Kyungmin Park wrote: > > On Thu, Jul 29, 2010 at 6:42 PM, Kukjin Kim <kgene.kim@xxxxxxxxxxx> wrote: > > From: Naveen Krishna Ch <ch.naveen@xxxxxxxxxxx> > > > > This patch adds HAVE_S3C2410_I2C to control inclusion of I2C bus driver > > on Samsung SoCs and makes I2C bus driver dependency SoC specific instead > > of machine specific. This will enalbe all machines using Samsung > ARCH_S3C2410, > > _S3C64XX, _S5P6440, _S5PC100, and _S5PV210 to select the I2C driver by > default > > What's the different from use PLAT_SAMSUNG? > Hi, Hmm..the difference? I remember, already said to you... Anyway actually, there was a stuff in here about that. Please refer to following...it may answer on your question. --- From Ben Dooks > config RTC_DRV_S3C > tristate "Samsung S3C series SoC RTC" > - depends on ARCH_S3C2410 > + depends on ARCH_S3C2410 || ARCH_S3C64XX I wonder whether just making this depend on either S3C_DEV_RTC, or simply PLAT_SAMSUNG would just be a better choice. The S3C_DEV_RTC would mean that the drivers the core of the kernel would be built, but means that we can't speculatively build drivers if the kernel hasn't any machines using them. Making it depend on PLAT_SAMSUNG would mean it is available to all, but would be selectable even if there isn't a machine supporting it being built. The current situation would mean that we have to update driver Kconfig entries each time a new SoC turns up... We could also have a HAVE_RTC_DRV_S3C so that all SoCs supporting this coudl select it independant of whether there is machine support. --- It doesn't mean that we should use HAVE_XXX in this case... But this way is better _now_ and they used same method in several drivers. And if driver IP changes, we can use with HAVE_XXXV2... > config I2C_S3C2410 > tristate "S3C2410 I2C Driver" > depends on PLAT_SAMSUNG > > Please don't populate the Kconfigs. > I hope you stop talking same issue without alternative... > Thank you, > Kyungmin Park > > > > > Signed-off-by: Naveen Krishna Ch <ch.naveen@xxxxxxxxxxx> > > Signed-off-by: Kukjin Kim <kgene.kim@xxxxxxxxxxx> > > Cc: Ben Dooks <ben-linux@xxxxxxxxx> > > --- > > Changes since v2: > > - Added HAVE_S3C2410_I2C in drivers Kconfig > > - Made I2C bus driver dependency SoC specific > > - Selected additional support I2C bus driver for S5P6440, S5PC100, > > and S5PV210 > > > > Changes since v1: > > - Modifed the Kconfig help comments. > > > > arch/arm/Kconfig | 5 +++++ > > drivers/i2c/busses/Kconfig | 11 +++++++++-- > > 2 files changed, 14 insertions(+), 2 deletions(-) > > > > diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig > > index 98922f7..e922994 100644 > > --- a/arch/arm/Kconfig > > +++ b/arch/arm/Kconfig > > @@ -634,6 +634,7 @@ config ARCH_S3C2410 > > select ARCH_HAS_CPUFREQ > > select HAVE_CLK > > select ARCH_USES_GETTIMEOFFSET > > + select HAVE_S3C2410_I2C > > help > > Samsung S3C2410X CPU based systems, such as the Simtec > Electronics > > BAST (<http://www.simtec.co.uk/products/EB110ITX/>), the IPAQ 1940 > or > > @@ -663,6 +664,7 @@ config ARCH_S3C64XX > > select S3C_DEV_NAND > > select USB_ARCH_HAS_OHCI > > select SAMSUNG_GPIOLIB_4BIT > > + select HAVE_S3C2410_I2C > > help > > Samsung S3C64XX series based systems > > > > @@ -672,6 +674,7 @@ config ARCH_S5P6440 > > select GENERIC_GPIO > > select HAVE_CLK > > select ARCH_USES_GETTIMEOFFSET > > + select HAVE_S3C2410_I2C > > help > > Samsung S5P6440 CPU based systems > > > > @@ -691,6 +694,7 @@ config ARCH_S5PC100 > > select CPU_V7 > > select ARM_L1_CACHE_SHIFT_6 > > select ARCH_USES_GETTIMEOFFSET > > + select HAVE_S3C2410_I2C > > help > > Samsung S5PC100 series based systems > > > > @@ -701,6 +705,7 @@ config ARCH_S5PV210 > > select HAVE_CLK > > select ARM_L1_CACHE_SHIFT_6 > > select ARCH_USES_GETTIMEOFFSET > > + select HAVE_S3C2410_I2C > > help > > Samsung S5PV210/S5PC110 series based systems > > > > diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig > > index bceafbf..f1751da 100644 > > --- a/drivers/i2c/busses/Kconfig > > +++ b/drivers/i2c/busses/Kconfig > > @@ -521,12 +521,19 @@ config I2C_PXA_SLAVE > > is necessary for systems where the PXA may be a target on the > > I2C bus. > > > > +config HAVE_S3C2410_I2C > > + bool > > + help > > + This will include I2C support for Samsung SoCs. If you want to > > + include I2C support for any machine, kindly select this in the > > + respective Kconfig file. > > + > > config I2C_S3C2410 > > tristate "S3C2410 I2C Driver" > > - depends on ARCH_S3C2410 || ARCH_S3C64XX > > + depends on HAVE_S3C2410_I2C > > help > > Say Y here to include support for I2C controller in the > > - Samsung S3C2410 based System-on-Chip devices. > > + Samsung SoCs. > > > > config I2C_S6000 > > tristate "S6000 I2C support" > > -- Thanks. Best regards, Kgene. -- Kukjin Kim <kgene.kim@xxxxxxxxxxx>, Senior Engineer, SW Solution Development Team, Samsung Electronics Co., Ltd. -- To unsubscribe from this list: send the line "unsubscribe linux-i2c" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
