Re: [PATCH 1/1] iio: light: Adding driver for ISL29018 ALS

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 10/01/10 01:23, rklein@xxxxxxxxxx wrote:
> From: Rhyland Klein <rklein@xxxxxxxxxx>
Hi Rhyland,

please cc linux-iio@xxxxxxxxxxxxxxx for IIO drivers (I've added it here).
As a heads up to IIO people, this driver introduces a few new
attributes that need pinning down. I've also cc'd Dongguen as he
proposed a driver for a similar part a few weeks back. (speaking of
which, is there any reason that hasn't gone to Greg as yet? The
remaining comments were pretty minor.)

Nice clean driver. Most of my comments are to do with
the userspace interfaces. Sorry if I appear rather picky,
but remember I am trying to enforce consistent interfaces
across a range of extremely varied sensors.  As with nearly every
driver at the moment, yours has a few cases we haven't seen before.

Now, as IIO is in staging, we are still fairly lax about what needs
to be done before a merge.  Hence you are welcome to send this on
to Greg as is and abi cleanups can occur after that.  However,
if you are willing there are a few things I would definitely like
cleaned up or clarified before merging.  These are all pretty trivial.

* The proximity_scheme attribute - this is a classic magic number
  attribute.  Please rename it so a user can find out what it is doing
  without reading the datasheet. The binary input is fine given there
  are only two options (otherwise I'd insist on informative strings
  inside the file!)

* add _input to all attributes in SI units and if they are in any form
  of raw unit, _raw. 

* rename the infrared and proximity attributes as per current drivers.

* not all resolutions are supported, so even ignoring the fact that I'd
  prefer a _type attribute, I definitely want a way of userspace finding
  out what resolutions are allowed! So if you keep your current naming,
  a resolution_available attribute is a must.

There is also a slight excess of debugging in here for a driver being
merged, but that's personal taste!

Thanks,

Jonathan
> 
> Adding support for the ISL 29018 ambient light and proximity sensor.
> 
> Signed-off-by: Rhyland Klein <rklein@xxxxxxxxxx>
> ---
>  drivers/staging/iio/light/Kconfig    |   11 +
>  drivers/staging/iio/light/Makefile   |    1 +
>  drivers/staging/iio/light/isl29018.c |  565 ++++++++++++++++++++++++++++++++++
>  3 files changed, 577 insertions(+), 0 deletions(-)
>  create mode 100755 drivers/staging/iio/light/isl29018.c
> 
> diff --git a/drivers/staging/iio/light/Kconfig b/drivers/staging/iio/light/Kconfig
> index 80cb6e5..09113e4 100644
> --- a/drivers/staging/iio/light/Kconfig
> +++ b/drivers/staging/iio/light/Kconfig
> @@ -13,3 +13,14 @@ config SENSORS_TSL2563
>  	 This driver can also be built as a module.  If so, the module
>  	 will be called tsl2563.
>  
> +config SENSORS_ISL29018
> +        tristate "ISL 29018 light and proximity sensor"
> +        depends on I2C
> +        default n
> +        help
> +         If you say yes here you get support for ambient light sensing and
> +         proximity ir sensing from Intersil ISL29018.
worth ir->infrared here?  Would make the help more consistent.
> +         This driver will provide the measurements of ambient light intensity
> +         in lux, proximity infrared sensing and normal infrared sensing.
> +         Data from sensor is accessible via sysfs.
> +
> diff --git a/drivers/staging/iio/light/Makefile b/drivers/staging/iio/light/Makefile
> index 30f3300..9142c0e 100644
> --- a/drivers/staging/iio/light/Makefile
> +++ b/drivers/staging/iio/light/Makefile
> @@ -3,3 +3,4 @@
>  #
>  
>  obj-$(CONFIG_SENSORS_TSL2563)	+= tsl2563.o
> +obj-$(CONFIG_SENSORS_ISL29018)	+= isl29018.o
> diff --git a/drivers/staging/iio/light/isl29018.c b/drivers/staging/iio/light/isl29018.c
> new file mode 100755
> index 0000000..453a419
> --- /dev/null
> +++ b/drivers/staging/iio/light/isl29018.c
> @@ -0,0 +1,565 @@
> +/*
> + * A iio driver for the light sensor ISL 29018.
iio -> IIO (again for consistency - either option is fine with me!)
> + *
> + * IIO driver for monitoring ambient light intensity in luxi, proximity
> + * sensing and infrared sensing.
> + *
> + * Copyright (c) 2010, NVIDIA Corporation.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful, but WITHOUT
> + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
> + * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
> + * more details.
> + *
> + * You should have received a copy of the GNU General Public License along
> + * with this program; if not, write to the Free Software Foundation, Inc.,
> + * 51 Franklin Street, Fifth Floor, Boston, MA	02110-1301, USA.
> + */
> +
> +#include <linux/module.h>
> +#include <linux/i2c.h>
> +#include <linux/err.h>
> +#include <linux/mutex.h>
> +#include <linux/delay.h>
> +#include <linux/slab.h>
> +#include "../iio.h"
> +
> +#define CONVERSION_TIME_MS		100
> +
> +#define ISL29018_REG_ADD_COMMAND1	0x00
> +#define COMMMAND1_OPMODE_SHIFT		5
> +#define COMMMAND1_OPMODE_MASK		(7 << COMMMAND1_OPMODE_SHIFT)
> +#define COMMMAND1_OPMODE_POWER_DOWN	0
> +#define COMMMAND1_OPMODE_ALS_ONCE	1
> +#define COMMMAND1_OPMODE_IR_ONCE	2
> +#define COMMMAND1_OPMODE_PROX_ONCE	3
> +
> +#define ISL29018_REG_ADD_COMMANDII	0x01
> +#define COMMANDII_RESOLUTION_SHIFT	2
> +#define COMMANDII_RESOLUTION_MASK	(0x3 << COMMANDII_RESOLUTION_SHIFT)
> +
> +#define COMMANDII_RANGE_SHIFT		0
> +#define COMMANDII_RANGE_MASK		(0x3 << COMMANDII_RANGE_SHIFT)
> +
> +#define COMMANDII_SCHEME_SHIFT		7
> +#define COMMANDII_SCHEME_MASK		(0x1 << COMMANDII_SCHEME_SHIFT)
> +
> +#define ISL29018_REG_ADD_DATA_LSB	0x02
> +#define ISL29018_REG_ADD_DATA_MSB	0x03
> +#define ISL29018_MAX_REGS		ISL29018_REG_ADD_DATA_MSB
> +
> +struct isl29018_chip {
> +	struct iio_dev		*indio_dev;
> +	struct i2c_client	*client;
> +	struct mutex		lock;
> +	unsigned int		range;
> +	unsigned int		adc_bit;
> +	int			prox_scheme;
> +	u8			reg_cache[ISL29018_MAX_REGS];
> +};
> +
> +static int isl29018_write_data(struct i2c_client *client, u8 reg,
> +			u8 val, u8 mask, u8 shift)
> +{
> +	u8 regval;
> +	int ret = 0;
> +	struct isl29018_chip *chip = i2c_get_clientdata(client);
> +
> +	regval = chip->reg_cache[reg];
> +	regval &= ~mask;
> +	regval |= val << shift;
> +
> +	ret = i2c_smbus_write_byte_data(client, reg, regval);
> +	if (ret) {
> +		dev_err(&client->dev, "Write to device fails status %x\n", ret);
> +		return ret;
> +	}
> +	chip->reg_cache[reg] = regval;
> +
> +	return 0;
> +}
> +
> +static int isl29018_set_range(struct i2c_client *client, unsigned long range,
> +		unsigned int *new_range)
> +{
> +	unsigned long supp_ranges[] = {1000, 4000, 16000, 64000};
> +	int i;
> +
> +	for (i = 0; i < ARRAY_SIZE(supp_ranges); ++i) {
> +		if (range <= supp_ranges[i]) {
> +			*new_range = (unsigned int)supp_ranges[i];
> +			break;
> +		}
> +	}
> +
> +	if (i >= ARRAY_SIZE(supp_ranges))
> +		return -EINVAL;
> +
> +	return isl29018_write_data(client, ISL29018_REG_ADD_COMMANDII,
> +			i, COMMANDII_RANGE_MASK, COMMANDII_RANGE_SHIFT);
> +}
> +
> +static int isl29018_set_resolution(struct i2c_client *client,
> +			unsigned long adcbit, unsigned int *conf_adc_bit)
> +{
> +	unsigned long supp_adcbit[] = {16, 12, 8, 4};
> +	int i;
> +
> +	for (i = 0; i < ARRAY_SIZE(supp_adcbit); ++i) {
> +		if (adcbit >= supp_adcbit[i]) {
> +			*conf_adc_bit = (unsigned int)supp_adcbit[i];
> +			break;
> +		}
> +	}
> +
> +	if (i >= ARRAY_SIZE(supp_adcbit))
> +		return -EINVAL;
> +
> +	return isl29018_write_data(client, ISL29018_REG_ADD_COMMANDII,
> +			i, COMMANDII_RESOLUTION_MASK,
> +			COMMANDII_RESOLUTION_SHIFT);
> +}
> +
> +static int isl29018_read_sensor_input(struct i2c_client *client, int mode)
> +{
> +	int status;
> +	int lsb;
> +	int msb;
> +
> +	/* Set mode */
> +	status = isl29018_write_data(client, ISL29018_REG_ADD_COMMAND1,
> +			mode, COMMMAND1_OPMODE_MASK, COMMMAND1_OPMODE_SHIFT);
> +	if (status) {
> +		dev_err(&client->dev, "Error in setting operating mode\n");
> +		return status;
> +	}
> +	msleep(CONVERSION_TIME_MS);
> +	lsb = i2c_smbus_read_byte_data(client, ISL29018_REG_ADD_DATA_LSB);
> +	if (lsb < 0) {
> +		dev_err(&client->dev, "Error in reading LSB DATA\n");
> +		return lsb;
> +	}
> +
> +	msb = i2c_smbus_read_byte_data(client, ISL29018_REG_ADD_DATA_MSB);
> +	if (msb < 0) {
> +		dev_err(&client->dev, "Error in reading MSB DATA\n");
> +		return msb;
> +	}
> +	dev_vdbg(&client->dev, "MSB 0x%x and LSB 0x%x\n", msb, lsb);
> +
> +	return (msb << 8) | lsb;
> +}
> +
> +static int isl29018_read_lux(struct i2c_client *client, int *lux)
> +{
> +	int lux_data;
> +	struct isl29018_chip *chip = i2c_get_clientdata(client);
> +
> +	lux_data = isl29018_read_sensor_input(client,
> +				COMMMAND1_OPMODE_ALS_ONCE);
> +
> +	if (lux_data < 0)
> +		return lux_data;
> +
> +	*lux = (lux_data * chip->range) >> chip->adc_bit;
> +
> +	return 0;
> +}
> +
> +static int isl29018_read_ir(struct i2c_client *client, int *ir)
> +{
> +	int ir_data;
> +
> +	ir_data = isl29018_read_sensor_input(client, COMMMAND1_OPMODE_IR_ONCE);
> +
> +	if (ir_data < 0)
> +		return ir_data;
> +
> +	*ir = ir_data;
> +
> +	return 0;
> +}
> +
> +static int isl29018_read_proximity_ir(struct i2c_client *client, int scheme,
> +		int *near_ir)
> +{
> +	int status;
> +	int prox_data = -1;
> +	int ir_data = -1;
> +
> +	/* Do proximity sensing with required scheme */
> +	status = isl29018_write_data(client, ISL29018_REG_ADD_COMMANDII,
> +			scheme, COMMANDII_SCHEME_MASK, COMMANDII_SCHEME_SHIFT);
> +	if (status) {
> +		dev_err(&client->dev, "Error in setting operating mode\n");
> +		return status;
> +	}
> +
> +	prox_data = isl29018_read_sensor_input(client,
> +					COMMMAND1_OPMODE_PROX_ONCE);
> +	if (prox_data < 0)
> +		return prox_data;
> +
> +	if (scheme == 1) {
> +		*near_ir = prox_data;
> +		return 0;
> +	}
> +
> +	ir_data = isl29018_read_sensor_input(client,
> +				COMMMAND1_OPMODE_IR_ONCE);
> +
> +	if (ir_data < 0)
> +		return ir_data;
> +
> +	if (prox_data >= ir_data)
> +		*near_ir = prox_data - ir_data;
> +	else
> +		*near_ir = 0;
> +
> +	return 0;
> +}
> +
> +static ssize_t get_sensor_data(struct device *dev, char *buf, int mode)
> +{
> +	struct iio_dev *indio_dev = dev_get_drvdata(dev);
> +	struct isl29018_chip *chip = indio_dev->dev_data;
> +	struct i2c_client *client = chip->client;
> +	int value = 0;
> +	int status;
> +
> +	mutex_lock(&chip->lock);
> +	switch (mode) {
> +	case COMMMAND1_OPMODE_PROX_ONCE:
> +		status = isl29018_read_proximity_ir(client,
> +				chip->prox_scheme, &value);
> +		break;
> +
> +	case COMMMAND1_OPMODE_ALS_ONCE:
> +		status = isl29018_read_lux(client, &value);
> +		break;
> +
> +	case COMMMAND1_OPMODE_IR_ONCE:
> +		status = isl29018_read_ir(client, &value);
> +		break;
> +
> +	default:
> +		dev_err(&client->dev, "Mode %d is not supported\n", mode);
> +		mutex_unlock(&chip->lock);
> +		return -EBUSY;
> +	}
> +	if (status < 0) {
> +		dev_err(&client->dev, "Error in Reading data");
> +		mutex_unlock(&chip->lock);
> +		return status;
> +	}
> +
> +	mutex_unlock(&chip->lock);
> +
> +	return sprintf(buf, "%d\n", value);
> +}
> +
> +/* Sysfs interface */
> +/* range */
> +static ssize_t show_range(struct device *dev,
> +			struct device_attribute *attr, char *buf)
> +{
> +	struct iio_dev *indio_dev = dev_get_drvdata(dev);
> +	struct isl29018_chip *chip = indio_dev->dev_data;
> +
> +	dev_vdbg(dev, "%s()\n", __func__);
> +
> +	return sprintf(buf, "%u\n", chip->range);
> +}
> +
> +static ssize_t store_range(struct device *dev,
> +		struct device_attribute *attr, const char *buf, size_t count)
> +{
> +	struct iio_dev *indio_dev = dev_get_drvdata(dev);
> +	struct isl29018_chip *chip = indio_dev->dev_data;
> +	struct i2c_client *client = chip->client;
> +	int status;
> +	unsigned long lval;
> +	unsigned int new_range;
> +
> +	dev_vdbg(dev, "%s()\n", __func__);
> +
> +	if (strict_strtoul(buf, 10, &lval))
> +		return -EINVAL;
> +
> +	if (!(lval == 1000UL || lval == 4000UL ||
> +			lval == 16000UL || lval == 64000UL)) {
> +		dev_err(dev, "The range is not supported\n");
> +		return -EINVAL;
> +	}
> +
> +	mutex_lock(&chip->lock);
> +	status = isl29018_set_range(client, lval, &new_range);
> +	if (status < 0) {
> +		mutex_unlock(&chip->lock);
> +		dev_err(dev, "Error in setting max range\n");
> +		return status;
> +	}
> +	chip->range = new_range;
> +	mutex_unlock(&chip->lock);
> +
> +	return count;
> +}
> +
> +/* resolution */
> +static ssize_t show_resolution(struct device *dev,
> +			struct device_attribute *attr, char *buf)
> +{
> +	struct iio_dev *indio_dev = dev_get_drvdata(dev);
> +	struct isl29018_chip *chip = indio_dev->dev_data;
> +
> +	dev_vdbg(dev, "%s()\n", __func__);
> +
> +	return sprintf(buf, "%u\n", chip->adc_bit);
> +}
> +
> +static ssize_t store_resolution(struct device *dev,
> +		struct device_attribute *attr, const char *buf, size_t count)
> +{
> +	struct iio_dev *indio_dev = dev_get_drvdata(dev);
> +	struct isl29018_chip *chip = indio_dev->dev_data;
> +	struct i2c_client *client = chip->client;
> +	int status;
> +	unsigned long lval;
> +	unsigned int new_adc_bit;
> +
> +	dev_vdbg(dev, "%s()\n", __func__);
> +
> +	if (strict_strtoul(buf, 10, &lval))
> +		return -EINVAL;
> +	if (!(lval == 4 || lval == 8 || lval == 12 || lval == 16)) {
> +		dev_err(dev, "The resolution is not supported\n");
> +		return -EINVAL;
> +	}
> +
> +	mutex_lock(&chip->lock);
> +	status = isl29018_set_resolution(client, lval, &new_adc_bit);
> +	if (status < 0) {
> +		mutex_unlock(&chip->lock);
> +		dev_err(dev, "Error in setting resolution\n");
> +		return status;
> +	}
> +	chip->adc_bit = new_adc_bit;
> +	mutex_unlock(&chip->lock);
> +
> +	return count;
> +}
> +

This attribute is dealing in magic numbers.  Based on a bit of
datasheet browsing, I think what we have is a choice between on
chip removal of background ir (ambient) and doing it in the driver?

   So the question is, is this a common trick and hence in need
of a nice general interface or is this very chip specific and
   hence you can do what you like?  Either way you need to name
the attribute in a more obvious fashion. Perhaps

proximity_on_chip_ambient_infrared_supression?
Never skimp on characters in a name if it makes things clearer.

> +/* proximity scheme */
> +static ssize_t show_prox_scheme(struct device *dev,
> +			struct device_attribute *attr, char *buf)
> +{
> +	struct iio_dev *indio_dev = dev_get_drvdata(dev);
> +	struct isl29018_chip *chip = indio_dev->dev_data;
> +
> +	dev_vdbg(dev, "%s()\n", __func__);
> +
> +	return sprintf(buf, "%d\n", chip->prox_scheme);
> +}
> +
> +static ssize_t store_prox_scheme(struct device *dev,
> +		struct device_attribute *attr, const char *buf, size_t count)
> +{
> +	struct iio_dev *indio_dev = dev_get_drvdata(dev);
> +	struct isl29018_chip *chip = indio_dev->dev_data;
> +	unsigned long lval;
> +
> +	dev_vdbg(dev, "%s()\n", __func__);
> +
> +	if (strict_strtoul(buf, 10, &lval))
> +		return -EINVAL;
> +	if (!(lval == 0UL || lval == 1UL)) {
> +		dev_err(dev, "The scheme is not supported\n");
> +		return -EINVAL;
> +	}
> +
> +	mutex_lock(&chip->lock);
> +	chip->prox_scheme = (int)lval;
> +	mutex_unlock(&chip->lock);
> +
> +	return count;
> +}
> +
> +/* Read lux */
> +static ssize_t show_lux(struct device *dev,
> +		struct device_attribute *devattr, char *buf)
> +{
> +	return get_sensor_data(dev, buf, COMMMAND1_OPMODE_ALS_ONCE);
> +}
> +
> +/* Read ir */
> +static ssize_t show_ir(struct device *dev,
> +		struct device_attribute *devattr, char *buf)
> +{
> +	return get_sensor_data(dev, buf, COMMMAND1_OPMODE_IR_ONCE);
> +}
> +
> +/* Read nearest ir */
> +static ssize_t show_proxim_ir(struct device *dev,
> +		struct device_attribute *devattr, char *buf)
> +{
> +	return get_sensor_data(dev, buf, COMMMAND1_OPMODE_PROX_ONCE);
> +}
> +
> +/* Read name */
> +static ssize_t show_name(struct device *dev,
> +		struct device_attribute *attr, char *buf)
> +{
> +	struct iio_dev *indio_dev = dev_get_drvdata(dev);
> +	struct isl29018_chip *chip = indio_dev->dev_data;
> +
> +	return sprintf(buf, "%s\n", chip->client->name);
> +}
> +
> +static IIO_DEVICE_ATTR(range, S_IRUGO | S_IWUSR, show_range, store_range, 0);
> +static IIO_DEVICE_ATTR(resolution, S_IRUGO | S_IWUSR,
> +					show_resolution, store_resolution, 0);
> +static IIO_DEVICE_ATTR(proximity_scheme, S_IRUGO | S_IWUSR,
> +					show_prox_scheme, store_prox_scheme, 0);
> +static IIO_DEVICE_ATTR(lux, S_IRUGO, show_lux, NULL, 0);
> +static IIO_DEVICE_ATTR(ir, S_IRUGO, show_ir, NULL, 0);
> +static IIO_DEVICE_ATTR(proxim_ir, S_IRUGO, show_proxim_ir, NULL, 0);
> +static IIO_DEVICE_ATTR(name, S_IRUGO, show_name, NULL, 0);
> +
> +static struct attribute *isl29018_attributes[] = {
> +	&iio_dev_attr_name.dev_attr.attr,

Range of what?  Normally we go with a scale parameter in iio rather
than a range, but I might be persuaded that this is more useful here...
This is a little awkward to handle as the range is actually sensor
dependent (ambient or infrared).
> +	&iio_dev_attr_range.dev_attr.attr,
> +	&iio_dev_attr_resolution.dev_attr.attr,
This is the first driver to support multiple adc resolutions without
an attendant hardware ring buffer, which means we haven't covered this
case before.  We do have _type attributes (documented in sysfs-bus-iio)
that would almost do the job but clearly the alignment information is
irrelevant in this case, but here it applies to all channels (and they
aren't of a consistent type). Perhaps we could introduce a magic channel
description? So we could have?

all_type -> u4 or u8 or u12 or u16

and all_type_available to say what is possible "u4 u8 u12 u16"?

I'm open to suggestions here, but resolution is a bit too vague.
Resolution of what?  It may be obvious for this driver, but we have
numerous sensors with different resultions on different channels.

> +	&iio_dev_attr_proximity_scheme.dev_attr.attr,
Comments on this one above.
> +	&iio_dev_attr_lux.dev_attr.attr,
Oops, for some reason the naming of light parameters is not currently in
the abi documentation.
Currently ambient light measurements are called illuminance0.  The reason
is for this is that it isn't sensible to consistently name parameters
after the units (try acceleration for instance) so we name after what the
units are measuring.

Also, we follow the hwmon naming convention, thus in this case where we
have the value in lux, it will be illuminance0_input



For naming of the other parameters the recent proposal of a tmd2771x driver
from Dongguen Kim is consistent and covers most of your attributs.

http://marc.info/?t=128453241000001&r=1&w=2

 
> +	&iio_dev_attr_ir.dev_attr.attr,
> +	&iio_dev_attr_proxim_ir.dev_attr.attr,
> +	NULL
> +};
> +
> +static const struct attribute_group isl29108_group = {
> +	.attrs = isl29018_attributes,
> +};
> +
> +static int isl29018_chip_init(struct i2c_client *client)
> +{
> +	struct isl29018_chip *chip = i2c_get_clientdata(client);
> +	int status;
> +	int i;
> +	int new_adc_bit;
> +	unsigned int new_range;
> +
> +	for (i = 0; i < ARRAY_SIZE(chip->reg_cache); i++)
> +		chip->reg_cache[i] = 0;
> +
> +	/* set defaults */
> +	status = isl29018_set_range(client, chip->range, &new_range);
> +	if (status < 0) {
> +		dev_err(&client->dev, "Init of isl29018 fails\n");
> +		return status;
> +	}
> +
> +	status = isl29018_set_resolution(client, chip->adc_bit,
> +						&new_adc_bit);
> +
> +	return 0;
> +}
> +
> +static int __devinit isl29018_probe(struct i2c_client *client,
> +			 const struct i2c_device_id *id)
> +{
> +	struct isl29018_chip *chip;
> +	int err;
> +
> +	chip = kzalloc(sizeof(struct isl29018_chip), GFP_KERNEL);
> +	if (!chip) {
> +		dev_err(&client->dev, "Memory allocation fails\n");
> +		err = -ENOMEM;
> +		goto exit;
> +	}
> +
> +	i2c_set_clientdata(client, chip);
> +	chip->client = client;
> +
> +	mutex_init(&chip->lock);
> +
> +	chip->range = 1000;
> +	chip->adc_bit = 16;
> +
> +	err = isl29018_chip_init(client);
> +	if (err)
> +		goto exit_free;
> +
> +	chip->indio_dev = iio_allocate_device();
> +	if (!chip->indio_dev) {
> +		dev_err(&client->dev, "iio allocation fails\n");
> +		goto exit_free;
> +	}
> +	chip->indio_dev->attrs = &isl29108_group;
> +	chip->indio_dev->dev.parent = &client->dev;
> +	chip->indio_dev->dev_data = (void *)(chip);
> +	chip->indio_dev->driver_module = THIS_MODULE;
> +	chip->indio_dev->modes = INDIO_DIRECT_MODE;
> +	err = iio_device_register(chip->indio_dev);
> +	if (err) {
> +		dev_err(&client->dev, "iio registration fails\n");
> +		goto exit_iio_free;
> +	}
> +
> +	return 0;
> +exit_iio_free:
> +	iio_free_device(chip->indio_dev);
> +exit_free:
> +	kfree(chip);
> +exit:
> +	return err;
> +}
> +
> +static int __devexit isl29018_remove(struct i2c_client *client)
> +{
> +	struct isl29018_chip *chip = i2c_get_clientdata(client);
> +
> +	dev_dbg(&client->dev, "%s()\n", __func__);
> +	iio_device_unregister(chip->indio_dev);
> +	kfree(chip);
> +
> +	return 0;
> +}
> +
> +static const struct i2c_device_id isl29018_id[] = {
> +	{"isl29018", 0},
> +	{}
> +};
> +
> +MODULE_DEVICE_TABLE(i2c, isl29018_id);
> +
> +static struct i2c_driver isl29018_driver = {
> +	.class	= I2C_CLASS_HWMON,
> +	.driver	 = {
> +			.name = "isl29018",
> +			.owner = THIS_MODULE,
> +		    },
> +	.probe	 = isl29018_probe,
> +	.remove	 = __devexit_p(isl29018_remove),
> +	.id_table = isl29018_id,
> +};
> +
> +static int __init isl29018_init(void)
> +{
> +	return i2c_add_driver(&isl29018_driver);
> +}
> +
> +static void __exit isl29018_exit(void)
> +{
> +	i2c_del_driver(&isl29018_driver);
> +}
> +
> +module_init(isl29018_init);
> +module_exit(isl29018_exit);
> +
> +MODULE_DESCRIPTION("ISL29018 Ambient Light Sensor driver");
> +MODULE_LICENSE("GPL");

--
To unsubscribe from this list: send the line "unsubscribe linux-i2c" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux GPIO]     [Linux SPI]     [Linux Hardward Monitoring]     [LM Sensors]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux