));
+ pch_err(adap, "%s: Timeout Error.return%d\n", __func__, -ETIME);
- if (timeout == 0) {
- pch_err(adap, "%s: Timeout Error.return%d\n", __func__, -ETIME);
- return -ETIME;
- }
-
- return 0;
+ return -ETIME;
}
/**
--
1.7.4.4
--
To unsubscribe from this list: send the line "unsubscribe linux-i2c" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
