Re: Controlling Driver Load Order

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Robert Emanuele wrote:
> Hi Wolfram,
> 
> I am using the i2c-gpio.c driver, not the i2c-at91 driver.  The Atmel
> folks have expressed concerns over their i2c silicon and wrote a gpio
> version.
> 
> Anyway, I better understand the subsys_initcall now and applied that
> to the i2c-gpio and my i2c chip driver.  That worked perfectly for my
> issue.  I'd be happy to return a patch of this.  Would be this the
> sort of thing that would benefit from a config option?  Something
> like:
> 
> #if defined(CONFIG_EARLY_i2C_GPIO)
> subsys_initcall(i2c_gpio_init);
> #else
> module_init(i2c_gpio_init);
> #endif

Looks like this has already been done:
http://www.mail-archive.com/linux-i2c@xxxxxxxxxxxxxxx/msg03056.html

There was a discussion a while back to make all of the embedded i2c
busses be subsys_initcall since i2c is often a system bus on embedded
devices. Looks the i2c_gpio driver got missed the first time round.

~Ryan

-- 
Bluewater Systems Ltd - ARM Technology Solution Centre

Ryan Mallon         		5 Amuri Park, 404 Barbadoes St
ryan@xxxxxxxxxxxxxxxx         	PO Box 13 889, Christchurch 8013
http://www.bluewatersys.com	New Zealand
Phone: +64 3 3779127		Freecall: Australia 1800 148 751
Fax:   +64 3 3779135			  USA 1800 261 2934
--
To unsubscribe from this list: send the line "unsubscribe linux-i2c" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux GPIO]     [Linux SPI]     [Linux Hardward Monitoring]     [LM Sensors]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux