Grant, On 08/05/2011 05:54 PM, Grant Likely wrote: > On Fri, Aug 05, 2011 at 04:24:26PM -0500, Rob Herring wrote: >> From: Rob Herring <rob.herring@xxxxxxxxxxx> >> >> All callers of of_i2c_register_devices are immediately preceded by a call >> to i2c_add_adapter or i2c_add_numbered_adapter. Add call to >> of_i2c_register_devices and remove all other callers. >> >> This causes a module dependency loop that is resolved by the next commit. > > Wrong way around. Don't break bisectability. I'll leave it up to Ben > and Jean on weather or not they want to move this code. I intend to > do the same thing for spi/gpio, but I maintain those subsystems so I > get to choose. i2c is not up to me. > Well, I know, but it's only broken for bisect in the case of both being modules. So it's only run-time brokenness. That's better than the 3 months it was broken before. I couldn't come up with a better way. The choices I thought of were: -temporarily exporting and adding of_i2c_register_devices to i2c.h and then removing it. I'm not a fan of adding that churn. -just combining it all into 1 patch. -reverse the order and leave i2c device registration broken for 1 commit. Thinking some more about it, perhaps that is a bit better than broken module loading. Guess it depends if you are doing modules or built-in. Rob > g. > >> >> Signed-off-by: Rob Herring <rob.herring@xxxxxxxxxxx> >> Cc: Grant Likely <grant.likely@xxxxxxxxxxxx> >> Cc: Jochen Friedrich <jochen@xxxxxxxx> >> Cc: Jean Delvare <khali@xxxxxxxxxxxx> >> Cc: Ben Dooks <ben-linux@xxxxxxxxx> >> Cc: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx> >> Cc: Dirk Brandewie <dirk.brandewie@xxxxxxxxx> >> Cc: Stephen Warren <swarren@xxxxxxxxxx> >> Cc: linuxppc-dev@xxxxxxxxxxxxxxxx >> Cc: linux-i2c@xxxxxxxxxxxxxxx >> --- >> drivers/i2c/busses/i2c-cpm.c | 6 ------ >> drivers/i2c/busses/i2c-ibm_iic.c | 4 ---- >> drivers/i2c/busses/i2c-mpc.c | 2 -- >> drivers/i2c/busses/i2c-pxa.c | 2 -- >> drivers/i2c/busses/i2c-tegra.c | 3 --- >> drivers/i2c/i2c-core.c | 4 ++++ >> 6 files changed, 4 insertions(+), 17 deletions(-) >> >> diff --git a/drivers/i2c/busses/i2c-cpm.c b/drivers/i2c/busses/i2c-cpm.c >> index b1d9cd2..7cbc82a 100644 >> --- a/drivers/i2c/busses/i2c-cpm.c >> +++ b/drivers/i2c/busses/i2c-cpm.c >> @@ -42,7 +42,6 @@ >> #include <linux/dma-mapping.h> >> #include <linux/of_device.h> >> #include <linux/of_platform.h> >> -#include <linux/of_i2c.h> >> #include <sysdev/fsl_soc.h> >> #include <asm/cpm.h> >> >> @@ -673,11 +672,6 @@ static int __devinit cpm_i2c_probe(struct platform_device *ofdev) >> dev_dbg(&ofdev->dev, "hw routines for %s registered.\n", >> cpm->adap.name); >> >> - /* >> - * register OF I2C devices >> - */ >> - of_i2c_register_devices(&cpm->adap); >> - >> return 0; >> out_shut: >> cpm_i2c_shutdown(cpm); >> diff --git a/drivers/i2c/busses/i2c-ibm_iic.c b/drivers/i2c/busses/i2c-ibm_iic.c >> index 3c110fb..5ba15ba 100644 >> --- a/drivers/i2c/busses/i2c-ibm_iic.c >> +++ b/drivers/i2c/busses/i2c-ibm_iic.c >> @@ -42,7 +42,6 @@ >> #include <linux/io.h> >> #include <linux/i2c.h> >> #include <linux/of_platform.h> >> -#include <linux/of_i2c.h> >> >> #include "i2c-ibm_iic.h" >> >> @@ -759,9 +758,6 @@ static int __devinit iic_probe(struct platform_device *ofdev) >> dev_info(&ofdev->dev, "using %s mode\n", >> dev->fast_mode ? "fast (400 kHz)" : "standard (100 kHz)"); >> >> - /* Now register all the child nodes */ >> - of_i2c_register_devices(adap); >> - >> return 0; >> >> error_cleanup: >> diff --git a/drivers/i2c/busses/i2c-mpc.c b/drivers/i2c/busses/i2c-mpc.c >> index 107397a..a433f59 100644 >> --- a/drivers/i2c/busses/i2c-mpc.c >> +++ b/drivers/i2c/busses/i2c-mpc.c >> @@ -18,7 +18,6 @@ >> #include <linux/sched.h> >> #include <linux/init.h> >> #include <linux/of_platform.h> >> -#include <linux/of_i2c.h> >> #include <linux/slab.h> >> >> #include <linux/io.h> >> @@ -637,7 +636,6 @@ static int __devinit fsl_i2c_probe(struct platform_device *op) >> dev_err(i2c->dev, "failed to add adapter\n"); >> goto fail_add; >> } >> - of_i2c_register_devices(&i2c->adap); >> >> return result; >> >> diff --git a/drivers/i2c/busses/i2c-pxa.c b/drivers/i2c/busses/i2c-pxa.c >> index d603646..c1c2885 100644 >> --- a/drivers/i2c/busses/i2c-pxa.c >> +++ b/drivers/i2c/busses/i2c-pxa.c >> @@ -29,7 +29,6 @@ >> #include <linux/errno.h> >> #include <linux/interrupt.h> >> #include <linux/i2c-pxa.h> >> -#include <linux/of_i2c.h> >> #include <linux/platform_device.h> >> #include <linux/err.h> >> #include <linux/clk.h> >> @@ -1147,7 +1146,6 @@ static int i2c_pxa_probe(struct platform_device *dev) >> printk(KERN_INFO "I2C: Failed to add bus\n"); >> goto eadapt; >> } >> - of_i2c_register_devices(&i2c->adap); >> >> platform_set_drvdata(dev, i2c); >> >> diff --git a/drivers/i2c/busses/i2c-tegra.c b/drivers/i2c/busses/i2c-tegra.c >> index 2440b74..9ec0a58 100644 >> --- a/drivers/i2c/busses/i2c-tegra.c >> +++ b/drivers/i2c/busses/i2c-tegra.c >> @@ -26,7 +26,6 @@ >> #include <linux/delay.h> >> #include <linux/slab.h> >> #include <linux/i2c-tegra.h> >> -#include <linux/of_i2c.h> >> >> #include <asm/unaligned.h> >> >> @@ -653,8 +652,6 @@ static int tegra_i2c_probe(struct platform_device *pdev) >> goto err_free_irq; >> } >> >> - of_i2c_register_devices(&i2c_dev->adapter); >> - >> return 0; >> err_free_irq: >> free_irq(i2c_dev->irq, i2c_dev); >> diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c >> index 131079a..011e195 100644 >> --- a/drivers/i2c/i2c-core.c >> +++ b/drivers/i2c/i2c-core.c >> @@ -32,6 +32,7 @@ >> #include <linux/init.h> >> #include <linux/idr.h> >> #include <linux/mutex.h> >> +#include <linux/of_i2c.h> >> #include <linux/of_device.h> >> #include <linux/completion.h> >> #include <linux/hardirq.h> >> @@ -863,6 +864,9 @@ static int i2c_register_adapter(struct i2c_adapter *adap) >> if (adap->nr < __i2c_first_dynamic_bus_num) >> i2c_scan_static_board_info(adap); >> >> + /* Register devices from the device tree */ >> + of_i2c_register_devices(adap); >> + >> /* Notify drivers */ >> mutex_lock(&core_lock); >> bus_for_each_drv(&i2c_bus_type, NULL, adap, __process_new_adapter); >> -- >> 1.7.4.1 >> -- To unsubscribe from this list: send the line "unsubscribe linux-i2c" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html