Hi Chase,
On Mon, 17 May 2010 16:16:19 -0400, Chase Douglas wrote:
> The ACPI subsystem strictly checks for resource conflicts. When there's
> a conflict, it outputs a warning message with all the details needed to
> properly diagnose the underlying issue. However, the i2c-nforce2 driver
> also prints its own message. Not only is the message redundant, it is at
> the KERN_ERR level, which overrides some bootsplash screens for no good
> reason. This change removes the two lines that print out the error
> messages.
>
> Signed-off-by: Chase Douglas <chase.douglas@xxxxxxxxxxxxx>
> ---
> drivers/i2c/busses/i2c-nforce2.c | 2 --
> 1 files changed, 0 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/i2c/busses/i2c-nforce2.c b/drivers/i2c/busses/i2c-nforce2.c
> index 4a48dd4..2da9a23 100644
> --- a/drivers/i2c/busses/i2c-nforce2.c
> +++ b/drivers/i2c/busses/i2c-nforce2.c
> @@ -405,7 +405,6 @@ static int __devinit nforce2_probe(struct pci_dev *dev, const struct pci_device_
> /* SMBus adapter 1 */
> res1 = nforce2_probe_smb(dev, 4, NFORCE_PCI_SMB1, &smbuses[0], "SMB1");
> if (res1 < 0) {
> - dev_err(&dev->dev, "Error probing SMB1.\n");
> smbuses[0].base = 0; /* to have a check value */
> }
> /* SMBus adapter 2 */
> @@ -417,7 +416,6 @@ static int __devinit nforce2_probe(struct pci_dev *dev, const struct pci_device_
> res2 = nforce2_probe_smb(dev, 5, NFORCE_PCI_SMB2, &smbuses[1],
> "SMB2");
> if (res2 < 0) {
> - dev_err(&dev->dev, "Error probing SMB2.\n");
> smbuses[1].base = 0; /* to have a check value */
> }
> }
I agree that these messages are essentially redundant, as
nforce2_probe_smb() never fails without printing an message. Patch
applied, thanks.
--
Jean Delvare
--
To unsubscribe from this list: send the line "unsubscribe linux-i2c" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
