* Print all error and information messages even when debugging is
disabled.
* Don't use adapter device to log messages before it is ready.
Signed-off-by: Jean Delvare <khali@xxxxxxxxxxxx>
---
drivers/i2c/busses/i2c-taos-evm.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
--- linux-3.0-rc2.orig/drivers/i2c/busses/i2c-taos-evm.c 2010-08-02 00:11:14.000000000 +0200
+++ linux-3.0-rc2/drivers/i2c/busses/i2c-taos-evm.c 2011-06-08 18:06:32.000000000 +0200
@@ -234,7 +234,7 @@ static int taos_connect(struct serio *se
if (taos->state != TAOS_STATE_IDLE) {
err = -ENODEV;
- dev_dbg(&serio->dev, "TAOS EVM reset failed (state=%d, "
+ dev_err(&serio->dev, "TAOS EVM reset failed (state=%d, "
"pos=%d)\n", taos->state, taos->pos);
goto exit_close;
}
@@ -255,7 +255,7 @@ static int taos_connect(struct serio *se
msecs_to_jiffies(250));
if (taos->state != TAOS_STATE_IDLE) {
err = -ENODEV;
- dev_err(&adapter->dev, "Echo off failed "
+ dev_err(&serio->dev, "TAOS EVM echo off failed "
"(state=%d)\n", taos->state);
goto exit_close;
}
@@ -263,7 +263,7 @@ static int taos_connect(struct serio *se
err = i2c_add_adapter(adapter);
if (err)
goto exit_close;
- dev_dbg(&serio->dev, "Connected to TAOS EVM\n");
+ dev_info(&serio->dev, "Connected to TAOS EVM\n");
taos->client = taos_instantiate_device(adapter);
return 0;
@@ -288,7 +288,7 @@ static void taos_disconnect(struct serio
serio_set_drvdata(serio, NULL);
kfree(taos);
- dev_dbg(&serio->dev, "Disconnected from TAOS EVM\n");
+ dev_info(&serio->dev, "Disconnected from TAOS EVM\n");
}
static struct serio_device_id taos_serio_ids[] = {
--
Jean Delvare
--
To unsubscribe from this list: send the line "unsubscribe linux-i2c" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
