Fujitsu slightly changed the DMI strings in their recent machines, (for example the D2778) and this breaks the automatic loading of the needed fschmd driver. Being more tolerant on string comparison fixes the issue. This closes bug #15634: https://bugzilla.kernel.org/show_bug.cgi?id=15634 Signed-off-by: Jean Delvare <khali@xxxxxxxxxxxx> Tested-by: Sergey Spiridonov <sena@xxxxxxxxxxxxxxxxx> Cc: Hans de Goede <hdegoede@xxxxxxxxxx> --- drivers/i2c/busses/i2c-i801.c | 8 ++------ 1 file changed, 2 insertions(+), 6 deletions(-) --- linux-2.6.35-rc4.orig/drivers/i2c/busses/i2c-i801.c 2010-07-07 15:00:17.000000000 +0200 +++ linux-2.6.35-rc4/drivers/i2c/busses/i2c-i801.c 2010-07-08 18:00:51.000000000 +0200 @@ -655,7 +655,7 @@ static void __devinit dmi_check_onboard_ /* & ~0x80, ignore enabled/disabled bit */ if ((type & ~0x80) != dmi_devices[i].type) continue; - if (strcmp(name, dmi_devices[i].name)) + if (strcasecmp(name, dmi_devices[i].name)) continue; memset(&info, 0, sizeof(struct i2c_board_info)); @@ -704,9 +704,6 @@ static int __devinit i801_probe(struct p { unsigned char temp; int err, i; -#if defined CONFIG_SENSORS_FSCHMD || defined CONFIG_SENSORS_FSCHMD_MODULE - const char *vendor; -#endif I801_dev = dev; i801_features = 0; @@ -808,8 +805,7 @@ static int __devinit i801_probe(struct p } #endif #if defined CONFIG_SENSORS_FSCHMD || defined CONFIG_SENSORS_FSCHMD_MODULE - vendor = dmi_get_system_info(DMI_BOARD_VENDOR); - if (vendor && !strcmp(vendor, "FUJITSU SIEMENS")) + if (dmi_name_in_vendors("FUJITSU")) dmi_walk(dmi_check_onboard_devices, &i801_adapter); #endif -- Jean Delvare -- To unsubscribe from this list: send the line "unsubscribe linux-i2c" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
