From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
mxs_reset_block() clears the PIO_QUEUE_MODE bit. So we have
to set it again after a controller reset.
Signed-off-by: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
Signed-off-by: Wolfram Sang <w.sang@xxxxxxxxxxxxxx>
Cc: Ben Dooks <ben-linux@xxxxxxxxx>
---
drivers/i2c/busses/i2c-mxs.c | 4 ++--
1 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/i2c/busses/i2c-mxs.c b/drivers/i2c/busses/i2c-mxs.c
index 8022e23..caf96dc 100644
--- a/drivers/i2c/busses/i2c-mxs.c
+++ b/drivers/i2c/busses/i2c-mxs.c
@@ -118,6 +118,8 @@ static void mxs_i2c_reset(struct mxs_i2c_dev *i2c)
{
mxs_reset_block(i2c->regs);
writel(MXS_I2C_IRQ_MASK << 8, i2c->regs + MXS_I2C_CTRL1_SET);
+ writel(MXS_I2C_QUEUECTRL_PIO_QUEUE_MODE,
+ i2c->regs + MXS_I2C_QUEUECTRL_SET);
}
static void mxs_i2c_pioq_setup_read(struct mxs_i2c_dev *i2c, u8 addr, int len,
@@ -347,8 +349,6 @@ static int __devinit mxs_i2c_probe(struct platform_device *pdev)
/* Do reset to enforce correct startup after pinmuxing */
mxs_i2c_reset(i2c);
- writel(MXS_I2C_QUEUECTRL_PIO_QUEUE_MODE,
- i2c->regs + MXS_I2C_QUEUECTRL_SET);
adap = &i2c->adapter;
strlcpy(adap->name, "MXS I2C adapter", sizeof(adap->name));
--
1.7.2.3
--
To unsubscribe from this list: send the line "unsubscribe linux-i2c" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
