On Mon, May 09, 2011 at 11:34:37PM +0200, Linus Walleij wrote: > A lot of internal refining of this driver has happened on this > driver inside ST-Ericsson since last kernel cycle. Here are the > accumulated changes. I have NOT squashed any development history > this time, since I was severely beat up about it last time. > > The last patch in the series for mach-ux500 shall go into my ux500 > tree, it is not required for the driver to function, so the rest > of the patches can be applied to the I2C tree without causing any > problems with the platforms using the driver. > > Jonas Aberg (1): > i2c/i2c-nomadik: add regulator support > > Linus Walleij (2): > i2c/i2c-nomadik: fix speed enumerator > mach-ux500: set proper I2C platform data from MOP500s > > Rabin Vincent (1): > i2c/i2c-nomadik: use pm_runtime API > > Virupax Sadashivpetimath (8): > i2c/i2c-nomadik: make i2c timeout specific per i2c bus > i2c/i2c-nomadik: corrrect returned error numbers > i2c/i2c-nomadik: correct adapter timeout initialization > i2c/i2c-nomadik: print abort cause only on abort tag > i2c/i2c-nomadik: add code to retry on timeout failure > i2c/i2c-nomadik: change the TX and RX threshold > i2c/i2c-nomadik: remove the unnecessary delay > i2c/i2c-nomadik: reset the hw after status check > > srinidhi kasagar (1): > i2c/i2c-nomadik: remove the redundant error message > > arch/arm/mach-ux500/board-mop500.c | 14 +- > arch/arm/plat-nomadik/include/plat/i2c.h | 8 +- > drivers/i2c/busses/i2c-nomadik.c | 272 ++++++++++++++++++++---------- > 3 files changed, 194 insertions(+), 100 deletions(-) right, mostly looks fine, just one or two bits that could do with looking at if possible. -- To unsubscribe from this list: send the line "unsubscribe linux-i2c" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
