This is an interation of the previous patch set that hopefully adress Ben's comments: we took some runtime PM hooks out and added a refactoring on the tail. Actually the last patch fixing the platform config can be fed into the I2C tree as well, if subsys maintainers are comfortable with it. I won't be changing much stuff in the ux500 in this merge window due to kernel consolidations taking place. Jonas Aberg (1): i2c/i2c-nomadik: add regulator support Linus Walleij (3): i2c/i2c-nomadik: fix speed enumerator i2c/i2c-nomadik: break out single messsage transmission mach-ux500: set proper I2C platform data from MOP500s Rabin Vincent (1): i2c/i2c-nomadik: use pm_runtime API Virupax Sadashivpetimath (8): i2c/i2c-nomadik: make i2c timeout specific per i2c bus i2c/i2c-nomadik: corrrect returned error numbers i2c/i2c-nomadik: correct adapter timeout initialization i2c/i2c-nomadik: print abort cause only on abort tag i2c/i2c-nomadik: add code to retry on timeout failure i2c/i2c-nomadik: change the TX and RX threshold i2c/i2c-nomadik: remove the unnecessary delay i2c/i2c-nomadik: reset the hw after status check srinidhi kasagar (1): i2c/i2c-nomadik: remove the redundant error message arch/arm/mach-ux500/board-mop500.c | 14 +- arch/arm/plat-nomadik/include/plat/i2c.h | 8 +- drivers/i2c/busses/i2c-nomadik.c | 276 ++++++++++++++++++++---------- 3 files changed, 197 insertions(+), 101 deletions(-) -- 1.7.5.1 -- To unsubscribe from this list: send the line "unsubscribe linux-i2c" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
