[PATCH 2/3] i2c: tegra: fix repeated start handling

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Erik Gilling <konkers@xxxxxxxxxxx>

A repeated start should be used for all but the last msg in an xfer.  The
NOSTART flag is for skipping the START frame (addr/rw)

Signed-off-by: Erik Gilling <konkers@xxxxxxxxxxx>
Signed-off-by: Stephen Warren <swarren@xxxxxxxxxx>
---
 drivers/i2c/busses/i2c-tegra.c |    4 ++--
 1 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/i2c/busses/i2c-tegra.c b/drivers/i2c/busses/i2c-tegra.c
index c0b9aa7..6b69b70 100644
--- a/drivers/i2c/busses/i2c-tegra.c
+++ b/drivers/i2c/busses/i2c-tegra.c
@@ -451,12 +451,12 @@ static int tegra_i2c_xfer_msg(struct tegra_i2c_dev *i2c_dev,
 
 	packet_header = msg->addr << I2C_HEADER_SLAVE_ADDR_SHIFT;
 	packet_header |= I2C_HEADER_IE_ENABLE;
+	if (!stop)
+		packet_header |= I2C_HEADER_REPEAT_START;
 	if (msg->flags & I2C_M_TEN)
 		packet_header |= I2C_HEADER_10BIT_ADDR;
 	if (msg->flags & I2C_M_IGNORE_NAK)
 		packet_header |= I2C_HEADER_CONT_ON_NAK;
-	if (msg->flags & I2C_M_NOSTART)
-		packet_header |= I2C_HEADER_REPEAT_START;
 	if (msg->flags & I2C_M_RD)
 		packet_header |= I2C_HEADER_READ;
 	i2c_writel(i2c_dev, packet_header, I2C_TX_FIFO);
-- 
1.7.0.4

--
To unsubscribe from this list: send the line "unsubscribe linux-i2c" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux GPIO]     [Linux SPI]     [Linux Hardward Monitoring]     [LM Sensors]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux