On Wed, 14 Apr 2010 13:54:02 +0100 Alan Cox wrote:
> Subject: [FOR COMMENT] cy8ctmg110 for review
>
> From: Samuli Konttila <samuli.konttila@xxxxxxxxxxxxxx>
>
> Add support for the cy8ctmg110 capacitive touchscreen used on some embedded
> devices.
>
> (Some clean up by Alan Cox)
>
> (No signed off, not yet ready to go in)
> ---
>
> drivers/input/touchscreen/Kconfig | 12 +
> drivers/input/touchscreen/Makefile | 3
> drivers/input/touchscreen/cy8ctmg110_ts.c | 521 +++++++++++++++++++++++++++++
> 3 files changed, 535 insertions(+), 1 deletions(-)
> create mode 100644 drivers/input/touchscreen/cy8ctmg110_ts.c
>
>
> diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig
> index b3ba374..89a3eb1 100644
> --- a/drivers/input/touchscreen/Kconfig
> +++ b/drivers/input/touchscreen/Kconfig
> @@ -591,4 +591,16 @@ config TOUCHSCREEN_TPS6507X
> To compile this driver as a module, choose M here: the
> module will be called tps6507x_ts.
>
> +config TOUCHSCREEN_CY8CTMG110
> + tristate "cy8ctmg110 touchscreen"
> + depends on I2C
depends on GPIOLIB
depends on INPUT
Does it build when CONFIG_PM is disabled?
> + help
> + Say Y here if you have a cy8ctmg110 touchscreen capacitive
> + touchscreen
drop first "touchscreen" and end with '.'.
> +
> + If unsure, say N.
> +
> + To compile this driver as a module, choose M here: the
> + module will be called cy8ctmg110_ts.
> +
> endif
> diff --git a/drivers/input/touchscreen/cy8ctmg110_ts.c b/drivers/input/touchscreen/cy8ctmg110_ts.c
> new file mode 100644
> index 0000000..4adbe87
> --- /dev/null
> +++ b/drivers/input/touchscreen/cy8ctmg110_ts.c
> @@ -0,0 +1,521 @@
> +/*
> + * cy8ctmg110_ts.c Driver for cypress touch screen controller
> + * Copyright (c) 2009 Aava Mobile
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
> + */
> +
> +#include <linux/module.h>
> +#include <linux/kernel.h>
> +#include <linux/input.h>
> +#include <linux/slab.h>
> +#include <linux/interrupt.h>
> +#include <asm/io.h>
> +#include <linux/i2c.h>
> +#include <linux/timer.h>
> +#include <linux/gpio.h>
> +#include <linux/hrtimer.h>
> +
> +#include <linux/platform_device.h>
> +#include <linux/delay.h>
> +#include <linux/fs.h>
> +#include <asm/ioctl.h>
> +#include <asm/uaccess.h>
> +#include <linux/device.h>
> +#include <linux/module.h>
> +#include <linux/platform_device.h>
> +#include <linux/delay.h>
> +#include <linux/fs.h>
> +#include <asm/ioctl.h>
> +#include <linux/fs.h>
> +#include <linux/init.h>
> +#include <linux/miscdevice.h>
> +#include <linux/module.h>
wow. Some of them are there 3 times. :(
> +
> +#define CY8CTMG110_DRIVER_NAME "cy8ctmg110"
> +
> +
> +/*HW definations*/
definitions
> +#define CY8CTMG110_RESET_PIN_GPIO 43
> +#define CY8CTMG110_IRQ_PIN_GPIO 59
> +#define CY8CTMG110_I2C_ADDR 0x38
> +#define CY8CTMG110_I2C_ADDR_EXT 0x39
> +#define CY8CTMG110_I2C_ADDR_ 0x2 /*i2c address first sample */
> +#define CY8CTMG110_I2C_ADDR__ 53 /*i2c address to FW where irq support missing */
> +#define CY8CTMG110_TOUCH_IRQ 21
> +#define CY8CTMG110_TOUCH_LENGHT 9787
> +#define CY8CTMG110_SCREEN_LENGHT 8424
> +
> +
> +/*Touch coordinates*/
> +#define CY8CTMG110_X_MIN 0
> +#define CY8CTMG110_Y_MIN 0
> +#define CY8CTMG110_X_MAX 864
> +#define CY8CTMG110_Y_MAX 480
> +
> +
> +/*cy8ctmg110 registers defination*/
definition
> +#define CY8CTMG110_TOUCH_WAKEUP_TIME 0
> +#define CY8CTMG110_TOUCH_SLEEP_TIME 2
> +#define CY8CTMG110_TOUCH_X1 3
> +#define CY8CTMG110_TOUCH_Y1 5
> +#define CY8CTMG110_TOUCH_X2 7
> +#define CY8CTMG110_TOUCH_Y2 9
> +#define CY8CTMG110_FINGERS 11
> +#define CY8CTMG110_GESTURE 12
> +#define CY8CTMG110_REG_MAX 13
> +
> +#define CY8CTMG110_POLL_TIMER_DELAY 1000*1000*100
better to use parens on expressions: (1000 * 1000 * 100)
> +#define TOUCH_MAX_I2C_FAILS 50
> +
> +/* Scale factors for coordinates */
> +#define X_SCALE_FACTOR 9387/8424
> +#define Y_SCALE_FACTOR 97/100
use parens. Oops, probably can't do that here, since:
+ y2 = (u16) (x * Y_SCALE_FACTOR);
you (== the code) want (x * 97) / 100.
Otherwise (with parens) it would be x * 0.
oh well.
> +
> +/* For tracing */
> +static int g_y_trace_coord = 0;
> +module_param(g_y_trace_coord, int, 0600);
> +
> +/* Polling mode */
> +static int polling = 0;
> +module_param(polling, int, 0);
> +MODULE_PARM_DESC(polling, "Set to enabling polling of the touchscreen");
s/enabling/enable/
> +
> +
> +/*
> + * The touch position structure.
> + */
> +struct ts_event {
> + int x1;
> + int y1;
> + int x2;
> + int y2;
> + bool event_sended;
bool event_sent;
> +};
> +
> +/*
> + * The touch driver structure.
> + */
> +struct cy8ctmg110 {
> + struct input_dev *input;
> + char phys[32];
> + struct ts_event tc;
> + struct i2c_client *client;
> + bool pending;
> + spinlock_t lock;
> + bool initController;
> + bool sleepmode;
> + int i2c_fail_count;
> + struct hrtimer timer;
> +};
> +
> +/*
> + * cy8ctmg110_poweroff is the routine that is called when touch hardware
> + * will powered off
> + */
> +static void cy8ctmg110_power(bool poweron)
> +{
> + if (poweron)
> + gpio_direction_output(CY8CTMG110_RESET_PIN_GPIO, 0);
> + else
> + gpio_direction_output(CY8CTMG110_RESET_PIN_GPIO, 1);
> +}
> +
> +/*
> + * cy8ctmg110_write_req write regs to the i2c devices
> + *
> + */
> +static int cy8ctmg110_write_req(struct cy8ctmg110 *tsc, unsigned char reg,
> + unsigned char len, unsigned char *value)
> +{
> + struct i2c_client *client = tsc->client;
> + unsigned int ret;
> + unsigned char i2c_data[] = { 0, 0, 0, 0, 0, 0 };
> + struct i2c_msg msg[] = {
> + {client->addr, 0, len + 1, i2c_data},
> + };
> +
> + i2c_data[0] = reg;
> + memcpy(i2c_data + 1, value, len);
> +
> + ret = i2c_transfer(client->adapter, msg, 1);
> + if (ret != 1) {
> + printk("cy8ctmg110 touch : i2c write data cmd failed \n");
Better to use DRIVER_NAME as prefix in messages.
> + return ret;
> + }
> + return 0;
> +}
> +
> +/*
> + * cy8ctmg110_read_req read regs from i2c devise
> + *
> + */
> +
> +static int cy8ctmg110_read_req(struct cy8ctmg110 *tsc,
> + unsigned char *i2c_data, unsigned char len, unsigned char cmd)
> +{
> + struct i2c_client *client = tsc->client;
> + unsigned int ret;
> + unsigned char regs_cmd[2] = { 0, 0 };
> + struct i2c_msg msg1[] = {
> + {client->addr, 0, 1, regs_cmd},
> + };
> + struct i2c_msg msg2[] = {
> + {client->addr, I2C_M_RD, len, i2c_data},
> + };
> +
> + regs_cmd[0] = cmd;
> +
> + /* first write slave position to i2c devices */
> + ret = i2c_transfer(client->adapter, msg1, 1);
> + if (ret != 1) {
> + tsc->i2c_fail_count++;
> + return ret;
> + }
> +
> + /* Second read data from position */
> + ret = i2c_transfer(client->adapter, msg2, 1);
> + if (ret != 1) {
> + tsc->i2c_fail_count++;
> + return ret;
> + }
> + return 0;
> +}
> +
> +/*
> + * cy8ctmg110_send_event delevery touch event to the userpace
> + * function use normal input interface
> + */
> +static void cy8ctmg110_send_event(void *tsc)
> +{
> + struct cy8ctmg110 *ts = tsc;
> + struct input_dev *input = ts->input;
> + u16 x, y;
> + u16 x2, y2;
> +
> + x = ts->tc.x1;
> + y = ts->tc.y1;
> +
> + if (ts->tc.event_sended == false) {
> + input_report_key(input, BTN_TOUCH, 1);
> + ts->pending = true;
> + x2 = (u16) (y * X_SCALE_FACTOR);
> + y2 = (u16) (x * Y_SCALE_FACTOR);
> + input_report_abs(input, ABS_X, x2);
> + input_report_abs(input, ABS_Y, y2);
> + input_sync(input);
> + if (g_y_trace_coord)
> + printk("cy8ctmg110 touch position X:%d (was = %d) Y:%d (was = %d)\n", x2, y, y2, x);
> + }
> +
> +}
> +
> +/*
> + * cy8ctmg110_touch_pos check touch position from i2c devices
> + *
> + */
> +static int cy8ctmg110_touch_pos(struct cy8ctmg110 *tsc)
> +{
> + unsigned char reg_p[CY8CTMG110_REG_MAX];
> + int x, y;
> +
> + memset(reg_p, 0, CY8CTMG110_REG_MAX);
> +
> + /*Reading coordinates */
> + if (cy8ctmg110_read_req(tsc, reg_p, 9, CY8CTMG110_TOUCH_X1) != 0)
> + return -EIO;
> +
> + y = reg_p[2] << 8 | reg_p[3];
> + x = reg_p[0] << 8 | reg_p[1];
> + /*number of touch */
> + if (reg_p[8] == 0) {
> + if (tsc->pending == true) {
> + struct input_dev *input = tsc->input;
> +
> + input_report_key(input, BTN_TOUCH, 0);
> + tsc->tc.event_sended = true;
> + tsc->pending = false;
> + }
> + } else if (tsc->tc.x1 != x || tsc->tc.y1 != y) {
> + tsc->tc.y1 = y;
> + tsc->tc.x1 = x;
> + tsc->tc.event_sended = false;
> + cy8ctmg110_send_event(tsc);
> + }
> + return 0;
> +}
> +
> +/*
> + * if interrupt isn't in use the touch positions can reads by polling
can be read
> + *
> + */
> +static enum hrtimer_restart cy8ctmg110_timer(struct hrtimer *handle)
> +{
> + struct cy8ctmg110 *ts = container_of(handle, struct cy8ctmg110, timer);
> + unsigned long flags;
> +
> + spin_lock_irqsave(&ts->lock, flags);
> +
> + cy8ctmg110_touch_pos(ts);
> + if (ts->i2c_fail_count < TOUCH_MAX_I2C_FAILS)
> + hrtimer_start(&ts->timer, ktime_set(0, CY8CTMG110_POLL_TIMER_DELAY), HRTIMER_MODE_REL);
> +
> + spin_unlock_irqrestore(&ts->lock, flags);
> + return HRTIMER_NORESTART;
> +}
> +
> +/*
> + * cy8ctmg110_init_controller set init value to touchcontroller
> + *
> + */
> +static bool cy8ctmg110_set_sleepmode(struct cy8ctmg110 *ts)
> +{
> + unsigned char reg_p[3];
> +
> + if (ts->sleepmode == true) {
> + reg_p[0] = 0x00;
> + reg_p[1] = 0xff;
> + reg_p[2] = 5;
> + } else {
> + reg_p[0] = 0x10;
> + reg_p[1] = 0xff;
> + reg_p[2] = 0;
> + }
> +
> + if (cy8ctmg110_write_req(ts, CY8CTMG110_TOUCH_WAKEUP_TIME, 3, reg_p))
> + return false;
> +
> + ts->initController = true;
> + return true;
> +}
> +
> +/*
> + * cy8ctmg110_irq_handler irq handling function
> + *
> + */
> +
> +static irqreturn_t cy8ctmg110_irq_handler(int irq, void *dev_id)
> +{
> + struct cy8ctmg110 *tsc = (struct cy8ctmg110 *) dev_id;
> +
> + if (tsc->initController == false) {
> + if (cy8ctmg110_set_sleepmode(tsc) == true)
> + tsc->initController = true;
> + } else
> + cy8ctmg110_touch_pos(tsc);
> +
> + /* if interrupt supported in the touch controller
> + timer polling need to stop */
> + tsc->i2c_fail_count = TOUCH_MAX_I2C_FAILS;
> + return IRQ_HANDLED;
> +}
> +
> +
> +static int cy8ctmg110_probe(struct i2c_client *client, const struct i2c_device_id *id)
> +{
> + struct cy8ctmg110 *ts;
> + struct input_dev *input_dev;
> + int err;
> + client->irq = CY8CTMG110_TOUCH_IRQ;
> +
> + if (!i2c_check_functionality(client->adapter,
> + I2C_FUNC_SMBUS_READ_WORD_DATA))
> + return -EIO;
> +
> + ts = kzalloc(sizeof(struct cy8ctmg110), GFP_KERNEL);
> + input_dev = input_allocate_device();
> +
> + if (!ts || !input_dev) {
> + err = -ENOMEM;
> + goto err_free_mem;
> + }
> +
> + ts->client = client;
> + i2c_set_clientdata(client, ts);
> +
> + ts->input = input_dev;
> + ts->pending = false;
> + ts->sleepmode = false;
> +
> + snprintf(ts->phys, sizeof(ts->phys), "%s/input0",
> + dev_name(&client->dev));
> +
> + input_dev->name = CY8CTMG110_DRIVER_NAME " Touchscreen";
> + input_dev->phys = ts->phys;
> + input_dev->id.bustype = BUS_I2C;
> +
> + spin_lock_init(&ts->lock);
> +
> + input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REP) |
> + BIT_MASK(EV_REL) | BIT_MASK(EV_ABS);
> + input_dev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH);
> +
> + input_set_capability(input_dev, EV_KEY, KEY_F);
> +
> + input_set_abs_params(input_dev, ABS_X, CY8CTMG110_X_MIN, CY8CTMG110_X_MAX, 0, 0);
> + input_set_abs_params(input_dev, ABS_Y, CY8CTMG110_Y_MIN, CY8CTMG110_Y_MAX, 0, 0);
> +
> + err = gpio_request(CY8CTMG110_RESET_PIN_GPIO, NULL);
> +
> + if (err) {
> + dev_err(&client->dev, "cy8ctmg110_ts: Unable to request GPIO pin %d.\n",
> + CY8CTMG110_RESET_PIN_GPIO);
> + goto err_free_irq;
> + }
> + cy8ctmg110_power(true);
> +
> + ts->initController = false;
> + ts->i2c_fail_count = 0;
> +
> + hrtimer_init(&ts->timer, CLOCK_MONOTONIC, HRTIMER_MODE_REL);
> + ts->timer.function = cy8ctmg110_timer;
> +
> + if (polling)
> + hrtimer_start(&ts->timer, ktime_set(10, 0), HRTIMER_MODE_REL);
> +
> + /* Can we fall back to polling if these bits fail - something to look
> + at for robustness */
> +
> + err = gpio_request(CY8CTMG110_IRQ_PIN_GPIO, "touch_irq_key");
> + if (err < 0) {
> + dev_err(&client->dev,
> + "cy8ctmg110_ts: failed to request GPIO %d, error %d\n",
> + CY8CTMG110_IRQ_PIN_GPIO, err);
> + goto err_free_timer;
> + }
> +
> + err = gpio_direction_input(CY8CTMG110_IRQ_PIN_GPIO);
> +
> + if (err < 0) {
> + dev_err(&client->dev,
> + "cy8ctmg110_ts: failed to configure input direction for GPIO %d, error %d\n",
> + CY8CTMG110_IRQ_PIN_GPIO, err);
> + goto err_free_gpio;
> + }
> + client->irq = gpio_to_irq(CY8CTMG110_IRQ_PIN_GPIO);
> +
> + if (client->irq < 0) {
> + err = client->irq;
> + dev_err(&client->dev,
> + "cy8ctmg110_ts: Unable to get irq number" " for GPIO %d, error %d\n",
> + CY8CTMG110_IRQ_PIN_GPIO, err);
> + goto err_free_gpio;
> + }
> + err = request_irq(client->irq, cy8ctmg110_irq_handler, IRQF_TRIGGER_RISING | IRQF_SHARED, "touch_reset_key", ts);
> + if (err < 0) {
> + dev_err(&client->dev,
> + "cy8ctmg110 irq %d busy? error %d\n",
> + client->irq, err);
> + goto err_free_gpio;
> + }
> +
> + err = input_register_device(input_dev);
> + if (!err)
> + return 0;
> +err_free_gpio:
> + gpio_free(CY8CTMG110_IRQ_PIN_GPIO);
> +err_free_timer:
> + if (polling)
> + hrtimer_cancel(&ts->timer);
> +err_free_irq:
> + free_irq(client->irq, ts);
> +err_free_mem:
> + input_free_device(input_dev);
> + kfree(ts);
> + return err;
> +}
> +
> +/*
> + * cy8ctmg110_suspend
> + *
> + */
> +
> +static int cy8ctmg110_suspend(struct i2c_client *client, pm_message_t mesg)
> +{
> + if (device_may_wakeup(&client->dev))
> + enable_irq_wake(client->irq);
> +
> + return 0;
> +}
> +
> +/*
> + * cy8ctmg110_resume
> + *
> + */
> +
> +static int cy8ctmg110_resume(struct i2c_client *client)
> +{
> + if (device_may_wakeup(&client->dev))
> + disable_irq_wake(client->irq);
> +
> + return 0;
> +}
> +
> +/*
> + * cy8ctmg110_remove
> + *
> + */
> +
> +static int cy8ctmg110_remove(struct i2c_client *client)
> +{
> + struct cy8ctmg110 *ts = i2c_get_clientdata(client);
> +
> + cy8ctmg110_power(false);
> +
> + if (polling)
> + hrtimer_cancel(&ts->timer);
> + free_irq(client->irq, ts);
> + input_unregister_device(ts->input);
> + /* FIXME: Do we need to free the GPIO ? */
> + kfree(ts);
> + return 0;
> +}
> +
> +static struct i2c_device_id cy8ctmg110_idtable[] = {
> + {CY8CTMG110_DRIVER_NAME, 1},
> + {}
> +};
> +
> +MODULE_DEVICE_TABLE(i2c, cy8ctmg110_idtable);
> +
> +static struct i2c_driver cy8ctmg110_driver = {
> + .driver = {
> + .owner = THIS_MODULE,
> + .name = CY8CTMG110_DRIVER_NAME,
> + .bus = &i2c_bus_type,
> + },
> + .id_table = cy8ctmg110_idtable,
> + .probe = cy8ctmg110_probe,
> + .remove = cy8ctmg110_remove,
> + .suspend = cy8ctmg110_suspend,
> + .resume = cy8ctmg110_resume,
> +};
---
~Randy
--
To unsubscribe from this list: send the line "unsubscribe linux-i2c" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
