On Fri, Jul 01, 2011 at 10:00:42AM +0900, Yoshihiro Shimoda wrote:
> This driver supports the RIIC module. The SH7757 has it.
> The driver doesn't use any IRQ handler.
I'm making an assumption that this hardware is different enough
from any current driver to make it necessary.
> Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@xxxxxxxxxxx>
> ---
> drivers/i2c/busses/Kconfig | 9 +
> drivers/i2c/busses/Makefile | 1 +
> drivers/i2c/busses/i2c-riic.c | 589 +++++++++++++++++++++++++++++++++++++++++
> include/linux/i2c/riic.h | 29 ++
> 4 files changed, 628 insertions(+), 0 deletions(-)
> create mode 100644 drivers/i2c/busses/i2c-riic.c
> create mode 100644 include/linux/i2c/riic.h
>
> diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
> index 646068e..e057344 100644
> --- a/drivers/i2c/busses/Kconfig
> +++ b/drivers/i2c/busses/Kconfig
> @@ -687,6 +687,15 @@ config I2C_EG20T
> ML7213/ML7223 is companion chip for Intel Atom E6xx series.
> ML7213/ML7223 is completely compatible for Intel EG20T PCH.
>
> +config I2C_RIIC
> + tristate "Renesas RIIC controller"
> + depends on SUPERH
> + help
> + This driver supports the RIIC module of the Renesas SH7757.
> +
> + This driver can also be built as a module. If so, the module
> + will be called i2c-riic.
> +
> comment "External I2C/SMBus adapter drivers"
>
> config I2C_DIOLAN_U2C
> diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile
> index e6cf294..e8c9b1f 100644
> --- a/drivers/i2c/busses/Makefile
> +++ b/drivers/i2c/busses/Makefile
> @@ -66,6 +66,7 @@ obj-$(CONFIG_I2C_VERSATILE) += i2c-versatile.o
> obj-$(CONFIG_I2C_OCTEON) += i2c-octeon.o
> obj-$(CONFIG_I2C_XILINX) += i2c-xiic.o
> obj-$(CONFIG_I2C_EG20T) += i2c-eg20t.o
> +obj-$(CONFIG_I2C_RIIC) += i2c-riic.o
Can we try and keep this list alphabetically sorted please.
> # External I2C/SMBus adapter drivers
> obj-$(CONFIG_I2C_DIOLAN_U2C) += i2c-diolan-u2c.o
> diff --git a/drivers/i2c/busses/i2c-riic.c b/drivers/i2c/busses/i2c-riic.c
> new file mode 100644
> index 0000000..dcc183b
> --- /dev/null
> +++ b/drivers/i2c/busses/i2c-riic.c
> @@ -0,0 +1,589 @@
> +/*
> + * RIIC bus driver
> + *
> + * Copyright (C) 2011 Renesas Solutions Corp.
> + *
> + * Based on i2c-sh_mobile.c
> + * Portion Copyright (C) 2008 Magnus Damm
Can this share code with the previous one?
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; version 2 of the License.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
> + *
> + */
> +
> +#include <linux/kernel.h>
> +#include <linux/platform_device.h>
> +#include <linux/interrupt.h>
> +#include <linux/i2c.h>
> +#include <linux/i2c/riic.h>
> +#include <linux/io.h>
> +#include <linux/timer.h>
> +#include <linux/delay.h>
> +#include <linux/slab.h>
> +
> +#define RIIC_ICCR1 0x00
> +#define RIIC_ICCR2 0x01
> +#define RIIC_ICMR1 0x02
> +#define RIIC_ICMR2 0x03
> +#define RIIC_ICMR3 0x04
> +#define RIIC_ICFER 0x05
> +#define RIIC_ICSER 0x06
> +#define RIIC_ICIER 0x07
> +#define RIIC_ICSR1 0x08
> +#define RIIC_ICSR2 0x09
> +#define RIIC_SARL0 0x0a
> +#define RIIC_SARU0 0x0b
> +#define RIIC_SARL1 0x0c
> +#define RIIC_SARU1 0x0d
> +#define RIIC_SARL2 0x0e
> +#define RIIC_SARU2 0x0f
> +#define RIIC_ICBRL 0x10
> +#define RIIC_ICBRH 0x11
> +#define RIIC_ICDRT 0x12
> +#define RIIC_ICDRR 0x13
> +
> +/* ICCR1 */
> +#define ICCR1_ICE 0x80
> +#define ICCR1_IICRST 0x40
> +#define ICCR1_CLO 0x20
> +#define ICCR1_SOWP 0x10
> +#define ICCR1_SCLO 0x08
> +#define ICCR1_SDAO 0x04
> +#define ICCR1_SCLI 0x02
> +#define ICCR1_SDAI 0x01
> +
> +/* ICCR2 */
> +#define ICCR2_BBSY 0x80
> +#define ICCR2_MST 0x40
> +#define ICCR2_TRS 0x20
> +#define ICCR2_SP 0x08
> +#define ICCR2_RS 0x04
> +#define ICCR2_ST 0x02
> +
> +/* ICMR1 */
> +#define ICMR1_MTWP 0x80
> +#define ICMR1_CKS_MASK 0x70
> +#define ICMR1_BCWP 0x08
> +#define ICMR1_BC_MASK 0x07
> +
> +#define ICMR1_CKS(_x) ((_x << 4) & ICMR1_CKS_MASK)
> +#define ICMR1_BC(_x) (_x & ICMR1_BC_MASK)
you missed a () around _x
> +
> +/* ICMR2 */
> +#define ICMR2_DLCS 0x80
> +#define ICMR2_SDDL_MASK 0x70
> +#define ICMR2_TMOH 0x04
> +#define ICMR2_TMOL 0x02
> +#define ICMR2_TMOS 0x01
> +
> +/* ICMR3 */
> +#define ICMR3_SMBS 0x80
> +#define ICMR3_WAIT 0x40
> +#define ICMR3_RDRFS 0x20
> +#define ICMR3_ACKWP 0x10
> +#define ICMR3_ACKBT 0x08
> +#define ICMR3_ACKBR 0x04
> +#define ICMR3_NF_MASK 0x03
> +
> +/* ICFER */
> +#define ICFER_FMPE 0x80
> +#define ICFER_SCLE 0x40
> +#define ICFER_NFE 0x20
> +#define ICFER_NACKE 0x10
> +#define ICFER_SALE 0x08
> +#define ICFER_NALE 0x04
> +#define ICFER_MALE 0x02
> +#define ICFER_TMOE 0x01
> +
> +/* ICSER */
> +#define ICSER_HOAE 0x80
> +#define ICSER_DIDE 0x20
> +#define ICSER_GCAE 0x08
> +#define ICSER_SAR2E 0x04
> +#define ICSER_SAR1E 0x02
> +#define ICSER_SAR0E 0x01
> +
> +/* ICIER */
> +#define ICIER_TIE 0x80
> +#define ICIER_TEIE 0x40
> +#define ICIER_RIE 0x20
> +#define ICIER_NAKIE 0x10
> +#define ICIER_SPIE 0x08
> +#define ICIER_STIE 0x04
> +#define ICIER_ALIE 0x02
> +#define ICIER_TMOIE 0x01
> +
> +/* ICSR1 */
> +#define ICSR1_HOA 0x80
> +#define ICSR1_DID 0x20
> +#define ICSR1_GCA 0x08
> +#define ICSR1_AAS2 0x04
> +#define ICSR1_AAS1 0x02
> +#define ICSR1_AAS0 0x01
> +
> +/* ICSR2 */
> +#define ICSR2_TDRE 0x80
> +#define ICSR2_TEND 0x40
> +#define ICSR2_RDRF 0x20
> +#define ICSR2_NACKF 0x10
> +#define ICSR2_STOP 0x08
> +#define ICSR2_START 0x04
> +#define ICSR2_AL 0x02
> +#define ICSR2_TMOF 0x01
> +
> +/* SARLn */
> +#define SARL_SVA_MASK 0xfe /* SVA[7:1] */
> +#define SARL_SVA 0x01
> +
> +/* SARUn */
> +#define SARU_SVA_MASK 0x06 /* SVA[9:8] */
> +#define SARU_FS 0x01
> +
> +/* ICBRH */
> +#define ICBRH_RESERVED 0xe0 /* The write value shoud always be 1 */
> +#define ICBRH_BRH_MASK 0x1f
> +
> +/* ICBRL */
> +#define ICBRL_RESERVED 0xe0 /* The write value shoud always be 1 */
> +#define ICBRL_BRL_MASK 0x1f
> +
> +#define RIIC_TIMEOUT 10000 /* 100msec (unit = 10usec) */
> +
> +struct riic_data {
> + struct device *dev;
> + void __iomem *reg;
> + struct i2c_adapter adap;
> + struct i2c_msg *msg;
> +};
> +
> +#define DRIVER_VERSION "2011-07-01"
> +
> +static unsigned char riic_read(struct riic_data *pd, unsigned long addr)
> +{
> + return ioread8(pd->reg + addr);
> +}
> +
> +static void riic_write(struct riic_data *pd, unsigned char data,
> + unsigned long addr)
> +{
> + iowrite8(data, pd->reg + addr);
> +}
> +
> +static void riic_set_bit(struct riic_data *pd, unsigned char val,
> + unsigned long offset)
> +{
> + unsigned char tmp;
> +
> + tmp = riic_read(pd, offset);
> + tmp |= val;
> + riic_write(pd, tmp, offset);
> +}
> +
> +static void riic_clear_bit(struct riic_data *pd, unsigned char val,
> + unsigned long offset)
> +{
> + unsigned char tmp;
> +
> + tmp = riic_read(pd, offset);
> + tmp &= ~val;
> + riic_write(pd, tmp, offset);
as a note, you could have probably merged the above two lines together.
> +}
ok, although you could have probably done a modify but
> +static void riic_set_clock(struct riic_data *pd, int clock)
> +{
> + switch (clock) {
> + case 100:
> + riic_clear_bit(pd, ICFER_FMPE, RIIC_ICFER);
> + riic_clear_bit(pd, ICMR1_CKS_MASK, RIIC_ICMR1);
> + riic_set_bit(pd, ICMR1_CKS(3), RIIC_ICMR1);
> + riic_write(pd, ICBRH_RESERVED | 23, RIIC_ICBRH);
> + riic_write(pd, ICBRL_RESERVED | 23, RIIC_ICBRL);
> + break;
> + case 400:
> + riic_clear_bit(pd, ICFER_FMPE, RIIC_ICFER);
> + riic_clear_bit(pd, ICMR1_CKS_MASK, RIIC_ICMR1);
> + riic_set_bit(pd, ICMR1_CKS(1), RIIC_ICMR1);
> + riic_write(pd, ICBRH_RESERVED | 20, RIIC_ICBRH);
> + riic_write(pd, ICBRL_RESERVED | 19, RIIC_ICBRL);
> + break;
> + case 1000:
> + riic_set_bit(pd, ICFER_FMPE, RIIC_ICFER);
> + riic_clear_bit(pd, ICMR1_CKS_MASK, RIIC_ICMR1);
> + riic_set_bit(pd, ICMR1_CKS(0), RIIC_ICMR1);
> + riic_write(pd, ICBRH_RESERVED | 14, RIIC_ICBRH);
> + riic_write(pd, ICBRL_RESERVED | 14, RIIC_ICBRL);
> + break;
as a note, you could have factored out the two writes to after
the case statement.
> + default:
> + dev_err(pd->dev, "unsupported clock (%dkHz)\n", clock);
> + break;
no error indication to the caller?
> + }
> +}
> +
> +static void riic_init_setting(struct riic_data *pd, int clock)
> +{
> + riic_clear_bit(pd, ICCR1_ICE, RIIC_ICCR1);
> + riic_set_bit(pd, ICCR1_IICRST, RIIC_ICCR1);
> + riic_clear_bit(pd, ICCR1_IICRST, RIIC_ICCR1);
> +
> + riic_write(pd, 0, RIIC_SARL0);
> + riic_write(pd, 0, RIIC_SARU0);
> + riic_write(pd, ICSER_SAR0E, RIIC_ICSER);
> +
> + riic_write(pd, ICMR1_BC(7), RIIC_ICMR1);
> + riic_set_clock(pd, clock);
> +
> + riic_set_bit(pd, ICCR1_ICE, RIIC_ICCR1);
> + riic_set_bit(pd, ICMR3_RDRFS | ICMR3_WAIT | ICMR3_ACKWP, RIIC_ICMR3);
> +}
> +
> +static int riic_check_busy(struct riic_data *pd)
> +{
> + if (riic_read(pd, RIIC_ICCR2) & ICCR2_BBSY) {
> + dev_err(pd->dev, "i2c bus is busy.\n");
> + return -EBUSY;
> + }
> +
> + return 0;
> +}
> +
> +static int riic_wait_for_icsr2(struct riic_data *pd, unsigned short bit)
> +{
> + unsigned char icsr2;
> + int timeout = RIIC_TIMEOUT;
> +
> + while (timeout-- > 0) {
> + icsr2 = riic_read(pd, RIIC_ICSR2);
> + if (icsr2 & ICSR2_NACKF)
> + return -EIO;
> + if (icsr2 & bit)
> + return 0;
> + udelay(10);
> + }
> +
> + dev_err(pd->dev, "%s: bit = %x icsr2 = %x, iccr2 = %x\n", __func__,
> + bit, riic_read(pd, RIIC_ICSR2), riic_read(pd, RIIC_ICCR2));
> +
> + return -ETIMEDOUT;
> +}
> +
> +static int riic_send_slave_address(struct riic_data *pd, int read)
> +{
> + unsigned char sa_rw[2];
> + int ret;
> +
> + if (pd->msg->flags & I2C_M_TEN) {
> + sa_rw[0] = ((((pd->msg->addr & 0x300) >> 8) | 0x78) << 1);
> + sa_rw[0] |= read;
> + sa_rw[1] = pd->msg->addr & 0xff;
> + ret = riic_wait_for_icsr2(pd, ICSR2_TDRE);
> + if (ret < 0)
> + return ret;
> + riic_write(pd, sa_rw[0], RIIC_ICDRT);
> + ret = riic_wait_for_icsr2(pd, ICSR2_TDRE);
> + if (ret < 0)
> + return ret;
> + riic_write(pd, sa_rw[1], RIIC_ICDRT);
> + } else {
> + sa_rw[0] = (pd->msg->addr << 1) | read;
> + ret = riic_wait_for_icsr2(pd, ICSR2_TDRE);
> + if (ret < 0)
> + return ret;
> + riic_write(pd, sa_rw[0], RIIC_ICDRT);
> + }
> + return 0;
> +}
do you really want to be busy waiting on a 100kHz bus where
peripherals are allowed to stall transfers? wouldn't using
interrupts to do the transfer be better?
> +static int riic_master_transmit(struct riic_data *pd, int stop)
> +{
> + int ret = 0;
> + int index;
> +
> + riic_set_bit(pd, ICCR2_ST, RIIC_ICCR2);
> + ret = riic_wait_for_icsr2(pd, ICSR2_START);
> + if (ret < 0)
> + goto force_exit;
> + riic_clear_bit(pd, ICSR2_START, RIIC_ICSR2);
> +
> + ret = riic_send_slave_address(pd, 0);
> + if (ret < 0)
> + goto force_exit;
> +
> + /* transmit data */
> + index = 0;
> + do {
> + ret = riic_wait_for_icsr2(pd, ICSR2_TDRE);
> + if (ret < 0)
> + goto force_exit;
> +
> + riic_write(pd, pd->msg->buf[index], RIIC_ICDRT);
> + index++;
> + } while (pd->msg->len > index);
> +
> + ret = riic_wait_for_icsr2(pd, ICSR2_TEND);
> + if (ret < 0)
> + goto force_exit;
> +
> +force_exit:
> + if (stop) {
> + riic_clear_bit(pd, ICSR2_STOP | ICSR2_NACKF, RIIC_ICSR2);
> + riic_set_bit(pd, ICCR2_SP, RIIC_ICCR2);
> + riic_wait_for_icsr2(pd, ICSR2_STOP);
> + }
> + riic_clear_bit(pd, ICSR2_STOP | ICSR2_NACKF, RIIC_ICSR2);
> +
> + return ret;
> +}
> +
> +static void riic_set_receive_ack(struct riic_data *pd, int ack)
> +{
> + if (ack)
> + riic_clear_bit(pd, ICMR3_ACKBT, RIIC_ICMR3);
> + else
> + riic_set_bit(pd, ICMR3_ACKBT, RIIC_ICMR3);
> +}
> +
> +static int riic_master_receive(struct riic_data *pd, int restart)
> +{
> + int dummy_read = 1;
> + int ret = 0;
> + int index;
> +
> + if (restart)
> + riic_set_bit(pd, ICCR2_RS, RIIC_ICCR2);
> + else
> + riic_set_bit(pd, ICCR2_ST, RIIC_ICCR2);
> +
> + ret = riic_wait_for_icsr2(pd, ICSR2_START);
> + if (ret < 0)
> + return ret;
> + riic_clear_bit(pd, ICSR2_START, RIIC_ICSR2);
> +
> + /* send slave address */
> + ret = riic_send_slave_address(pd, 1);
> + if (ret < 0)
> + return ret;
> +
> + ret = riic_wait_for_icsr2(pd, ICSR2_RDRF);
> + if (ret < 0)
> + return ret;
> +
> + if (riic_read(pd, RIIC_ICSR2) & ICSR2_NACKF) {
> + /* received NACK */
> + riic_clear_bit(pd, ICSR2_STOP, RIIC_ICSR2);
> + riic_set_bit(pd, ICCR2_SP, RIIC_ICCR2);
> + riic_read(pd, RIIC_ICDRR); /* dummy read */
> + goto force_exit;
> + }
> +
> + /* receive data */
> + index = 0;
> + while ((pd->msg->len - 1) > index) {
> + ret = riic_wait_for_icsr2(pd, ICSR2_RDRF);
> + if (ret < 0)
> + return ret;
> +
> + if ((index + 1) >= (pd->msg->len - 1))
> + break;
> +
> + if (dummy_read) {
> + riic_read(pd, RIIC_ICDRR);
> + dummy_read = 0;
> + } else {
> + pd->msg->buf[index] = riic_read(pd, RIIC_ICDRR);
> + index++;
> + riic_set_receive_ack(pd, 1);
> + }
> + }
> +
> + /* step 6 */
> + ret = riic_wait_for_icsr2(pd, ICSR2_RDRF);
> + if (ret < 0)
> + return ret;
> +
> + /* step 7 */
> + if (dummy_read) {
> + riic_read(pd, RIIC_ICDRR);
> + dummy_read = 0;
> + } else {
> + pd->msg->buf[index] = riic_read(pd, RIIC_ICDRR);
> + index++;
> + }
> + riic_set_receive_ack(pd, 1);
> +
> + ret = riic_wait_for_icsr2(pd, ICSR2_RDRF);
> + if (ret < 0)
> + return ret;
> +
> + riic_clear_bit(pd, ICSR2_STOP, RIIC_ICSR2);
> + riic_set_bit(pd, ICCR2_SP, RIIC_ICCR2);
> +
> + pd->msg->buf[index] = riic_read(pd, RIIC_ICDRR);
> + index++;
> + riic_set_receive_ack(pd, 0);
> +
> +force_exit:
> + ret = riic_wait_for_icsr2(pd, ICSR2_STOP);
> + if (ret < 0)
> + return ret;
> +
> + riic_clear_bit(pd, ICSR2_STOP | ICSR2_NACKF, RIIC_ICSR2);
> +
> + return ret;
> +}
> +
> +static int riic_xfer(struct i2c_adapter *adapter, struct i2c_msg *msgs,
> + int num)
> +{
> + struct riic_data *pd = i2c_get_adapdata(adapter);
> + int i, ret = 0;
> + int restart = num > 1 ? 1 : 0;
> + int stop;
> +
> + if (riic_check_busy(pd))
> + return -EBUSY;
> +
> + for (i = 0; (i < num) && !ret; i++) {
> + pd->msg = &msgs[i];
> + stop = (i == num - 1);
> +
> + if (pd->msg->flags & I2C_M_RD)
> + ret = riic_master_receive(pd, restart);
> + else
> + ret = riic_master_transmit(pd, stop);
> + }
> +
> + return !ret ? num : ret;
> +}
> +
> +static u32 riic_func(struct i2c_adapter *adapter)
> +{
> + return I2C_FUNC_I2C | I2C_FUNC_10BIT_ADDR | I2C_FUNC_SMBUS_EMUL;
> +}
> +
> +static struct i2c_algorithm riic_algorithm = {
> + .functionality = riic_func,
> + .master_xfer = riic_xfer,
> +};
> +
> +static int __devexit riic_remove(struct platform_device *pdev)
> +{
> + struct riic_data *pd = platform_get_drvdata(pdev);
> +
> + if (!pd)
> + return 0;
> +
> + i2c_del_adapter(&pd->adap);
> + iounmap(pd->reg);
> + kfree(pd);
> +
> + return 0;
> +}
> +
> +static int __devinit riic_probe(struct platform_device *pdev)
> +{
> + struct resource *res = NULL;
> + struct riic_data *pd = NULL;
> + struct riic_platform_data *riic_data = NULL;
> + struct i2c_adapter *adap;
> + void __iomem *reg = NULL;
> + int ret = 0;
> +
> + res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> + if (!res) {
> + ret = -ENODEV;
> + dev_err(&pdev->dev, "platform_get_resource error.\n");
> + goto clean_up;
> + }
do you really want to be generating -ENODEV here. It will
be ignored by the upper level.
> + if (!pdev->dev.platform_data) {
> + dev_err(&pdev->dev, "no platform data\n");
you forgot to set ret here.
> + goto clean_up;
> + }
> + riic_data = pdev->dev.platform_data;
> + reg = ioremap(res->start, resource_size(res));
> + if (reg == NULL) {
> + ret = -ENOMEM;
don't think this is the correct error return here.
> + dev_err(&pdev->dev, "ioremap error.\n");
> + goto clean_up;
> + }
> +
> + pd = kzalloc(sizeof(struct riic_data), GFP_KERNEL);
> + if (pd == NULL) {
> + ret = -ENOMEM;
> + dev_err(&pdev->dev, "kzalloc error.\n");
personally, I would use failed instead of error.
> + goto clean_up;
> + }
> +
> + pd->dev = &pdev->dev;
> + pd->reg = reg;
> + platform_set_drvdata(pdev, pd);
> +
> + adap = &pd->adap;
> + i2c_set_adapdata(adap, pd);
> +
> + adap->owner = THIS_MODULE;
> + adap->algo = &riic_algorithm;
> + adap->dev.parent = &pdev->dev;
> + adap->retries = 5;
> + adap->nr = pdev->id;
> +
> + strlcpy(adap->name, pdev->name, sizeof(adap->name));
think you should be using dev_name() instead of using pdev->name
> + riic_init_setting(pd, riic_data->clock);
> +
> + ret = i2c_add_numbered_adapter(adap);
> + if (ret < 0) {
> + dev_err(&pdev->dev, "i2c_add_numbered_adapter error.\n");
> + goto clean_up;
> + }
> +
> + dev_info(&pdev->dev, "version %s\n", DRIVER_VERSION);
> + return ret;
> +
> +clean_up:
> + if (reg)
> + iounmap(reg);
> + kfree(pd);
> + platform_set_drvdata(pdev, NULL);
> +
> + return ret;
> +}
> +
> +static struct platform_driver riic_driver = {
> + .probe = riic_probe,
> + .remove = __devexit_p(riic_remove),
> + .driver = {
> + .name = "i2c-riic",
> + .owner = THIS_MODULE,
> + },
> +};
> +
> +static int __init riic_init(void)
> +{
> + return platform_driver_register(&riic_driver);
> +}
> +module_init(riic_init);
> +
> +static void __exit riic_cleanup(void)
> +{
> + platform_driver_unregister(&riic_driver);
> +}
> +module_exit(riic_cleanup);
> +
> +MODULE_DESCRIPTION("Renesas RIIC Driver");
> +MODULE_LICENSE("GPL");
> +MODULE_AUTHOR("Yoshihiro Shimoda");
> +MODULE_ALIAS("platform:i2c-riic");
> diff --git a/include/linux/i2c/riic.h b/include/linux/i2c/riic.h
> new file mode 100644
> index 0000000..5839381
> --- /dev/null
> +++ b/include/linux/i2c/riic.h
> @@ -0,0 +1,29 @@
> +/*
> + * RIIC bus driver
> + *
> + * Copyright (C) 2011 Renesas Solutions Corp.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; version 2 of the License.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
> + *
> + */
> +
> +#ifndef _RIIC_H_
> +#define _RIIC_H_
> +
> +struct riic_platform_data {
> + int clock; /* i2c clock (kHZ) */
> +};
> +
> +#endif
--
To unsubscribe from this list: send the line "unsubscribe linux-i2c" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
