On Thu, Apr 21, 2011 at 07:11:25AM -0400, Arnd Bergmann wrote: > On Wednesday 20 April 2011, Guenter Roeck wrote: > > On Wed, Apr 20, 2011 at 12:44:30PM -0400, Arnd Bergmann wrote: > > > On Tuesday 19 April 2011, Guenter Roeck wrote: > > > > This driver adds support for Si570, Si571, Si598, and Si599 > > > > programmable XO/VCXO. > > > > > > > > Signed-off-by: Guenter Roeck <guenter.roeck@xxxxxxxxxxxx> > > > > > > This needs some more explanation of what the hardware is there for, > > > and why it's unlike everything else that we support in Linux. > > > > > This is a generic configurable clock device. I'll be happy to add > > some text such as "The device can be used for any application requiring > > a static or a dynamically configurable clock, such as serdes clocks". > > Not sure if that would add much value, though. > > > > Regarding "unlike everything else", not sure if that is really correct. > > The DDS chips Jonathan mentioned do get pretty close, and there are > > other drivers providing support for clock chips, though typically more > > dedicated. ics932s401 in misc is one example, and then there are all > > the tuner chips in media/common/tuners/. > > Isn't that what you'd normally call a 'struct clk' then? > Yes, it would be nice to have that as part of the kernel and not architecture specific. > > > If that is true, it should probably not have a user-visible > > > interface, but only an interface that can be used by other > > > kernel drivers. > > > > > Depends. In our case, turns out the devices consuming the clock > > have user mode drivers. Lots of history there, but the chip vendors > > provide those user mode drivers, and the teams responsible for > > integrating the drivers decided to not rewrite it to kernel mode drivers. > > Also, for special purposes such as margining, it is necessary to control > > the clock from userspace. So, for our use case, I need the user-visible > > interface. I _don't_ need the kernel interface, at least not right now, > > which is why I did not add it. > > > > Browsing through the web, it seems the chip is somewhat popular with > > Amateur Radio. No idea if it would ever be controlled for such a purpose > > from Linux, but if so, it would also require a user configurable frequency. > > > > If there is a better place for such a driver than misc, please let me know. > > When you say user mode driver, do you mean as in drivers/uio? (taking Hans > on Cc for these) > > Those already have generic support for memory and interrupt resources, > maybe we can just add a common way to associate a uio device with a struct clk > and provide a sysfs or ioctl interface to set a clock for a given device. > ... and provide the clk infrastructure for x86, which is where I need it. Guenter -- To unsubscribe from this list: send the line "unsubscribe linux-i2c" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
