Since X86 lacks board config this drivers adds I2C devices to
a I2C bus. It adds the devices that will exists on Tunnel creek
In-Vehicle development boards.
So far only the TSC2007 is added.
Signed-off-by: Richard Röjfors <richard.rojfors@xxxxxxxxxxxxxx>
---
diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
index 0b591b6..74ef860 100644
--- a/drivers/misc/Kconfig
+++ b/drivers/misc/Kconfig
@@ -390,6 +390,16 @@ config BMP085
To compile this driver as a module, choose M here: the
module will be called bmp085.
+config TC_IVI_I2C_LOADER
+ tristate "Tunnel creek In-Vehicle I2C loader driver"
+ depends on I2C && GPIOLIB
+ help
+ If you say yes here you will get support for the Tunnel creek
+ In-Vehicle I2C loader driver.
+
+ Since X86 don't have any board config this driver adds I2C devices
+ to the I2C bus.
+
source "drivers/misc/c2port/Kconfig"
source "drivers/misc/eeprom/Kconfig"
source "drivers/misc/cb710/Kconfig"
diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile
index 255a80d..a64d07e 100644
--- a/drivers/misc/Makefile
+++ b/drivers/misc/Makefile
@@ -27,6 +27,7 @@ obj-$(CONFIG_ISL29003) += isl29003.o
obj-$(CONFIG_SENSORS_TSL2550) += tsl2550.o
obj-$(CONFIG_EP93XX_PWM) += ep93xx_pwm.o
obj-$(CONFIG_DS1682) += ds1682.o
+obj-$(CONFIG_TC_IVI_I2C_LOADER) += tc_ivi_i2c_loader.o
obj-$(CONFIG_TI_DAC7512) += ti_dac7512.o
obj-$(CONFIG_C2PORT) += c2port/
obj-$(CONFIG_IWMC3200TOP) += iwmc3200top/
diff --git a/drivers/misc/tc_ivi_i2c_loader.c b/drivers/misc/tc_ivi_i2c_loader.c
new file mode 100644
index 0000000..d1310ef
--- /dev/null
+++ b/drivers/misc/tc_ivi_i2c_loader.c
@@ -0,0 +1,114 @@
+/*
+ * Tunnel creek In-Vehicle I2C loader driver
+ * Copyright (c) 2010 Intel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/gpio.h>
+#include <linux/i2c.h>
+#include <linux/i2c/tsc2007.h>
+
+#define DRIVER_NAME "loader"
+
+static int i2c_bus = 1;
+static unsigned tsc2007_irq_pin = 102;
+
+static __devinitdata struct tsc2007_platform_data tsc2007_platform_data = {
+ .model = 2007,
+ .x_plate_ohms = 200
+};
+
+static __initdata struct i2c_board_info tsc2007_i2c_board_info = {
+ I2C_BOARD_INFO("tsc2007", 0x48),
+ .platform_data = &tsc2007_platform_data,
+ /* irq to be filled in runtime */
+};
+
+static struct i2c_client *tsc2007_client;
+
+static __init int loader_get_irq(unsigned gpio_pin)
+{
+ int err;
+
+ err = gpio_request(gpio_pin, DRIVER_NAME);
+ if (err)
+ return err;
+
+ err = gpio_direction_input(gpio_pin);
+ if (err)
+ goto err;
+
+ err = gpio_to_irq(gpio_pin);
+ if (err < 0)
+ goto err;
+
+ return err;
+err:
+ gpio_free(tsc2007_irq_pin);
+ return err;
+}
+
+static __init int loader_init(void)
+{
+ struct i2c_adapter *adapt;
+ int err;
+
+ adapt = i2c_get_adapter(i2c_bus);
+ if (!adapt) {
+ printk(KERN_ERR "%s: Failed to get I2C adapter\n", __func__);
+ return -ENODEV;
+ }
+
+ err = loader_get_irq(tsc2007_irq_pin);
+ if (err < 0)
+ goto put_adapter;
+ tsc2007_i2c_board_info.irq = err;
+
+ /* add in the devices on the bus */
+ tsc2007_client = i2c_new_device(adapt, &tsc2007_i2c_board_info);
+ if (!tsc2007_client)
+ goto free_tsc2007_pin;
+
+ i2c_put_adapter(adapt);
+
+ return 0;
+
+free_tsc2007_pin:
+ gpio_free(tsc2007_irq_pin);
+put_adapter:
+ i2c_put_adapter(adapt);
+
+ return err;
+}
+
+static void __exit loader_exit(void)
+{
+ i2c_unregister_device(tsc2007_client);
+}
+
+module_init(loader_init);
+module_exit(loader_exit);
+
+module_param(i2c_bus, int, 0);
+MODULE_PARM_DESC(i2c_bus,
+ "I2C bus where the I2C devices are connected, default = 1");
+
+module_param(tsc2007_irq_pin, uint, 0);
+MODULE_PARM_DESC(tsc2007_irq_pin,
+ "GPIO pin where the TSC2007 penIRQ is connected, default = 102");
+
+MODULE_DESCRIPTION("Tunnel creek In-Vehicle I2C loader driver");
+MODULE_AUTHOR("Pelagicore AB <info@xxxxxxxxxxxxxx>");
+MODULE_LICENSE("GPL v2");
--
To unsubscribe from this list: send the line "unsubscribe linux-i2c" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
