From: Dirk Brandewie <dirk.brandewie@xxxxxxxxx>
Move all register manipulation code into the core, also move register
offset definitions to i2c-designware-core.c since the bus specific
portions of the dirver no longer need/use them.
Signed-off-by: Dirk Brandewie <dirk.brandewie@xxxxxxxxx>
---
drivers/i2c/busses/i2c-designware-core.c | 149 +++++++++++++++++++++++++++
drivers/i2c/busses/i2c-designware-core.h | 105 +------------------
drivers/i2c/busses/i2c-designware-platdrv.c | 6 +-
3 files changed, 158 insertions(+), 102 deletions(-)
diff --git a/drivers/i2c/busses/i2c-designware-core.c b/drivers/i2c/busses/i2c-designware-core.c
index fce72e9..666d71c 100644
--- a/drivers/i2c/busses/i2c-designware-core.c
+++ b/drivers/i2c/busses/i2c-designware-core.c
@@ -33,6 +33,108 @@
#include <linux/io.h>
#include "i2c-designware-core.h"
+/*
+ * Registers offset
+ */
+#define DW_IC_CON 0x0
+#define DW_IC_TAR 0x4
+#define DW_IC_DATA_CMD 0x10
+#define DW_IC_SS_SCL_HCNT 0x14
+#define DW_IC_SS_SCL_LCNT 0x18
+#define DW_IC_FS_SCL_HCNT 0x1c
+#define DW_IC_FS_SCL_LCNT 0x20
+#define DW_IC_INTR_STAT 0x2c
+#define DW_IC_INTR_MASK 0x30
+#define DW_IC_RAW_INTR_STAT 0x34
+#define DW_IC_RX_TL 0x38
+#define DW_IC_TX_TL 0x3c
+#define DW_IC_CLR_INTR 0x40
+#define DW_IC_CLR_RX_UNDER 0x44
+#define DW_IC_CLR_RX_OVER 0x48
+#define DW_IC_CLR_TX_OVER 0x4c
+#define DW_IC_CLR_RD_REQ 0x50
+#define DW_IC_CLR_TX_ABRT 0x54
+#define DW_IC_CLR_RX_DONE 0x58
+#define DW_IC_CLR_ACTIVITY 0x5c
+#define DW_IC_CLR_STOP_DET 0x60
+#define DW_IC_CLR_START_DET 0x64
+#define DW_IC_CLR_GEN_CALL 0x68
+#define DW_IC_ENABLE 0x6c
+#define DW_IC_STATUS 0x70
+#define DW_IC_TXFLR 0x74
+#define DW_IC_RXFLR 0x78
+#define DW_IC_TX_ABRT_SOURCE 0x80
+#define DW_IC_COMP_PARAM_1 0xf4
+#define DW_IC_COMP_TYPE 0xfc
+#define DW_IC_COMP_TYPE_VALUE 0x44570140
+
+#define DW_IC_INTR_RX_UNDER 0x001
+#define DW_IC_INTR_RX_OVER 0x002
+#define DW_IC_INTR_RX_FULL 0x004
+#define DW_IC_INTR_TX_OVER 0x008
+#define DW_IC_INTR_TX_EMPTY 0x010
+#define DW_IC_INTR_RD_REQ 0x020
+#define DW_IC_INTR_TX_ABRT 0x040
+#define DW_IC_INTR_RX_DONE 0x080
+#define DW_IC_INTR_ACTIVITY 0x100
+#define DW_IC_INTR_STOP_DET 0x200
+#define DW_IC_INTR_START_DET 0x400
+#define DW_IC_INTR_GEN_CALL 0x800
+
+#define DW_IC_INTR_DEFAULT_MASK (DW_IC_INTR_RX_FULL | \
+ DW_IC_INTR_TX_EMPTY | \
+ DW_IC_INTR_TX_ABRT | \
+ DW_IC_INTR_STOP_DET)
+
+#define DW_IC_STATUS_ACTIVITY 0x1
+
+#define DW_IC_ERR_TX_ABRT 0x1
+
+/*
+ * status codes
+ */
+#define STATUS_IDLE 0x0
+#define STATUS_WRITE_IN_PROGRESS 0x1
+#define STATUS_READ_IN_PROGRESS 0x2
+
+#define TIMEOUT 20 /* ms */
+
+/*
+ * hardware abort codes from the DW_IC_TX_ABRT_SOURCE register
+ *
+ * only expected abort codes are listed here
+ * refer to the datasheet for the full list
+ */
+#define ABRT_7B_ADDR_NOACK 0
+#define ABRT_10ADDR1_NOACK 1
+#define ABRT_10ADDR2_NOACK 2
+#define ABRT_TXDATA_NOACK 3
+#define ABRT_GCALL_NOACK 4
+#define ABRT_GCALL_READ 5
+#define ABRT_SBYTE_ACKDET 7
+#define ABRT_SBYTE_NORSTRT 9
+#define ABRT_10B_RD_NORSTRT 10
+#define ABRT_MASTER_DIS 11
+#define ARB_LOST 12
+
+#define DW_IC_TX_ABRT_7B_ADDR_NOACK (1UL << ABRT_7B_ADDR_NOACK)
+#define DW_IC_TX_ABRT_10ADDR1_NOACK (1UL << ABRT_10ADDR1_NOACK)
+#define DW_IC_TX_ABRT_10ADDR2_NOACK (1UL << ABRT_10ADDR2_NOACK)
+#define DW_IC_TX_ABRT_TXDATA_NOACK (1UL << ABRT_TXDATA_NOACK)
+#define DW_IC_TX_ABRT_GCALL_NOACK (1UL << ABRT_GCALL_NOACK)
+#define DW_IC_TX_ABRT_GCALL_READ (1UL << ABRT_GCALL_READ)
+#define DW_IC_TX_ABRT_SBYTE_ACKDET (1UL << ABRT_SBYTE_ACKDET)
+#define DW_IC_TX_ABRT_SBYTE_NORSTRT (1UL << ABRT_SBYTE_NORSTRT)
+#define DW_IC_TX_ABRT_10B_RD_NORSTRT (1UL << ABRT_10B_RD_NORSTRT)
+#define DW_IC_TX_ABRT_MASTER_DIS (1UL << ABRT_MASTER_DIS)
+#define DW_IC_TX_ARB_LOST (1UL << ARB_LOST)
+
+#define DW_IC_TX_ABRT_NOACK (DW_IC_TX_ABRT_7B_ADDR_NOACK | \
+ DW_IC_TX_ABRT_10ADDR1_NOACK | \
+ DW_IC_TX_ABRT_10ADDR2_NOACK | \
+ DW_IC_TX_ABRT_TXDATA_NOACK | \
+ DW_IC_TX_ABRT_GCALL_NOACK)
+
static char *abort_sources[] = {
[ABRT_7B_ADDR_NOACK] =
"slave address not acknowledged (7bit mode)",
@@ -562,3 +664,50 @@ tx_aborted:
return IRQ_HANDLED;
}
+void i2c_dw_enable(struct dw_i2c_dev *dev)
+{
+ /* Enable the adapter */
+ dw_writel(dev, 1, DW_IC_ENABLE);
+}
+
+
+void i2c_dw_disable(struct dw_i2c_dev *dev)
+{
+ int ret;
+
+ /*
+ * Disabling DW_apb_i2c
+ *
+ * The IC_ENABLE register allows software to immediately shut down
+ * the DW_apb_i2c hardware, preventing its further participation in
+ * an I2C subsystem. The I2C protocol, however, does not allow
+ * transfers to be abruptly stopped, it's necessary for software to
+ * manage the correct shutdown of DW_apb_i2c, ensuring no data loss
+ * or bus lockup occurs.
+ */
+ ret = i2c_dw_wait_bus_not_busy(dev);
+ if (ret < 0)
+ BUG();
+
+ /* Disable controller */
+ dw_writel(dev, 0, DW_IC_ENABLE);
+
+ /* Disable all interupts */
+ dw_writel(dev, 0, DW_IC_INTR_MASK);
+ dw_readl(dev, DW_IC_CLR_INTR);
+}
+
+void i2c_dw_clear_int(struct dw_i2c_dev *dev)
+{
+ dw_readl(dev, DW_IC_CLR_INTR);
+}
+
+void i2c_dw_disable_int(struct dw_i2c_dev *dev)
+{
+ dw_writel(dev, 0, DW_IC_INTR_MASK);
+}
+
+u32 i2c_dw_read_comp_param(struct dw_i2c_dev *dev)
+{
+ return dw_readl(dev, DW_IC_COMP_PARAM_1);
+}
diff --git a/drivers/i2c/busses/i2c-designware-core.h b/drivers/i2c/busses/i2c-designware-core.h
index 2938621..697f12c 100644
--- a/drivers/i2c/busses/i2c-designware-core.h
+++ b/drivers/i2c/busses/i2c-designware-core.h
@@ -26,40 +26,6 @@
*
*/
-/*
- * Registers offset
- */
-#define DW_IC_CON 0x0
-#define DW_IC_TAR 0x4
-#define DW_IC_DATA_CMD 0x10
-#define DW_IC_SS_SCL_HCNT 0x14
-#define DW_IC_SS_SCL_LCNT 0x18
-#define DW_IC_FS_SCL_HCNT 0x1c
-#define DW_IC_FS_SCL_LCNT 0x20
-#define DW_IC_INTR_STAT 0x2c
-#define DW_IC_INTR_MASK 0x30
-#define DW_IC_RAW_INTR_STAT 0x34
-#define DW_IC_RX_TL 0x38
-#define DW_IC_TX_TL 0x3c
-#define DW_IC_CLR_INTR 0x40
-#define DW_IC_CLR_RX_UNDER 0x44
-#define DW_IC_CLR_RX_OVER 0x48
-#define DW_IC_CLR_TX_OVER 0x4c
-#define DW_IC_CLR_RD_REQ 0x50
-#define DW_IC_CLR_TX_ABRT 0x54
-#define DW_IC_CLR_RX_DONE 0x58
-#define DW_IC_CLR_ACTIVITY 0x5c
-#define DW_IC_CLR_STOP_DET 0x60
-#define DW_IC_CLR_START_DET 0x64
-#define DW_IC_CLR_GEN_CALL 0x68
-#define DW_IC_ENABLE 0x6c
-#define DW_IC_STATUS 0x70
-#define DW_IC_TXFLR 0x74
-#define DW_IC_RXFLR 0x78
-#define DW_IC_TX_ABRT_SOURCE 0x80
-#define DW_IC_COMP_PARAM_1 0xf4
-#define DW_IC_COMP_TYPE 0xfc
-#define DW_IC_COMP_TYPE_VALUE 0x44570140
#define DW_IC_CON_MASTER 0x1
#define DW_IC_CON_SPEED_STD 0x2
@@ -68,72 +34,7 @@
#define DW_IC_CON_RESTART_EN 0x20
#define DW_IC_CON_SLAVE_DISABLE 0x40
-#define DW_IC_INTR_RX_UNDER 0x001
-#define DW_IC_INTR_RX_OVER 0x002
-#define DW_IC_INTR_RX_FULL 0x004
-#define DW_IC_INTR_TX_OVER 0x008
-#define DW_IC_INTR_TX_EMPTY 0x010
-#define DW_IC_INTR_RD_REQ 0x020
-#define DW_IC_INTR_TX_ABRT 0x040
-#define DW_IC_INTR_RX_DONE 0x080
-#define DW_IC_INTR_ACTIVITY 0x100
-#define DW_IC_INTR_STOP_DET 0x200
-#define DW_IC_INTR_START_DET 0x400
-#define DW_IC_INTR_GEN_CALL 0x800
-
-#define DW_IC_INTR_DEFAULT_MASK (DW_IC_INTR_RX_FULL | \
- DW_IC_INTR_TX_EMPTY | \
- DW_IC_INTR_TX_ABRT | \
- DW_IC_INTR_STOP_DET)
-
-#define DW_IC_STATUS_ACTIVITY 0x1
-
-#define DW_IC_ERR_TX_ABRT 0x1
-
-/*
- * status codes
- */
-#define STATUS_IDLE 0x0
-#define STATUS_WRITE_IN_PROGRESS 0x1
-#define STATUS_READ_IN_PROGRESS 0x2
-#define TIMEOUT 20 /* ms */
-
-/*
- * hardware abort codes from the DW_IC_TX_ABRT_SOURCE register
- *
- * only expected abort codes are listed here
- * refer to the datasheet for the full list
- */
-#define ABRT_7B_ADDR_NOACK 0
-#define ABRT_10ADDR1_NOACK 1
-#define ABRT_10ADDR2_NOACK 2
-#define ABRT_TXDATA_NOACK 3
-#define ABRT_GCALL_NOACK 4
-#define ABRT_GCALL_READ 5
-#define ABRT_SBYTE_ACKDET 7
-#define ABRT_SBYTE_NORSTRT 9
-#define ABRT_10B_RD_NORSTRT 10
-#define ABRT_MASTER_DIS 11
-#define ARB_LOST 12
-
-#define DW_IC_TX_ABRT_7B_ADDR_NOACK (1UL << ABRT_7B_ADDR_NOACK)
-#define DW_IC_TX_ABRT_10ADDR1_NOACK (1UL << ABRT_10ADDR1_NOACK)
-#define DW_IC_TX_ABRT_10ADDR2_NOACK (1UL << ABRT_10ADDR2_NOACK)
-#define DW_IC_TX_ABRT_TXDATA_NOACK (1UL << ABRT_TXDATA_NOACK)
-#define DW_IC_TX_ABRT_GCALL_NOACK (1UL << ABRT_GCALL_NOACK)
-#define DW_IC_TX_ABRT_GCALL_READ (1UL << ABRT_GCALL_READ)
-#define DW_IC_TX_ABRT_SBYTE_ACKDET (1UL << ABRT_SBYTE_ACKDET)
-#define DW_IC_TX_ABRT_SBYTE_NORSTRT (1UL << ABRT_SBYTE_NORSTRT)
-#define DW_IC_TX_ABRT_10B_RD_NORSTRT (1UL << ABRT_10B_RD_NORSTRT)
-#define DW_IC_TX_ABRT_MASTER_DIS (1UL << ABRT_MASTER_DIS)
-#define DW_IC_TX_ARB_LOST (1UL << ARB_LOST)
-
-#define DW_IC_TX_ABRT_NOACK (DW_IC_TX_ABRT_7B_ADDR_NOACK | \
- DW_IC_TX_ABRT_10ADDR1_NOACK | \
- DW_IC_TX_ABRT_10ADDR2_NOACK | \
- DW_IC_TX_ABRT_TXDATA_NOACK | \
- DW_IC_TX_ABRT_GCALL_NOACK)
/**
* struct dw_i2c_dev - private i2c-designware data
* @dev: driver model device node
@@ -195,3 +96,9 @@ extern int i2c_dw_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[],
int num);
extern u32 i2c_dw_func(struct i2c_adapter *adap);
extern irqreturn_t i2c_dw_isr(int this_irq, void *dev_id);
+extern void i2c_dw_enable(struct dw_i2c_dev *dev);
+extern void i2c_dw_disable(struct dw_i2c_dev *dev);
+extern void i2c_dw_clear_int(struct dw_i2c_dev *dev);
+extern void i2c_dw_disable_int(struct dw_i2c_dev *dev);
+extern u32 i2c_dw_read_comp_param(struct dw_i2c_dev *dev);
+
diff --git a/drivers/i2c/busses/i2c-designware-platdrv.c b/drivers/i2c/busses/i2c-designware-platdrv.c
index 1258cae..2d3657a 100644
--- a/drivers/i2c/busses/i2c-designware-platdrv.c
+++ b/drivers/i2c/busses/i2c-designware-platdrv.c
@@ -113,7 +113,7 @@ static int __devinit dw_i2c_probe(struct platform_device *pdev)
goto err_unuse_clocks;
}
{
- u32 param1 = dw_readl(dev, DW_IC_COMP_PARAM_1);
+ u32 param1 = i2c_dw_read_comp_param(dev);
dev->tx_fifo_depth = ((param1 >> 16) & 0xff) + 1;
dev->rx_fifo_depth = ((param1 >> 8) & 0xff) + 1;
@@ -122,7 +122,7 @@ static int __devinit dw_i2c_probe(struct platform_device *pdev)
if (r)
goto err_iounmap;
- dw_writel(dev, 0, DW_IC_INTR_MASK); /* disable IRQ */
+ i2c_dw_disable_int(dev);
r = request_irq(dev->irq, i2c_dw_isr, IRQF_DISABLED, pdev->name, dev);
if (r) {
dev_err(&pdev->dev, "failure requesting irq %i\n", dev->irq);
@@ -178,7 +178,7 @@ static int __devexit dw_i2c_remove(struct platform_device *pdev)
clk_put(dev->clk);
dev->clk = NULL;
- dw_writel(dev, 0, DW_IC_ENABLE);
+ i2c_dw_disable(dev);
free_irq(dev->irq, dev);
kfree(dev);
--
1.7.3.4
--
To unsubscribe from this list: send the line "unsubscribe linux-i2c" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
