[PATCHv3] OMAP4: I2C: Enable the wakeup in I2C_WE

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Currently for OMAP4 the I2C_WE is not programmed.
This patch enables the programming for OMAP4.

This patch fixes a bad conflict resolution.
This effectively restores the following commit

Commit 120bdaa47[i2c-omap: Program I2C_WE on OMAP4 to enable i2c wakeup]

which got changed by

Commit a3a7acbc[I2C: OMAP2+: address confused probed version naming]

Reviewed-by: Felipe Balbi <balbi@xxxxxx>
Reported-by: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
Signed-off-by: Shubhrajyoti D <shubhrajyoti@xxxxxx>
---
TODO:
Currently all the wakeup sources are enabled.
There is scope of optimising the same. Will revisit it.
Rebased on for_3.1/i2c-andy
Tested on OMAP4430.

 drivers/i2c/busses/i2c-omap.c |    5 ++---
 1 files changed, 2 insertions(+), 3 deletions(-)

diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c
index d53cd61..84df53f 100644
--- a/drivers/i2c/busses/i2c-omap.c
+++ b/drivers/i2c/busses/i2c-omap.c
@@ -384,9 +384,8 @@ static int omap_i2c_init(struct omap_i2c_dev *dev)
 			 * REVISIT: Some wkup sources might not be needed.
 			 */
 			dev->westate = OMAP_I2C_WE_ALL;
-			if (dev->rev < OMAP_I2C_REV_ON_3530_4430)
-				omap_i2c_write_reg(dev, OMAP_I2C_WE_REG,
-								dev->westate);
+			omap_i2c_write_reg(dev, OMAP_I2C_WE_REG,
+							dev->westate);
 		}
 	}
 	omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, 0);
-- 
1.7.1

--
To unsubscribe from this list: send the line "unsubscribe linux-i2c" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux GPIO]     [Linux SPI]     [Linux Hardward Monitoring]     [LM Sensors]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux