[PATCH 3/4] liss331d1: accelerometer driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Kalhan Trisal <kalhan.trisal@xxxxxxxxx>

The acceleremeter driver reads the x,y,z coordinate registers and provides
the information to user through the input layer

Conversion to input device, clean up and porting of retry fixes needed
for AAVA done by Alan Cox.

Signed-off-by: Kalhan Trisal <kalhan.trisal@xxxxxxxxx>
Signed-off-by: Alan Cox <alan@xxxxxxxxxxxxxxx>
---

 drivers/hwmon/Kconfig    |    8 +
 drivers/hwmon/Makefile   |    1 
 drivers/hwmon/lis331dl.c |  286 ++++++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 295 insertions(+), 0 deletions(-)
 create mode 100644 drivers/hwmon/lis331dl.c


diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index 1fa2533..6868b9d 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -1104,6 +1104,14 @@ config SENSORS_ISL29020
 	  Range values can be configured using sysfs.
 	  Lux data is accessible via sysfs.
 
+config SENSORS_LIS331DL
+	tristate "STMicroeletronics LIS331DL three-axis digital accelerometer"
+	depends on I2C
+	help
+	  If you say yes here you get support for the Accelerometer  Devices
+	  Device can be configured using sysfs.
+	  x y Z data can be   accessible via sysfs.
+
 if ACPI
 
 comment "ACPI drivers"
diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile
index 13d6832..ebeb2a2 100644
--- a/drivers/hwmon/Makefile
+++ b/drivers/hwmon/Makefile
@@ -60,6 +60,7 @@ obj-$(CONFIG_SENSORS_K10TEMP)	+= k10temp.o
 obj-$(CONFIG_SENSORS_LIS3LV02D) += lis3lv02d.o hp_accel.o
 obj-$(CONFIG_SENSORS_LIS3_SPI)	+= lis3lv02d.o lis3lv02d_spi.o
 obj-$(CONFIG_SENSORS_LIS3_I2C)	+= lis3lv02d.o lis3lv02d_i2c.o
+obj-$(CONFIG_SENSORS_LIS331DL)	+= lis331dl.o
 obj-$(CONFIG_SENSORS_LM63)	+= lm63.o
 obj-$(CONFIG_SENSORS_LM70)	+= lm70.o
 obj-$(CONFIG_SENSORS_LM73)	+= lm73.o
diff --git a/drivers/hwmon/lis331dl.c b/drivers/hwmon/lis331dl.c
new file mode 100644
index 0000000..34009eb
--- /dev/null
+++ b/drivers/hwmon/lis331dl.c
@@ -0,0 +1,286 @@
+/*
+ * lis331dl.c - ST LIS331DL  Accelerometer Driver
+ *
+ * Copyright (C) 2009 Intel Corp
+ *
+ *  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
+ * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/i2c.h>
+#include <linux/err.h>
+#include <linux/delay.h>
+#include <linux/mutex.h>
+#include <linux/sysfs.h>
+#include <linux/input-polldev.h>
+
+
+#define POLL_INTERVAL	50
+
+struct lis331dl {
+	struct input_polled_dev *idev;
+	struct i2c_client *client;
+	struct mutex update_lock;
+};
+
+static ssize_t data_rate_show(struct device *dev,
+			struct device_attribute *attr, char *buf)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	int val;
+	int speed = 100;
+
+	val = i2c_smbus_read_byte_data(client, 0x20);
+	if (val & 0x80); /* 1= 400HZ 0= 100HZ */
+		speed = 400;
+	return sprintf(buf, "%d\n", speed);
+}
+
+static ssize_t power_mode_show(struct device *dev,
+			struct device_attribute *attr, char *buf)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	int val;
+
+	val = i2c_smbus_read_byte_data(client, 0x20) & 0x40;
+	if (val == 0x40)
+		val = 1;
+	return sprintf(buf, "%d\n", val);
+}
+
+static int read_with_retries(struct i2c_client *client, int r)
+{
+	int retries;
+	int ret;
+	
+	for (retries = 0; retries < 5; retries++) {
+		ret = i2c_smbus_read_byte_data(client, r);
+		if (ret != -ETIMEDOUT)
+			break;
+		msleep(10);
+	}
+	return ret;
+}
+
+static void lis331dl_poll(struct input_polled_dev *idev)
+{
+	struct input_dev *input = idev->input;
+	struct lis331dl *data = idev->private;
+	int x, y, z;
+	struct i2c_client *client = data->client;
+
+	x = read_with_retries(client, 0x29);
+	y = read_with_retries(client, 0x2B);
+	z = read_with_retries(client, 0x2D);
+
+	input_report_abs(input, ABS_X, x);
+	input_report_abs(input, ABS_Y, y);
+	input_report_abs(input, ABS_Z, z);
+	input_sync(input);
+}
+
+static ssize_t data_rate_store(struct device *dev,
+		struct device_attribute *attr, const char *buf, size_t count)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct lis331dl *data = i2c_get_clientdata(client);
+	unsigned int ret_val;
+	unsigned long val;
+
+	if (strict_strtoul(buf, 10, &val))
+		return -EINVAL;
+
+	mutex_lock(&data->update_lock);
+
+	ret_val = i2c_smbus_read_byte_data(client, 0x20);
+	ret_val &= 0x7F;
+
+	switch (val) {
+	case 400:
+		ret_val |= 0x80;
+	case 100:
+		i2c_smbus_write_byte_data(client, 0x20, ret_val);
+		break;
+	default:		
+		mutex_unlock(&data->update_lock);
+		return -EINVAL;
+	}
+	mutex_unlock(&data->update_lock);
+	return count;
+}
+
+static ssize_t power_mode_store(struct device *dev,
+		struct device_attribute *attr, const  char *buf, size_t count)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct lis331dl *data = i2c_get_clientdata(client);
+	unsigned int ret_val;
+	unsigned long val;
+
+	if (strict_strtoul(buf, 10, &val))
+		return -EINVAL;
+
+	mutex_lock(&data->update_lock);
+
+	ret_val = i2c_smbus_read_byte_data(client, 0x20);
+	ret_val &= 0xBF;
+	
+	switch(val) {
+	case 1:
+		ret_val |= 0x40;
+	case 0:
+		i2c_smbus_write_byte_data(client, 0x20, ret_val);
+		break;
+	default:
+		mutex_unlock(&data->update_lock);
+		return -EINVAL;
+	}
+	mutex_unlock(&data->update_lock);
+	return count;
+}
+
+static DEVICE_ATTR(data_rate, S_IRUGO | S_IWUSR,
+	data_rate_show, data_rate_store);
+static DEVICE_ATTR(power_state, S_IRUGO | S_IWUSR,
+	power_mode_show, power_mode_store);
+
+static struct attribute *mid_att_accelero[] = {
+	&dev_attr_data_rate.attr,
+	&dev_attr_power_state.attr,
+	NULL
+};
+
+static struct attribute_group m_accelero_gr = {
+	.name = "lis331dl",
+	.attrs = mid_att_accelero
+};
+
+static void accel_set_default_config(struct i2c_client *client)
+{
+	i2c_smbus_write_byte_data(client, 0x20, 0x47);
+}
+
+static int  lis331dl_probe(struct i2c_client *client,
+					const struct i2c_device_id *id)
+{
+	int res;
+	struct lis331dl *data;
+	struct input_polled_dev *idev;
+	struct input_dev *input;
+
+	data = kzalloc(sizeof(struct lis331dl), GFP_KERNEL);
+	if (data == NULL) {
+		dev_err(&client->dev, "lis331dl: out of memory\n");
+		return -ENOMEM;
+	}
+	mutex_init(&data->update_lock);
+	i2c_set_clientdata(client, data);
+	data->client = client;
+
+	res = sysfs_create_group(&client->dev.kobj, &m_accelero_gr);
+	if (res) {
+		dev_err(&client->dev, "lis331dl: sysfs  group failed\n");
+		goto accelero_error1;
+	}
+	idev = input_allocate_polled_device();
+	if (!idev) {
+		res = -ENOMEM;
+		dev_err(&client->dev,
+			"lis331dl: unable to register input device\n");
+		goto accelero_error2;
+	}
+	idev->poll = lis331dl_poll;
+	idev->poll_interval = POLL_INTERVAL;
+
+	idev->private = data;
+	data->idev =  idev;
+
+	input = idev->input;
+	input->name = "lis331dl";
+	input->phys = "lis331dl/input0";
+	input->id.bustype = BUS_I2C;
+	input->dev.parent = &client->dev;
+	input->evbit[0] = BIT_MASK(EV_ABS);
+	input_set_abs_params(input, ABS_X, 0, 255, 2, 2);
+	input_set_abs_params(input, ABS_Y, 0, 255, 2, 2);
+	input_set_abs_params(input, ABS_Z, 0, 255, 2, 2);
+
+	res = input_register_polled_device(idev);
+	if (res == 0) {
+		dev_info(&client->dev,
+			"%s lis331dl:  Accelerometer chip found",
+							client->name);
+		return 0;
+	}
+	input_free_polled_device(idev);
+accelero_error2:
+	sysfs_remove_group(&client->dev.kobj, &m_accelero_gr);
+accelero_error1:
+	i2c_set_clientdata(client, NULL);
+	kfree(data);
+	return res;
+}
+
+static int lis331dl_remove(struct i2c_client *client)
+{
+	struct lis331dl *data = i2c_get_clientdata(client);
+
+	input_unregister_polled_device(data->idev);
+	input_free_polled_device(data->idev);
+	sysfs_remove_group(&client->dev.kobj, &m_accelero_gr);
+	kfree(data);
+	return 0;
+}
+
+static struct i2c_device_id lis331dl_id[] = {
+	{ "i2c_accel", 0 },
+	{ }
+};
+
+MODULE_DEVICE_TABLE(i2c, lis331dl_id);
+
+static struct i2c_driver lis331dl_driver = {
+	.driver = {
+	.name = "lis331dl",
+	},
+	.probe = lis331dl_probe,
+	.remove = lis331dl_remove,
+	.id_table = lis331dl_id,
+};
+
+static int __init sensor_lis331dl_init(void)
+{
+	int res;
+
+	res = i2c_add_driver(&lis331dl_driver);
+	return res;
+}
+
+static void  __exit sensor_lis331dl_exit(void)
+{
+	i2c_del_driver(&lis331dl_driver);
+}
+
+module_init(sensor_lis331dl_init);
+module_exit(sensor_lis331dl_exit);
+
+MODULE_AUTHOR("Kalhan Trisal <kalhan.trisal@xxxxxxxxx>, Alan Cox");
+MODULE_DESCRIPTION("STMicroelectronics LIS331DL Accelerometer Driver");
+MODULE_LICENSE("GPL v2");

--
To unsubscribe from this list: send the line "unsubscribe linux-i2c" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [Linux GPIO]     [Linux SPI]     [Linux Hardward Monitoring]     [LM Sensors]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux