From: Ganesan Ramalingam <ganesanr@xxxxxxxxxxxxxxxxx>
- platform.c : add i2c platform device
- i2c-xlr.c : algorithm and i2c adaptor
- Kconfig/Makefile: add CONFIG_I2C_XLR option
Signed-off-by: Ganesan Ramalingam <ganesanr@xxxxxxxxxxxxxxxxx>
Signed-off-by: Jayachandran C <jayachandranc@xxxxxxxxxxxxxxxxx>
---
arch/mips/configs/nlm_xlr_defconfig | 4 +
arch/mips/netlogic/xlr/platform.c | 29 +++
drivers/i2c/busses/Kconfig | 11 ++
drivers/i2c/busses/Makefile | 1 +
drivers/i2c/busses/i2c-xlr.c | 335 +++++++++++++++++++++++++++++++++++
5 files changed, 380 insertions(+), 0 deletions(-)
create mode 100644 drivers/i2c/busses/i2c-xlr.c
diff --git a/arch/mips/configs/nlm_xlr_defconfig b/arch/mips/configs/nlm_xlr_defconfig
index e4b399f..6431fd3 100644
--- a/arch/mips/configs/nlm_xlr_defconfig
+++ b/arch/mips/configs/nlm_xlr_defconfig
@@ -365,6 +365,10 @@ CONFIG_SERIAL_8250_RSA=y
CONFIG_HW_RANDOM=y
CONFIG_HW_RANDOM_TIMERIOMEM=m
CONFIG_RAW_DRIVER=m
+CONFIG_I2C=y
+CONFIG_I2C_XLR=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_DS1374=y
# CONFIG_HWMON is not set
# CONFIG_VGA_CONSOLE is not set
# CONFIG_HID_SUPPORT is not set
diff --git a/arch/mips/netlogic/xlr/platform.c b/arch/mips/netlogic/xlr/platform.c
index 609ec25..2cd2d3c 100644
--- a/arch/mips/netlogic/xlr/platform.c
+++ b/arch/mips/netlogic/xlr/platform.c
@@ -14,6 +14,7 @@
#include <linux/resource.h>
#include <linux/serial_8250.h>
#include <linux/serial_reg.h>
+#include <linux/i2c.h>
#include <asm/netlogic/xlr/iomap.h>
#include <asm/netlogic/xlr/pic.h>
@@ -66,6 +67,34 @@ void nlm_xlr_uart_out(struct uart_port *p, int offset, int value)
.serial_out = nlm_xlr_uart_out, \
}
+#ifdef CONFIG_I2C
+static struct i2c_board_info nlm_i2c_info1[] __initdata = {
+ /* All XLR boards have this RTC and Max6657 Temp Chip */
+ {"ds1374", 0, 0x68, 0, 0, 0},
+ {"lm90", 0, 0x4c, 0, 0, 0},
+};
+
+static struct platform_device nlm_xlr_i2c_1 = {
+ .name = "xlr_i2cbus",
+ .id = 1,
+};
+
+static int __init nlm_i2c_init(void)
+{
+ int err = 0;
+
+ platform_device_register(&nlm_xlr_i2c_1);
+
+ err = i2c_register_board_info(1, nlm_i2c_info1,
+ ARRAY_SIZE(nlm_i2c_info1));
+ if (err < 0)
+ pr_err("nlm-i2c: cannot register board I2C devices\n");
+ return err;
+}
+
+arch_initcall(nlm_i2c_init);
+#endif
+
static struct plat_serial8250_port xlr_uart_data[] = {
PORT(PIC_UART_0_IRQ),
PORT(PIC_UART_1_IRQ),
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index 646068e..a75af78 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -309,6 +309,17 @@ config I2C_AU1550
This driver can also be built as a module. If so, the module
will be called i2c-au1550.
+config I2C_XLR
+ tristate "XLR I2C support"
+ depends on I2C && CPU_XLR
+ help
+ This driver enables support for the on-chip I2C interface of
+ the Netlogic XLR/XLS MIPS processors.
+
+ Say yes to this option if you have a Netlogic XLR/XLS based
+ board and you need to access the I2C devices (typically the
+ RTC, sensors, EEPROM) connected to this interface.
+
config I2C_BLACKFIN_TWI
tristate "Blackfin TWI I2C support"
depends on BLACKFIN
diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile
index e6cf294..14e7a76 100644
--- a/drivers/i2c/busses/Makefile
+++ b/drivers/i2c/busses/Makefile
@@ -65,6 +65,7 @@ obj-$(CONFIG_I2C_TEGRA) += i2c-tegra.o
obj-$(CONFIG_I2C_VERSATILE) += i2c-versatile.o
obj-$(CONFIG_I2C_OCTEON) += i2c-octeon.o
obj-$(CONFIG_I2C_XILINX) += i2c-xiic.o
+obj-$(CONFIG_I2C_XLR) += i2c-xlr.o
obj-$(CONFIG_I2C_EG20T) += i2c-eg20t.o
# External I2C/SMBus adapter drivers
diff --git a/drivers/i2c/busses/i2c-xlr.c b/drivers/i2c/busses/i2c-xlr.c
new file mode 100644
index 0000000..ac3d989
--- /dev/null
+++ b/drivers/i2c/busses/i2c-xlr.c
@@ -0,0 +1,335 @@
+/*
+ * Copyright 2011, Netlogic Microsystems Inc.
+ * Copyright 2004, Matt Porter <mporter@xxxxxxxxxxxxxxxxxxx>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/init.h>
+#include <linux/ioport.h>
+#include <linux/delay.h>
+#include <linux/errno.h>
+#include <linux/i2c.h>
+#include <linux/io.h>
+#include <linux/platform_device.h>
+#include <asm/netlogic/xlr/iomap.h>
+
+/* XLR I2C REGISTERS */
+#define XLR_I2C_CFG 0x00
+#define XLR_I2C_CLKDIV 0x01
+#define XLR_I2C_DEVADDR 0x02
+#define XLR_I2C_ADDR 0x03
+#define XLR_I2C_DATAOUT 0x04
+#define XLR_I2C_DATAIN 0x05
+#define XLR_I2C_STATUS 0x06
+#define XLR_I2C_STARTXFR 0x07
+#define XLR_I2C_BYTECNT 0x08
+#define XLR_I2C_HDSTATIM 0x09
+
+/* XLR I2C REGISTERS FLAGS */
+#define XLR_I2C_BUS_BUSY 0x01
+#define XLR_I2C_SDOEMPTY 0x02
+#define XLR_I2C_RXRDY 0x04
+#define XLR_I2C_ACK_ERR 0x08
+#define XLR_I2C_ARB_STARTERR 0x30
+
+/* Register Programming Values!! Change as required */
+#define XLR_I2C_CFG_ADDR 0xF8 /* 8-Bit dev Addr + POR Values */
+#define XLR_I2C_CFG_NOADDR 0xFA /* 8-Bit reg Addr + POR Values */
+#define XLR_I2C_STARTXFR_ND 0x02 /* No data , only addr */
+#define XLR_I2C_STARTXFR_RD 0x01 /* Read */
+#define XLR_I2C_STARTXFR_WR 0x00 /* Write */
+#define XLR_I2C_CLKDIV_DEF 0x14A /* 0x00000052 */
+#define XLR_I2C_HDSTATIM_DEF 0x107 /* 0x00000000 */
+
+struct xlr_i2c_private {
+ struct i2c_adapter adap;
+ u32 *iobase_i2c_regs;
+};
+static struct xlr_i2c_private xlr_i2c_priv;
+
+u32 *get_i2c_base(unsigned short bus)
+{
+ nlm_reg_t *mmio = 0;
+
+ if (bus == 0)
+ mmio = netlogic_io_mmio(NETLOGIC_IO_I2C_0_OFFSET);
+ else
+ mmio = netlogic_io_mmio(NETLOGIC_IO_I2C_1_OFFSET);
+
+ return (u32 *)mmio;
+}
+
+static void xlr_i2c_write(u32 *iobase_i2c_regs, int reg, int val)
+{
+ netlogic_write_reg(iobase_i2c_regs, reg, val);
+}
+
+static u32 xlr_i2c_read(u32 *iobase_i2c_regs, int reg)
+{
+ u32 retVal = netlogic_read_reg(iobase_i2c_regs, reg);
+ return retVal;
+}
+
+static int xlr_i2c_tx(struct xlr_i2c_private *priv, u16 len,
+ u8 *buf, u16 addr, u8 offset)
+{
+ u32 i2c_status = 0x00;
+ u8 nb;
+ int pos;
+
+ xlr_i2c_write(priv->iobase_i2c_regs, XLR_I2C_ADDR, offset);
+ xlr_i2c_write(priv->iobase_i2c_regs, XLR_I2C_DEVADDR, addr);
+ xlr_i2c_write(priv->iobase_i2c_regs, XLR_I2C_CFG, XLR_I2C_CFG_ADDR);
+ xlr_i2c_write(priv->iobase_i2c_regs, XLR_I2C_BYTECNT, len - 1);
+
+retry:
+ pos = 0;
+ xlr_i2c_write(priv->iobase_i2c_regs, XLR_I2C_DATAOUT, buf[pos]);
+ xlr_i2c_write(priv->iobase_i2c_regs, XLR_I2C_STARTXFR,
+ XLR_I2C_STARTXFR_WR);
+
+ while (1) {
+ i2c_status = xlr_i2c_read(priv->iobase_i2c_regs,
+ XLR_I2C_STATUS);
+
+ if (i2c_status & XLR_I2C_SDOEMPTY) {
+ pos++;
+ nb = (pos < len) ? buf[pos] : 0;
+ xlr_i2c_write(priv->iobase_i2c_regs, XLR_I2C_DATAOUT,
+ nb);
+ }
+
+ if (i2c_status & XLR_I2C_ARB_STARTERR)
+ goto retry;
+
+ if (i2c_status & XLR_I2C_ACK_ERR) {
+ dev_err(&priv->adap.dev, "ACK ERR\n");
+ return -1;
+ }
+
+ if (i2c_status & XLR_I2C_BUS_BUSY)
+ continue;
+
+ if (pos >= len)
+ break;
+ }
+
+ return 0;
+}
+
+static int xlr_i2c_rx(struct xlr_i2c_private *priv, u16 len,
+ u8 *buf, u16 addr, u8 offset)
+{
+ u32 i2c_status = 0x00;
+ int pos = 0;
+ int timeOut = 0;
+ struct i2c_adapter *adap = &priv->adap;
+
+ xlr_i2c_write(priv->iobase_i2c_regs, XLR_I2C_ADDR, offset);
+ xlr_i2c_write(priv->iobase_i2c_regs, XLR_I2C_DEVADDR, addr);
+ xlr_i2c_write(priv->iobase_i2c_regs, XLR_I2C_CFG, XLR_I2C_CFG_ADDR);
+ xlr_i2c_write(priv->iobase_i2c_regs, XLR_I2C_BYTECNT, 0);
+
+retry_nd:
+ xlr_i2c_write(priv->iobase_i2c_regs, XLR_I2C_STARTXFR,
+ XLR_I2C_STARTXFR_ND);
+ while (1) {
+ if (timeOut++ > 0x1000) {
+ dev_err(&adap->dev, "XLR_I2C_STARTXFR_ND Rx Timeout\n");
+ return -1;
+ }
+
+ i2c_status = xlr_i2c_read(priv->iobase_i2c_regs,
+ XLR_I2C_STATUS);
+ if (i2c_status & XLR_I2C_ARB_STARTERR)
+ goto retry_nd;
+
+ if (i2c_status & XLR_I2C_ACK_ERR) {
+ dev_err(&adap->dev, "XLR_I2C_STARTXFR_ND ACK ERR\n");
+ return -1;
+ }
+ if ((i2c_status & XLR_I2C_BUS_BUSY) == 0)
+ break;
+ udelay(1);
+ }
+
+ xlr_i2c_write(priv->iobase_i2c_regs, XLR_I2C_CFG, XLR_I2C_CFG_NOADDR);
+ xlr_i2c_write(priv->iobase_i2c_regs, XLR_I2C_BYTECNT, len-1);
+ xlr_i2c_write(priv->iobase_i2c_regs, XLR_I2C_ADDR, offset);
+ xlr_i2c_write(priv->iobase_i2c_regs, XLR_I2C_DEVADDR, addr);
+ timeOut = 0;
+
+retry:
+ xlr_i2c_write(priv->iobase_i2c_regs, XLR_I2C_STARTXFR,
+ XLR_I2C_STARTXFR_RD);
+
+ while (1) {
+ if (timeOut++ > 0x1000) {
+ dev_err(&adap->dev, "XLR_I2C_STARTXFR_RD Rx Timeout\n");
+ return -1;
+ }
+
+ i2c_status = xlr_i2c_read(priv->iobase_i2c_regs,
+ XLR_I2C_STATUS);
+ if (i2c_status & XLR_I2C_RXRDY) {
+ buf[pos++] = (u8)xlr_i2c_read(priv->iobase_i2c_regs,
+ XLR_I2C_DATAIN);
+ }
+
+ if (i2c_status & XLR_I2C_ARB_STARTERR)
+ goto retry;
+
+ if (i2c_status & XLR_I2C_ACK_ERR) {
+ dev_err(&adap->dev, "XLR_I2C_STARTXFR_ND ACK ERR\n");
+ return -1;
+ }
+
+ if (i2c_status & XLR_I2C_BUS_BUSY) {
+ udelay(1);
+ continue;
+ }
+ break;
+ }
+ return 0;
+}
+
+static int smbus_xfer(struct i2c_adapter *i2c_adap,
+ u16 addr,
+ unsigned short flags,
+ char read_write,
+ u8 command,
+ int protocol,
+ union i2c_smbus_data *data)
+{
+ struct xlr_i2c_private *priv = i2c_adap->algo_data;
+ int err;
+ int len;
+
+ switch (protocol) {
+ case I2C_SMBUS_BYTE:
+ if (read_write == I2C_SMBUS_READ)
+ err = xlr_i2c_rx(priv, 1, &data->byte, addr, command);
+ else
+ err = xlr_i2c_tx(priv, 1, &data->byte, addr, command);
+
+ break;
+ case I2C_SMBUS_BYTE_DATA:
+ if (read_write == I2C_SMBUS_READ)
+ err = xlr_i2c_rx(priv, 1, &data->byte, addr, command);
+ else
+ err = xlr_i2c_tx(priv, 1, &data->byte, addr, command);
+ break;
+
+ case I2C_SMBUS_WORD_DATA:
+ case I2C_SMBUS_PROC_CALL:
+ if (read_write == I2C_SMBUS_READ)
+ err = xlr_i2c_rx(priv, 2, (u8 *)&data->word,
+ addr, command);
+ else
+ err = xlr_i2c_tx(priv, 2, (u8 *)&data->word,
+ addr, command);
+
+ break;
+ case I2C_FUNC_SMBUS_BLOCK_DATA:
+ case I2C_SMBUS_I2C_BLOCK_DATA:
+ len = (data->block[0] > I2C_SMBUS_BLOCK_MAX) ?
+ I2C_SMBUS_BLOCK_MAX : data->block[0];
+ if (read_write == I2C_SMBUS_READ)
+ err = xlr_i2c_rx(priv, len, &data->block[1],
+ addr, command);
+ else
+ err = xlr_i2c_tx(priv, len, &data->block[1],
+ addr, command);
+
+ break;
+ default:
+ err = -1;
+ }
+ return err;
+}
+
+static u32 xlr_func(struct i2c_adapter *adap)
+{
+ /* We emulate SMBUS over I2C */
+ return I2C_FUNC_SMBUS_EMUL;
+}
+
+static struct i2c_algorithm xlr_i2c_algo = {
+ .smbus_xfer = smbus_xfer,
+ .functionality = xlr_func,
+};
+
+int xlr_i2c_add_bus(struct xlr_i2c_private *priv)
+{
+ priv->adap.owner = THIS_MODULE;
+ priv->adap.algo_data = priv;
+ priv->adap.nr = 1;
+ priv->adap.algo = &xlr_i2c_algo;
+ priv->adap.class = I2C_CLASS_HWMON | I2C_CLASS_SPD;
+ snprintf(priv->adap.name, sizeof(priv->adap.name),
+ "SMBus XLR I2C Adapter");
+
+ /* register new adapter to i2c module... */
+ if (i2c_add_numbered_adapter(&priv->adap))
+ return -1;
+
+ return 0;
+}
+
+int xlr_i2c_del_bus(struct i2c_adapter *adap)
+{
+ return i2c_del_adapter(adap);
+}
+
+static int __devinit xlr_i2c_probe(struct platform_device *pd)
+{
+ xlr_i2c_priv.iobase_i2c_regs = get_i2c_base(pd->id);
+
+ xlr_i2c_priv.adap.dev.parent = &pd->dev;
+ if (xlr_i2c_add_bus(&xlr_i2c_priv) < 0) {
+ dev_err(&xlr_i2c_priv.adap.dev, "Failed to add i2c bus\n");
+ goto out;
+ } else
+ dev_info(&xlr_i2c_priv.adap.dev, "Added I2C Bus.\n");
+
+ return 0;
+out:
+ return -ENODEV;
+}
+
+static int __devexit xlr_i2c_remove(struct platform_device *pd)
+{
+ return xlr_i2c_del_bus(&xlr_i2c_priv.adap);
+}
+
+static struct platform_driver xlr_i2c_driver = {
+ .probe = xlr_i2c_probe,
+ .remove = __devexit_p(xlr_i2c_remove),
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "xlr_i2cbus",
+ },
+};
+
+static int __init xlr_i2c_init(void)
+{
+ return platform_driver_register(&xlr_i2c_driver);
+}
+
+static void __exit xlr_i2c_exit(void)
+{
+ platform_driver_unregister(&xlr_i2c_driver);
+}
+
+MODULE_AUTHOR("Netlogic Microsystems Inc.");
+MODULE_DESCRIPTION("XLR I2C SMBus driver");
+MODULE_LICENSE("GPL");
+
+module_init(xlr_i2c_init);
+module_exit(xlr_i2c_exit);
--
1.7.4.1
--
To unsubscribe from this list: send the line "unsubscribe linux-i2c" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
